Service für Gigaset QuickSync - Mac Version

Willkommen beim Kundenservice für Ihr Gigaset QuickSync - Mac Version. Auf dieser Seite finden Sie Antworten zu häufig gestellten Fragen. Sowohl Bedienungsanleitungen wie auch Soft- und Firmware stehen zum herunterladen bereit. Ebenfalls finden Sie hier Videotutorials, die Ihnen bei der Einrichtung helfen. Wenn Ihr Produkt einen Defekt aufweist, können Sie Ihr Gigaset QuickSync - Mac Version zur Reparatur anmelden. Außerdem finden Sie hier ubehör für Ihr Gigaset QuickSync - Mac Version. Sollten Sie nach Produkten für Ihr Gigaset QuickSync - Mac Version suchen, finden Sie Informationen dazu in unserer Kompatibilitätsdatenbank. Hier finden Sie auch Hilfestellung zum Registrieren Ihres Gigaset QuickSync - Mac Version mit anderen Geräten.

Suche

Antworten auf häufig gestellte Fragen

Sie haben Fragen zu Ihrem Gigaset Produkt? Hier erhalten Sie Antworten.

Top 10 FAQs

Is also a Gigaset Quick Sync version for MacOS available and where can I download it?

Yes, with the Gigaset QuickSync software you can easily synchronize your contacts on your Macintosh with your Gigaset. You can download the newest version from the QuickSync download site.
Which Gigasets are supported by the Gigaset QuickSync for MacOS?
Gigaset QuickSync can only be used with the following Gigasets:
- Gigaset CL660HX
- Gigaset SL56
- Gigaset SL37H
- Gigaset S68H
- Gigaset SL78H
- Gigaset S79H
- Gigaset S800H
- Gigaset S810H
- Gigaset S820H
- Gigaset S850H
- Gigaset S850HX
- Gigaset SL350
- Gigaset SL360HS
- Gigaset SL400H
- Gigaset SL450H
- Gigaset SL450HX
- Gigaset SL910H
- Gigaset DL500A
- Gigaset DX600A ISDN
- Gigaset DX800A all in one
- Gigaset S510H PRO
- Gigaset S650H PRO
- Gigaset SL610H PRO
- Gigaset SL750H PRO
- Gigaset DE700IP PRO
- Gigaset DE900IP PRO
- Gigaset DE310IP PRO
- Gigaset DE410IP PRO
Only handsets featuring western or central European, Cyrillic, Greek or Turkish character sets are supported.

Please note:

The character set used on your handset must correspond with the system language settings on your Mac.

The handset software cannot be updated with firmware.
What are the system requirements of Gigaset QuickSync for MacOS?
- Apple Macintosh PC or Notebook with Mac OS 10.7 operating system or higher
- Supported Gigaset phone
- Interface to connect Gigaset to the Mac:
- USB cable (e.g. SL78H, S79H, SL400H),

- Bluetooth (Bluetooth-compatible handsets, like SL78H) or

- LAN connection (e.g. DL500A, DX600A ISDN, DX800A)
I get the message that the firmware of the Gigaset handset is too old. How can I update the phone?

With the Gigaset SL910, the firmware can be updated on the Mac. To do so, the phone must be connected via a USB cable, and the option "Automatically check for firmware updates" must be activated under "QuickSync / Settings" in the Mac menu bar. Gigaset QuickSync then automatically checks for new firmware versions over the Internet, and offers them for download and a firmware update. Follow the program instructions to install the firmware update.

A firmware update of other Gigaset handsets is currently only possible with the Gigaset QuickSync for Windows operating systems. You can download the latest Gigaset QuickSync for Windows from the Gigaset Website:
> Download Gigaset QuickSync
After installing the QuickSync on a PC with a supported Windows operating system (Microsoft ® Windows ® XP, Windows ® Vista (32bit and 64bit) and Windows 7 ® (32bit and 64bit)) you can update the firmware of the handset.
Please note that your handset must be connected via USB cable to the PC. A firmware update via Bluetooth connection is not possible.
Why I am unable to connect a phone using the installed Gigaset QuickSync wizard ?
using USB connection:

Check that the USB cable is connected correctly and try again.

using Bluetooth connection:

Make sure that Bluetooth is activated on the handset and the Mac.

