Service für Gigaset GS270

Gigaset GS270
Willkommen beim Kundenservice für Ihr Gigaset GS270. Auf dieser Seite finden Sie Antworten zu häufig gestellten Fragen. Sowohl Bedienungsanleitungen wie auch Soft- und Firmware stehen zum herunterladen bereit. Ebenfalls finden Sie hier Videotutorials, die Ihnen bei der Einrichtung helfen. Wenn Ihr Produkt einen Defekt aufweist, können Sie Ihr Gigaset GS270 zur Reparatur anmelden. Außerdem finden Sie hier ubehör für Ihr Gigaset GS270. Sollten Sie nach Produkten für Ihr Gigaset GS270 suchen, finden Sie Informationen dazu in unserer Kompatibilitätsdatenbank. Hier finden Sie auch Hilfestellung zum Registrieren Ihres Gigaset GS270 mit anderen Geräten.

Antworten auf häufig gestellte Fragen

Sie haben Fragen zu Ihrem Gigaset Produkt? Hier erhalten Sie Antworten.

Top 10 FAQs

  • You can use safe mode to start your device with only the original software and apps that came with your device. Some apps that you can download may cause your device to freezing, crashing, be slow or keep restarting itself. If the problem does not happen in safe mode, the problem is probably caused by a third-party app downloaded on your Gigaset device.

    If your device is on, follow these steps to reboot to safe mode:
    1. Press & hold the Power button.
    2. In the box that opens, touch & hold Power off.
    3. You’ll see a “Reboot to safe mode” box. Tap OK.
    4. Your Gigaset device will start in safe mode. You'll see the words "Safe mode" in a box at the bottom of the display.

    Now, use the Gigaset device normally and see if the problem still happens in safe mode. Remember that you can use only original apps in safe mode, not any downloaded apps.


    To Exit the safe mode just restart the Gigaset device.

  • Yes, you can used 2 SIM cards at the same time.
    Please note that a maximum of two cards will be allowed in the card slot.
    For example: sim card + sim card or sim card + SD card. The combination 2 sim cards + 1 sd card is not supported.

  • Go to "Settings" > "System" > "Reset options" > "Erase all data(factory reset)" and then tap "Reset phone"

    Please Note:
    Make sure to back up your phone data before restoring factory settings.

  • No, this Gigaset smartphone does not supports the NFC function.

  • Nano SIM card

  • up to 128GB

  • Go to "Settings" - "Apps & Notifications", tap on each app, then tap "Clear data" or "Clear cache". Alternative solution: Install a third-party management app and use "One-touch optimise" or the like to quickly clear junk files (data) produced by the apps.

  • Insert the SIM card, go to "Settings" > "Network & Internet" > "Mobile network" > "Preferred network type" to select a network type.

    Set the network type to "2G" in urban or rural areas with poor 3G or 4G signal coverage can resolve failures such as call drops and intermittences caused by the switchover among 3G, 4G land 2G signals.

  • Was kann ich tun, wenn das Gigaset Smartphone unter Windows 10 nicht richtig erkannt wird?
  • Check your 'Display Category' and/or 'Contacts' are selected in the settings menu. Go to "Contacts", tap "Contacts Settings", then "Contacts to display", to set the categories to display, e.g. "All contacts".

alle FAQs nach Themen

  • A
    • Apps
      • Please open in the "Settings" - "Network & Internet" the menue item "Data usage" to check the used data volume.

      • Go to "Settings" - "Apps & Notifications", tap on each app, then tap "Clear data" or "Clear cache". Alternative solution: Install a third-party management app and use "One-touch optimise" or the like to quickly clear junk files (data) produced by the apps.

      • Apps running in the background taking too much memory, causing the system slow-down, operating seizure, app non-startups, app auto exit, app crashes, etc.

        Help:
        1. Hold or tap the "Multitasking button" to bring up recently used apps, then tap on the option "Close all"
        2. Install a third-party app to quickly exit all apps running in the background with a single touch. 

    • Allgemein
      • No, this Gigaset smartphone does not supports the NFC function.

      • Head: 0,345 W/kg (10g)
        Body: 1,240 W/kg (10g)

  • B
    • Backup & Restore
      • Go to "Settings" > "System" > "Reset options" > "Erase all data(factory reset)" and then tap "Reset phone"

        Please Note:
        Make sure to back up your phone data before restoring factory settings.

