Reset base

You can reset the base Gigaset SL910/SL910A in the following ways:

There are two different kind of SL910/SL910A bases on market. Please choose the correct one!

New version (without LAN and LED)	Old version (with LAN and blue LED)
Unplug the power supply from the base. Press and hold the key on the base station. Plug in the power supply again. Wait 6 seconds while still holding the key.	Unplug the power supply from the base. Press and hold the key on the base station. Plug in the power supply again. Keep the key pressed until it starts flashing. Leave the key as it starts flashing. Unplug and plug the power supply after this procedure.

Please note:
If you have followed this procedure correctly, all handsets are deregistered and every setting from the base is reseted to the default setting. The system code will be reset to 0000.
(SL910A only: All messages and settings on answering machine will reset to default.)