If the problem still occur, delete the old Bluetooth connection and create a new one in manual mode:
- Open System Preferences > Bluetooth and delete the handset from the list there
- Deactivate Bluetooth on the handset and disable the handset
- Take the battery out of the handset and wait for a few seconds. Put the battery back in the handset
- Close all programs on the Mac
- Activate Bluetooth on the Mac and the handset
- Open System Preferences > Bluetooth and add your handset manually. Click on "Configure Bluetooth device" to start the Apple Bluetooth wizard. Choose "All devices" from the device type menu and then select your handset from the list of all found devices. Follow the wizard's instructions
- Important: The handset will now ask you for the Bluetooth PIN. Enter the password displayed in the Bluetooth wizard. The question "Save to list of known devices?" should appear — press "Yes" to confirm
- Restart Gigaset QuickSync
- Click on the [+] symbol in the list of all known handsets. All existing handsets are listed
- Select your handset and click "Next" to connect
How can I dial phone numbers from the contact data on the Mac?
- Click on the contact in the contact list
- Click on the telephone number in the contact data and select the "Dial number" menu option
The Gigaset establishes a connection with the selected phone number.
What can I do, if the device communication between the Mac and the handset is (constantly) aborting?
Place the handset in idle status (press and hold the end call key) and restart the process.

If the problem still occur, please perform the followig steps:
- Switch off your handset and restart the Mac
- Switch your handset back on
- Start Gigaset QuickSync and reconnect the handset
Why Contacts are duplicated during the synchronization process?
This can occur if the data synchronization direction is changed with every synchronization or if a communication error occurred when connecting to the handset.
- Deactivate the Sync Manager prior to making any change to the data synchronization direction and then restart the program
The handset is connected via bluetooth and appears in the list of known handsets, but is marked as being unavailable (red dot). What can I do?
using USB connection:

Check that the USB cable is connected correctly and try again.

using Bluetooth connection:

Make sure that Bluetooth is activated on the handset and the Mac.

If the problem still occur, delete the old Bluetooth connection and create a new one in manual mode:
- Open System Preferences > Bluetooth and delete the handset from the list there
- Deactivate Bluetooth on the handset and disable the handset
- Take the battery out of the handset and wait for a few seconds. Put the battery back in the handset
- Close all programs on the Mac
- Activate Bluetooth on the Mac and the handset
- Open System Preferences > Bluetooth and add your handset manually. Click on "Configure Bluetooth device" to start the Apple Bluetooth wizard. Choose "All devices" from the device type menu and then select your handset from the list of all found devices. Follow the wizard's instructions
- Important: The handset will now ask you for the Bluetooth PIN. Enter the password displayed in the Bluetooth wizard. The question "Save to list of known devices?" should appear — press "Yes" to confirm
- Restart Gigaset QuickSync
- Click on the [+] symbol in the list of all known handsets. All existing handsets are listed
- Select your handset and click "Next" to connect
How can I uninstall the Gigaset QuickSync?

To uninstall Gigaset QuickSync, please open the "Programs" folder.
Here, you

will find the "QuickSync" folder. Move this folder to the Trash and empty the

Trash.
Gigaset QuickSync has now been deleted from your Mac.

alle FAQ nach Themen

C
- Connecting the Gigaset
  - How can I change the device name in Gigaset QuickSync?
    1. Please establish the connection between Gigaset QuickSync and the Gigaset device.
    2. Click on the device name below the product picture of the Gigaset.
    3. Now enter the new device name
  - What can I do, if the device communication between the Mac and the handset is (constantly) aborting?
    Place the handset in idle status (press and hold the end call key) and restart the process.
    
    If the problem still occur, please perform the followig steps:
    - Switch off your handset and restart the Mac
    - Switch your handset back on
    - Start Gigaset QuickSync and reconnect the handset
  - Why I am unable to connect a phone using the installed Gigaset QuickSync wizard ?
    using USB connection:
    
    Check that the USB cable is connected correctly and try again.
    
    using Bluetooth connection:
    
    Make sure that Bluetooth is activated on the handset and the Mac.
    