      • To transfer all your important data from an iOS device to your new Android™ phone, you should first back up your contacts to a Google Account:

         


        1. create a Google Account
        2. connect your iPhone to your computer
        3. open iTunes and click the Info tab
        4. select Contacts from the drop-down menu

        As soon as you enter your account credentials, the contacts stored on your iPhone will be copied to your Google Account. When you set up your new Android™ phone, your data is automatically transferred to your new Android™ phone when you sign in your Google Account. To take your photos, music and video files with you when you switch from iOS to Android™ to your new phone, you should sync your iPhone with iTunes.

         



        Transfer photos, videos and music


        Videos and music can be downloaded to the Android™ smartphone via Tunesync app. Photos can be stored temporarily on your computer via USB cable and inserted into a directory of the Android™ device via drag & drop.

         


        The changeover is quick and easy if you use the online photo service Picasa. Install the app on your iPhone and upload your photos to the Google service. The Google+ app lets you quickly find your photos on your new Android™ smartphone.

      • How to create a backup of data and settings?
      • How to create a backup of my WhatsApp chats and media?
      • Google has introduced a new security feature in Android version 5.1 that is designed to protect smartphones even if they are stolen and the thief performs a factory reset.

        In this case, all data is normally deleted from the device and the phone is reset to its factory defaults.

        However, in order to prevent unauthorized access to the smartphone, Google has introduced the so-called "Android Factory Reset Protection" (FRP). This means that after a factory reset, the last Google account used on the device is requested before the smartphone can be used again.


        A factory reset does not help a thief much, because even afterwards the device is not yet freely accessible.

         

        Only after entering of the Google credentials smartphone unlocked again.

         



        If the security message appears and the security code or Google account is no longer known, you only have the option to restore your credentials via Google.

         

        Link to Google Support:

        https://support.google.com/accounts/troubleshooter/2402620">https://support.google.com/accounts/troubleshooter/2402620

    • Bluetooth
      • No, it does not support the (r)SAP profile.

  • C
    • Camera
      • Main camera: 13 Megapixel Front camera: 5 Megapixel

    • Contacts
      • Check your 'Display Category' and/or 'Contacts' are selected in the settings menu. Go to "Contacts", tap "Contacts Settings", then "Contacts to display", to set the categories to display, e.g. "All contacts".

  • D
  • N
    • NFC function
      • No, this Gigaset smartphone does not supports the NFC function.

  • S
    • Sensors
      • Answer the incomming call
        Unlock the phone
        Unlock to the app by request
        Capture photo
        Shut down the alarm
        Open an app or contact
        Scrolling function for browsing(only with Gigaset GS170/GS270/GS270 plus)

      • - Fingerprint sensor
        - Position sensor
        - Proximity sensor
        - Brightness sensor

    • SIM cards
      • Yes, you can used 2 SIM cards at the same time.
        Please note that a maximum of two cards will be allowed in the card slot.
        For example: sim card + sim card or sim card + SD card. The combination 2 sim cards + 1 sd card is not supported.

      • Insert the SIM card, go to "Settings" > "Network & Internet" > "Mobile network" > "Preferred network type" to select a network type.

        Set the network type to "2G" in urban or rural areas with poor 3G or 4G signal coverage can resolve failures such as call drops and intermittences caused by the switchover among 3G, 4G land 2G signals.

      • Nano SIM card

    • Storage
      • up to 128GB

    • Security
      • No, our smartphone products GS160, GS170, GS270, GS270 plus, GS370 and GS370 plus are not affected by the Specter and Meltdown vulnerabilities!

    • SMS
    • Settings / Using / Handling
      • No, this Gigaset smartphone does not supports the NFC function.

      • To activate/deactivate the function 'Wi-Fi Calling' in Android 8.1, please proceed as follows:

        - Open the Phone app
        - in the Phone app tap on the three dots in the top right corner to open the menu
        - Open Settings
        - Open Calling accounts
        - Select the provider
        - Enable or disable 'Wi-Fi Calling'



  • T
    • Troubleshooting
      • You can use safe mode to start your device with only the original software and apps that came with your device. Some apps that you can download may cause your device to freezing, crashing, be slow or keep restarting itself. If the problem does not happen in safe mode, the problem is probably caused by a third-party app downloaded on your Gigaset device.

        If your device is on, follow these steps to reboot to safe mode:
        1. Press & hold the Power button.
        2. In the box that opens, touch & hold Power off.
        3. You’ll see a “Reboot to safe mode” box. Tap OK.
        4. Your Gigaset device will start in safe mode. You'll see the words "Safe mode" in a box at the bottom of the display.