    If the problem still occur, delete the old Bluetooth connection and create a new one in manual mode:
    - Open System Preferences > Bluetooth and delete the handset from the list there
    - Deactivate Bluetooth on the handset and disable the handset
    - Take the battery out of the handset and wait for a few seconds. Put the battery back in the handset
    - Close all programs on the Mac
    - Activate Bluetooth on the Mac and the handset
    - Open System Preferences > Bluetooth and add your handset manually. Click on "Configure Bluetooth device" to start the Apple Bluetooth wizard. Choose "All devices" from the device type menu and then select your handset from the list of all found devices. Follow the wizard's instructions
    - Important: The handset will now ask you for the Bluetooth PIN. Enter the password displayed in the Bluetooth wizard. The question "Save to list of known devices?" should appear — press "Yes" to confirm
    - Restart Gigaset QuickSync
    - Click on the [+] symbol in the list of all known handsets. All existing handsets are listed
    - Select your handset and click "Next" to connect
- Compatibility / System requirements
  - What are the system requirements of Gigaset QuickSync for MacOS?
    - Apple Macintosh PC or Notebook with Mac OS 10.7 operating system or higher
    - Supported Gigaset phone
    - Interface to connect Gigaset to the Mac:
    - USB cable (e.g. SL78H, S79H, SL400H),
    
    - Bluetooth (Bluetooth-compatible handsets, like SL78H) or
    
    - LAN connection (e.g. DL500A, DX600A ISDN, DX800A)
  - Which Gigasets are supported by the Gigaset QuickSync for MacOS?
    Gigaset QuickSync can only be used with the following Gigasets:
    - Gigaset CL660HX
    - Gigaset SL56
    - Gigaset SL37H
    - Gigaset S68H
    - Gigaset SL78H
    - Gigaset S79H
    - Gigaset S800H
    - Gigaset S810H
    - Gigaset S820H
    - Gigaset S850H
    - Gigaset S850HX
    - Gigaset SL350
    - Gigaset SL360HS
    - Gigaset SL400H
    - Gigaset SL450H
    - Gigaset SL450HX
    - Gigaset SL910H
    - Gigaset DL500A
    - Gigaset DX600A ISDN
    - Gigaset DX800A all in one
    - Gigaset S510H PRO
    - Gigaset S650H PRO
    - Gigaset SL610H PRO
    - Gigaset SL750H PRO
    - Gigaset DE700IP PRO
    - Gigaset DE900IP PRO
    - Gigaset DE310IP PRO
    - Gigaset DE410IP PRO
    Only handsets featuring western or central European, Cyrillic, Greek or Turkish character sets are supported.
    
    Please note:
    
    The character set used on your handset must correspond with the system language settings on your Mac.
    
    The handset software cannot be updated with firmware.
D
- Dialling a phone number
  - How can I dial phone numbers from other applications (e.g. Mac addressbook, Safari)?
    - Right-click on the phone number
    - Select the menu option "Services" and then "QuickSync: dial with ..."
    The Gigaset establishes a connection with the selected phone number.
  - How can I dial phone numbers from the contact data on the Mac?
    - Click on the contact in the contact list
    - Click on the telephone number in the contact data and select the "Dial number" menu option
    The Gigaset establishes a connection with the selected phone number.
F
- Firmware / Update
  - I get the message that the firmware of the Gigaset handset is too old. How can I update the phone?
    
    With the Gigaset SL910, the firmware can be updated on the Mac. To do so, the phone must be connected via a USB cable, and the option "Automatically check for firmware updates" must be activated under "QuickSync / Settings" in the Mac menu bar. Gigaset QuickSync then automatically checks for new firmware versions over the Internet, and offers them for download and a firmware update. Follow the program instructions to install the firmware update.
    
    A firmware update of other Gigaset handsets is currently only possible with the Gigaset QuickSync for Windows operating systems. You can download the latest Gigaset QuickSync for Windows from the Gigaset Website:
    > Download Gigaset QuickSync
    After installing the QuickSync on a PC with a supported Windows operating system (Microsoft ® Windows ® XP, Windows ® Vista (32bit and 64bit) and Windows 7 ® (32bit and 64bit)) you can update the firmware of the handset.
    Please note that your handset must be connected via USB cable to the PC. A firmware update via Bluetooth connection is not possible.
I
- Installation / Configuration
  - How can I uninstall the Gigaset QuickSync?
    
    To uninstall Gigaset QuickSync, please open the "Programs" folder.
    Here, you
    
    will find the "QuickSync" folder. Move this folder to the Trash and empty the
    
    Trash.
    Gigaset QuickSync has now been deleted from your Mac.
  - Is also a Gigaset Quick Sync version for MacOS available and where can I download it?
    
    Yes, with the Gigaset QuickSync software you can easily synchronize your contacts on your Macintosh with your Gigaset. You can download the newest version from the QuickSync download site.
  - There are plugins still on the PC after the de-installation of QuickSync. How can I remove these?
    
    Please open the folder MacintoshHD -> User -> USERNAME -> Library -> Services and delete the file „QuickSyncServices.serice“. Afterwards please empty also the Trash of your Mac.
M
- Managing / synchronizing contacts
  - How can I create a backup of the Gigaset contacts?
    You should create a backup copy of your Gigaset contacts on the Mac to prevent the loss of data. To save all contacts in a VCF address file, proceed as follows:
    - Create a backup folder on your Mac
    - Click on the "Contacts" tab to open the contact list
    - Click the "Refresh from phone" icon. Gigaset QuickSync imports all of the existing contacts from the handset and displays them in a list
    - Select all entries in the list (key combination
    - Drag the contact data to the backup folder
  - How can I remove duplicate contacts from the handset?
    If you have saved all current contacts onto the Mac, you can perform the following steps:
    - Start Gigaset QuickSync
    - Switch to Setup Sync and deactivate the Sync Manager
    - Switch to the contact list and click "Refresh from phone"
    - Select and delete all of the contacts (drag them to the Mac Trash)
    - Click "Update with phone" to delete all contacts on the handset
    - Close and restart Gigaset QuickSync
    - Switch to Setup Sync and reactivate the Sync Manager. Configure the data synchronization direction as Mac to handset
    - Synchronize the data
  - The handset is connected via bluetooth and appears in the list of known handsets, but is marked as being unavailable (red dot). What can I do?
    using USB connection:
    
    Check that the USB cable is connected correctly and try again.
    
    using Bluetooth connection:
    
    Make sure that Bluetooth is activated on the handset and the Mac.
    
    If the problem still occur, delete the old Bluetooth connection and create a new one in manual mode:
    - Open System Preferences > Bluetooth and delete the handset from the list there
    - Deactivate Bluetooth on the handset and disable the handset
    - Take the battery out of the handset and wait for a few seconds. Put the battery back in the handset
    - Close all programs on the Mac
    - Activate Bluetooth on the Mac and the handset
    - Open System Preferences > Bluetooth and add your handset manually. Click on "Configure Bluetooth device" to start the Apple Bluetooth wizard. Choose "All devices" from the device type menu and then select your handset from the list of all found devices. Follow the wizard's instructions
    - Important: The handset will now ask you for the Bluetooth PIN. Enter the password displayed in the Bluetooth wizard. The question "Save to list of known devices?" should appear — press "Yes" to confirm
    - Restart Gigaset QuickSync
    - Click on the [+] symbol in the list of all known handsets. All existing handsets are listed
    - Select your handset and click "Next" to connect
  - Why Contacts are duplicated during the synchronization process?
    This can occur if the data synchronization direction is changed with every synchronization or if a communication error occurred when connecting to the handset.
    - Deactivate the Sync Manager prior to making any change to the data synchronization direction and then restart the program
  - Why I cannot synchronize contacts with Gigaset QuickSync for MacOS?
    Contacts in the Mac Address Book that are not stored locally on the Mac, but are active in the Apple iCloud, cannot be synchronized. In this case, transfer the contacts to the phone manually or disable iCloud temporary in order to sync with the Gigaset QuickSync.
    Disable iCloud on the Mac:
    - Open System Preferences
    - Go to the iCloud option
    - Turn off Contacts sync
    If a message of "keep copy of local contacts" appears, then click "keep contacts". Now the contacts and groups will be available to sync with Sync Services and the Gigaset QuickSync software.
    Transferring contacts to the phone:
    - Click on the "Address Book" icon to open the Mac Address Book
    - Drag and drop the new contacts from the Mac Address Book to the contact list, or copy and paste the contacts to the contact list. The added contacts are highlighted in green
    - Click on the "Update with phone" icon to transfer the new contacts to the phone.
T
- Troubleshooting
  - I get the message that the firmware of the Gigaset handset is too old. How can I update the phone?
    