        Now, use the Gigaset device normally and see if the problem still happens in safe mode. Remember that you can use only original apps in safe mode, not any downloaded apps.


        To Exit the safe mode just restart the Gigaset device.

Downloads

Hier erhalten Sie Bedienungsanleitungen und Software-Updates.
Manuals
Firmware
  • Gigaset GS270 - Systemaktualisierung Android™ 8 Version S141 02/2021

    Verbesserungen und Änderungen mit Version S141:

    • Neues Google Sicherheitsupdate Stand: Januar 2021

    Hinweis:

    • Um die Sicherheit Ihrer persönlichen Informationen sicherzustellen und Ihnen die umfassenden Vorteile von Android 8.1 in Bezug auf die verbesserte Benutzerfreundlichkeit bieten zu können, ist es erforderlich, dass Sie Ihr Fingerabdruckprofil sowie das WLAN-Passwort erneut abspeichern. Bitte beachten Sie, dass diese Anpassungen ggf. auch Auswirkungen auf die von Ihnen genutzten Apps haben könnten.
    • Ihre Persönlichen Daten werden nicht gelöscht. Wir empfehlen Ihnen dennoch, wichtige Daten vor dem Aktualisieren zu sichern.
    • Weitere Informationen hierzu finden Sie in unserem Service portal. Der Link zum Download(pdf Dokument) der Release Notes lautet: System update Android™ 8.1 Oreo™
    Download
  • Gigaset GS270 - Systemaktualisierung Android™ 8 Version S139 11/2020

    Verbesserungen und Änderungen mit Version S139:

    • Neues Google Sicherheitsupdate Stand: Oct 2020
    • FOTA APK aktualisiert
    Download
  • Gigaset GS270 - Systemaktualisierung Android™ 8 Version S138 08/2020

    Verbesserungen und Änderungen mit Version S138:

    • Neues Google Sicherheitsupdate Stand: Juli 2020
    Download
  • Gigaset GS270 - Systemaktualisierung Android™ 8 Version S136 03/2020

    Verbesserungen und Änderungen mit Version S136:

    • Neues Google Sicherheitsupdate Stand: Februar 2020
    • Funktionsverbesserungen
    Download
  • Gigaset GS270 - Systemaktualisierung Android™ 8 Version S135 11/2019

    Verbesserungen und Änderungen mit Version S135:

    • Neues Google Sicherheitsupdate Stand: Oktober 2019
    • System Fehlerkorrekturen
    • Erneuerung der “Uhr“-App: Bitte fügen Sie die Uhr aus dem Widget manuell hinzu.
    Download
  • Gigaset GS270 - Systemaktualisierung Android™ 8 Version S132 05/2019

    Systemaktualisierung auf Version S132


    Verbesserungen für Version S132

    • Neues Google Sicherheitsupdate Stand: März 2019
    • Leistung und Stabilität optimiert


    Hinweis:

    • Ihre Persönlichen Daten werden nicht gelöscht. Wir empfehlen Ihnen dennoch, wichtige Daten vor dem Aktualisieren zu sichern.


    Verfügbare Softwareaktualisierungen für Ihr Gerät können Sie jederzeit unter „Einstellungen – System - Über das Telefon - Systemaktualisierungen“ einsehen und abrufen.

    Zur Durchführung der Aktualisierung stellen Sie bitte sicher, dass Ihr Gerät über ausreichende Ladekapazität verfügt. Um das Datenvolumen nicht zu belasten, empfehlen wir die Durchführung der Aktualisierung über eine stabile WiFi Verbindung.

    Google ist eine eingetragene Marke der Google LLC. Oreo ist eine eingetragene Handelsmarke der Mondelez International, Inc. Group.

    Download
  • Gigaset GS270/GS270 plus - Systemaktualisierung Android™ 7 auf 8 Version S131 02/2019

    Systemaktualisierung Android™ 8.1 Oreo™


    Verbesserungen für Version S131:

    • Leistung und Stabilität optimiert
    • Verbesserung der Bedienoberfläche (Übersetzungen optimiert)
    • Diverse Fehlerbehebungen und Detailverbesserungen
    • Batterieanzeige von verbundenen Bluetooth Geräten
    • Warnung bei Apps mit hohem Stromverbrauch
    • Anzeige der zu erwartenden Geschwindigkeiten von öffentlichen Hotspots
    • Android Sicherheitsaktualisierung vom 05. November 2018


    Hinweis:

    • Um die Sicherheit Ihrer persönlichen Informationen sicherzustellen und Ihnen die umfassenden Vorteile von Android 8.1 in Bezug auf die verbesserte Benutzerfreundlichkeit bieten zu können, ist es erforderlich, dass Sie das WLAN-Passwort erneut abspeichern. Bitte beachten Sie, dass diese Anpassungen ggf. auch Auswirkungen auf die von Ihnen genutzten Apps haben könnten.
    • Ihre Persönlichen Daten werden nicht gelöscht. Wir empfehlen Ihnen dennoch, wichtige Daten vor dem Aktualisieren zu sichern.
    • Des Weiteren möchten wir darauf hinweisen, dass einige Funktionen nach dem Update nur noch eingeschränkt bzw. nicht mehr zur Verfügung stehen. Hierzu zählen:

    -Kamera Funktion Bild-in-Bild
    -Smart Features
    -Verschlüsselungs-App von Fingerprint
    -Stopp-Alarm-Funktion
    -Zeitgesteuerte Ein- / Ausschaltfunktion
    -Verwendung der SD-Karte zur Erweiterung des internen Speichers


    Verfügbare Softwareaktualisierungen für Ihr Gerät können Sie jederzeit unter „Einstellungen - Über das Telefon - Systemaktualisierungen“ einsehen und abrufen.
    Zur Durchführung der Aktualisierung stellen Sie bitte sicher, dass Ihr Gerät über ausreichende Ladekapazität verfügt. Um das Datenvolumen nicht zu belasten, empfehlen wir die Durchführung der Aktualisierung über eine stabile WiFi Verbindung.
    Google ist eine eingetragene Marke der Google LLC. Oreo ist eine eingetragene Handelsmarke der Mondelez International, Inc. Group.

    Download
  • Software Update von SD-Karte für das Gigaset GS270 von Version S127 auf S131

    Bei bestimmten Speicherkonstellationen kann es beim Gigaset GS270 in Einzelfällen vorkommen, dass ein normales Update über den Onlineserver nicht möglich ist. In diesen Fällen ist ein manuelles Update von SD-Karte durchzuführen.

    Dieser Download enthält eine Anleitung, die beschreibt, wie Sie die Software auf Ihrem Gigaset GS270 von Version S127 auf S131 mit einer microSD-Karte manuell aktualisieren können und die Software-Image-Datei 'B07_B11_FOTA.zip'.

    Ihre Persönlichen Daten werden nicht gelöscht. Wir empfehlen Ihnen dennoch, wichtige Daten vor dem Aktualisieren zu sichern.

    Voraussetzungen für das Update der SD-Karte:

    • Die aktuelle Softwareversion des Gigaset GS270 muss GIG_GS270_S127 sein.
    • Sie benötigen eine microSD-Karte mit 1 GB oder mehr Kapazität (siehe Einstellungen/Speicher/SD-Karte).
    • Die Akkukapazität sollte bei der Aktualisierung eines Telefons mindestens 50 Prozent betragen.



    Download
  • Gigaset GS270/GS270 plus - Systemaktualisierung Android™ 7 Version S120 05/2018

    Verbesserungen und Änderungen mit Version S120:

    • Neues Google Sicherheitsupdate Stand: April 2018
    • Audio-Animation beim Starten und Herunterfahren entfernt
    • Diverse Fehlerbehebungen
    • System- und Funktionsverbesserungen
    Download
  • Gigaset GS270/GS270 plus - Systemaktualisierung Android™ 7 Version S118 01/2018

    Verbesserungen und Änderungen mit Version S118:

    • Neues Google Sicherheitsupdate Stand: Dezember 2017
    • Erhöhte WLAN-Sicherheitsstufe
    • System Fehlerkorrekturen
    • System- und Funktionsverbesserungen
    Download
  • Gigaset GS270/GS270 plus - Systemaktualisierung Android™ 7 Version S115 11/2017

    Verbesserungen und Änderungen mit Version S115:

    • Neues Google Sicherheitsupdate Stand: Oktober 2017
    • Erhöhte Bluetooth-Sicherheitsstufe
    • System Fehlerkorrekturen
    • System- und Funktionsverbesserungen
    Download
  • Gigaset GS270/GS270 plus - Systemaktualisierung Android™ 7 Version S114 09/2017

    Verbesserungen und Änderungen mit Version S114:

    • Neues Google Sicherheitsupdate Stand: August 2017
    • Verbesserte Bildqualität der Kamera
    • System Fehlerkorrekturen
    • System- und Funktionsverbesserungen
    Download
Software

Nicht fündig geworden?

Kontaktieren Sie den Gigaset Kundenservice für persönliche Hilfestellung.