    With the Gigaset SL910, the firmware can be updated on the Mac. To do so, the phone must be connected via a USB cable, and the option "Automatically check for firmware updates" must be activated under "QuickSync / Settings" in the Mac menu bar. Gigaset QuickSync then automatically checks for new firmware versions over the Internet, and offers them for download and a firmware update. Follow the program instructions to install the firmware update.
    
    A firmware update of other Gigaset handsets is currently only possible with the Gigaset QuickSync for Windows operating systems. You can download the latest Gigaset QuickSync for Windows from the Gigaset Website:
    > Download Gigaset QuickSync
    After installing the QuickSync on a PC with a supported Windows operating system (Microsoft ® Windows ® XP, Windows ® Vista (32bit and 64bit) and Windows 7 ® (32bit and 64bit)) you can update the firmware of the handset.
    Please note that your handset must be connected via USB cable to the PC. A firmware update via Bluetooth connection is not possible.
  - The handset is connected via bluetooth and appears in the list of known handsets, but is marked as being unavailable (red dot). What can I do?
    using USB connection:
    
    Check that the USB cable is connected correctly and try again.
    
    using Bluetooth connection:
    
    Make sure that Bluetooth is activated on the handset and the Mac.
    
    If the problem still occur, delete the old Bluetooth connection and create a new one in manual mode:
    - Open System Preferences > Bluetooth and delete the handset from the list there
    - Deactivate Bluetooth on the handset and disable the handset
    - Take the battery out of the handset and wait for a few seconds. Put the battery back in the handset
    - Close all programs on the Mac
    - Activate Bluetooth on the Mac and the handset
    - Open System Preferences > Bluetooth and add your handset manually. Click on "Configure Bluetooth device" to start the Apple Bluetooth wizard. Choose "All devices" from the device type menu and then select your handset from the list of all found devices. Follow the wizard's instructions
    - Important: The handset will now ask you for the Bluetooth PIN. Enter the password displayed in the Bluetooth wizard. The question "Save to list of known devices?" should appear — press "Yes" to confirm
    - Restart Gigaset QuickSync
    - Click on the [+] symbol in the list of all known handsets. All existing handsets are listed
    - Select your handset and click "Next" to connect
  - There are plugins still on the PC after the de-installation of QuickSync. How can I remove these?
    
    Please open the folder MacintoshHD -> User -> USERNAME -> Library -> Services and delete the file „QuickSyncServices.serice“. Afterwards please empty also the Trash of your Mac.
  - What can I do, if the device communication between the Mac and the handset is (constantly) aborting?
    Place the handset in idle status (press and hold the end call key) and restart the process.
    
    If the problem still occur, please perform the followig steps:
    - Switch off your handset and restart the Mac
    - Switch your handset back on
    - Start Gigaset QuickSync and reconnect the handset
  - Why Contacts are duplicated during the synchronization process?
    This can occur if the data synchronization direction is changed with every synchronization or if a communication error occurred when connecting to the handset.
    - Deactivate the Sync Manager prior to making any change to the data synchronization direction and then restart the program
  - Why I always receive an error message when you I try to access handset data via bluetooth connection?
    1. The handset is not in idle status:
    - Place the handset in idle status (press and hold the end call key) and restart the process
    2. The Bluetooth connection is interrupted:
    - Close Gigaset QuickSync and all other applications that have access to the handset
    - Restart Gigaset QuickSync
    - Place the handset in idle status (press and hold the end call key), connect the handset and restart the process
    If you now receive the same error, please perform all of the following steps:
    
    1. Make sure that Bluetooth is activated on the handset and the Mac
    2. Delete the old Bluetooth connection and create a new one in manual mode:
    - Open System Preferences > Bluetooth and delete the handset from the list there
    - Deactivate Bluetooth on the handset and disable the handset
    - Take the battery out of the handset and wait for a few seconds. Put the battery back in the handset
    - Close all programs on the Mac
    - Activate Bluetooth on the Mac and the handset
    - Open System Preferences > Bluetooth and add your handset manually. Click on "Configure Bluetooth device" to start the Apple Bluetooth wizard. Choose "All devices" from the device type menu and then select your handset from the list of all found devices. Follow the wizard's instructions
    - Important: The handset will now ask you for the Bluetooth PIN. Enter the password displayed in the Bluetooth wizard. The question "Save to list of known devices?" should appear — press "Yes" to confirm
    - Restart Gigaset QuickSync
    - Click on the [+] symbol in the list of all known handsets. All existing handsets are listed
    - Select your handset and click "Next" to connect
  - Why I am unable to connect a phone using the installed Gigaset QuickSync wizard ?
    using USB connection:
    
    Check that the USB cable is connected correctly and try again.
    
    using Bluetooth connection:
    
    Make sure that Bluetooth is activated on the handset and the Mac.
    
    If the problem still occur, delete the old Bluetooth connection and create a new one in manual mode:
    - Open System Preferences > Bluetooth and delete the handset from the list there
    - Deactivate Bluetooth on the handset and disable the handset
    - Take the battery out of the handset and wait for a few seconds. Put the battery back in the handset
    - Close all programs on the Mac
    - Activate Bluetooth on the Mac and the handset
    - Open System Preferences > Bluetooth and add your handset manually. Click on "Configure Bluetooth device" to start the Apple Bluetooth wizard. Choose "All devices" from the device type menu and then select your handset from the list of all found devices. Follow the wizard's instructions
    - Important: The handset will now ask you for the Bluetooth PIN. Enter the password displayed in the Bluetooth wizard. The question "Save to list of known devices?" should appear — press "Yes" to confirm
    - Restart Gigaset QuickSync
    - Click on the [+] symbol in the list of all known handsets. All existing handsets are listed
    - Select your handset and click "Next" to connect
  - Why I cannot synchronize contacts with Gigaset QuickSync for MacOS?
    Contacts in the Mac Address Book that are not stored locally on the Mac, but are active in the Apple iCloud, cannot be synchronized. In this case, transfer the contacts to the phone manually or disable iCloud temporary in order to sync with the Gigaset QuickSync.
    Disable iCloud on the Mac:
    - Open System Preferences
    - Go to the iCloud option
    - Turn off Contacts sync
    If a message of "keep copy of local contacts" appears, then click "keep contacts". Now the contacts and groups will be available to sync with Sync Services and the Gigaset QuickSync software.
    Transferring contacts to the phone:
    - Click on the "Address Book" icon to open the Mac Address Book
    - Drag and drop the new contacts from the Mac Address Book to the contact list, or copy and paste the contacts to the contact list. The added contacts are highlighted in green
    - Click on the "Update with phone" icon to transfer the new contacts to the phone.
- Transferring ringtones / pictures

Downloads

Hier erhalten Sie Bedienungsanleitungen und Software-Updates.

Manuals

Firmware

Software

QuickSync Version 4.4.3 (Mac OS 10.9 - 12.3 Monterey incl. M1 Macs)
Gigaset QuickSync for Mac
Mit dieser Software lassen sich bequem Ihre Adressdaten von den Mac OS Kontakten mit dem Gigaset Mobilteil über Bluetooth^®, Datenkabel oder Netzwerk (LAN) synchronisieren (je nach unterstütztem Gerätetyp stehen ein oder mehrere Verbindungsmöglichkeiten zur Verfügung).
Generelle Informationen

Unterstützte Betriebssystemversionen:
Mac OS 10.9 - 12.3 Monterey inkl. M1 Macs
Leistungsmerkmale der Gigaset QuickSync Software für Mac:
Synchronisation zwischen Ihrem Mac Adressbuch (inkl. iCloud) und unterstützten Gigaset Geräten
Download von Klingeltönen, Screensavern und Picture Clips
Unterstützt alle Quicktime Musikformate - Automatische Konvertierung in G.722 Format während des Downloads
Klingelton-Editor: Wählen Sie, wie viele Sekunden des Titels auf das Mobilteil übertragen werden sollen
Wählen von Telefonnummern über ein verbundenes Gigaset Telefon:
Wählen sie eine Telefonnummer in einem Programm (z.B. Safari) aus und starten Sie den Wählvorgang über das Kontextmenü
Das ausgewählte Telefon wählt die ausgewählte Nummer in Freisprechbetrieb
(Das Kontextmenü muss in den Systemeinstellungen->Tastatur->Kurzbefehle->Dienste aktiviert sein)
Unterstützung von mehreren Mobilteilen mit jeweils eigenen Namen
Release Notes (Juni 2022)

Version 4.4.3
Unterstützung neuer Handsets
Weitere Anpassungen an die aktuellen macOS Systeme
Generelle Fehlerbehebungen und Stabilitätsverbesserungen
Bitte beachten Sie:
Bitte stellen sie die Landes- und Ortsvorwahl in der QuickSync Software und dem Gigaset Telefon korrekt ein. Eine falsche Einstellung kann zu Fehlern bei der Synchronisation führen. Zur Sicherheit sollten Sie vor der ersten Synchronisation von ihrem Mac-Adressbuch eine Sicherungskopie zu erstellen. Mehr dazu in der QuickSync Hilfe.
Download
QuickSync Version 4.2.5 (Mac OS 10.9 - 10.15 Catalina)
Gigaset QuickSync for Mac

Mit dieser Software lassen sich bequem Ihre Adressdaten von den Mac OS Kontakten mit dem Gigaset Mobilteil über Bluetooth^®, Datenkabel oder Netzwerk (LAN) synchronisieren (je nach unterstütztem Gerätetyp stehen ein oder mehrere Verbindungsmöglichkeiten zur Verfügung).

Generelle Informationen
Unterstützte Betriebssystemversionen:
Mac OS X 10.15 Catalina, Mac OS X 10.13 High Sierra, 10.12 Sierra, 10.11 El Capitan, 10.10 Yosemite, 10.9 Mavericks

Leistungsmerkmale der Gigaset QuickSync Software für Mac:
Synchronisation zwischen Ihrem Mac Adressbuch (inkl. iCloud) und unterstützten Gigaset Geräten
Download von Klingeltönen, Screensavern und Picture Clips
Unterstützt alle Quicktime Musikformate - Automatische Konvertierung in G.722 Format während des Downloads
Klingelton-Editor: Wählen Sie, wie viele Sekunden des Titels auf das Mobilteil übertragen werden sollen
Automatische Bildübertragung aus dem Mac Adressbuch (nur für SL910 und S820)

Wählen von Telefonnummern über ein verbundenes Gigaset Telefon:
Wählen sie eine Telefonnummer in einem Programm (z.B. Safari) aus und starten Sie den Wählvorgang über das Kontextmenü
Das ausgewählte Telefon wählt die ausgewählte Nummer in Freisprechbetrieb
(Das Kontextmenü muss in den Systemeinstellungen->Tastatur->Kurzbefehle->Dienste aktiviert sein)
Unterstützung von mehreren Mobilteilen mit jeweils eigenen Namen
Release Notes (Juni 2020)
Version 4.2.5
Mac OS 10.15 Catalina support (64 bit System)
Generelle Fehlerbehebungen und Stabilitätsverbesserungen
Bitte beachten Sie:
Bitte stellen sie die Landes- und Ortsvorwahl in der QuickSync Software und dem Gigaset Telefon korrekt ein. Eine falsche Einstellung kann zu Fehlern bei der Synchronisation führen. Zur Sicherheit sollten Sie vor der ersten Synchronisation von ihrem Mac-Adressbuch eine Sicherungskopie zu erstellen. Mehr dazu in der QuickSync Hilfe.
Download
QuickSync Version 4.0 (Mac OS 10.9 - 10.13 High Sierra)
Gigaset QuickSync für Mac
Mit dieser Software lassen sich bequem Ihre Adressdaten von den Mac OS Kontakten mit dem Gigaset Mobilteil über Bluetooth^®, Datenkabel oder Netzwerk (LAN) synchronisieren (je nach unterstütztem Gerätetyp stehen ein oder mehrere Verbindungsmöglichkeiten zur Verfügung).

Generelle Informationen

Unterstützte Betriebssystemversionen:
Mac OS X 10.13 High Sierra, 10.12 Sierra, 10.11 El Capitan, 10.10 Yosemite, 10.9 Mavericks

Leistungsmerkmale der Gigaset QuickSync Software für Mac:
Synchronisation zwischen Ihrem Mac Adressbuch (inkl. iCloud) und unterstützten Gigaset Geräten
Download von Klingeltönen, Screensavern und Picture Clips
Unterstützt alle Quicktime Musikformate - Automatische Konvertierung in G.722 Format während des Downloads
Klingelton-Editor: Wählen Sie, wie viele Sekunden des Titels auf das Mobilteil übertragen werden sollen
Automatische Bildübertragung aus dem Mac Adressbuch (nur für SL910 und S820)

Wählen von Telefonnummern über ein verbundenes Gigaset Telefon:
Wählen sie eine Telefonnummer in einem Programm (z.B. Safari) aus und starten Sie den Wählvorgang über das Kontextmenü
Das ausgewählte Telefon wählt die ausgewählte Nummer in Freisprechbetrieb
(Das Kontextmenü muss in den Systemeinstellungen->Tastatur->Kurzbefehle->Dienste aktiviert sein)
Unterstützung von mehreren Mobilteilen mit jeweils eigenen Namen

Gigaset QuickSync ist kompatibel mit den Gigaset Mobilteilen:
Gigaset CL660HX, SL785, SL780, SL78H, SL565, SL560, SL56, SL400, SL400A, SL400H, SL375, SL370, SL37H, S810, S810A, S810H, S800, S800A, S800H, S820, S820A, S820H, S850H, S850HX, SL350, SL360HS, SL450H, SL450HX, SL910, SL910A, SL910H, S790, S795, S79H, SX790 ISDN, SX795 ISDN, S685, S680, SX685 isdn, SX680 isdn, S685 IP, S68H, S510H PRO, S650H PRO, SL610H PRO und SL750H PRO.

Gigaset QuickSync ist kompatibel mit den Gigaset Tischtelefonen:
Gigaset DL500A, DX600A ISDN, DX800A all in one, DE310, DE410, DE700, DE900 IP PRO

Release Notes (April 2018)

Version 4.0
NEU: Mac OS 10.13 High Sierra support (64 bit System)
Download
QuickSync Version 3.6 (Mac OS 10.7 - 10.12 Sierra)
Gigaset QuickSync für Mac
Mit dieser Software lassen sich bequem Ihre Adressdaten von den Mac OS Kontakten mit dem Gigaset Mobilteil über Bluetooth^®, Datenkabel oder Netzwerk (LAN) synchronisieren (je nach unterstütztem Gerätetyp stehen ein oder mehrere Verbindungsmöglichkeiten zur Verfügung).
Generelle Informationen

Unterstützte Betriebssystemversionen:
Mac OS X 10.11 El Capitan, 10.10 Yosemite, 10.9, 10.8, 10.7

Leistungsmerkmale der Gigaset QuickSync Software für Mac:
Synchronisation zwischen Ihrem Mac Adressbuch (inkl. iCloud) und unterstützten Gigaset Geräten
Download von Klingeltönen, Screensavern und Picture Clips
Unterstützt alle Quicktime Musikformate - Automatische Konvertierung in G.722 Format während des Downloads
Klingelton-Editor: Wählen Sie, wie viele Sekunden des Titels auf das Mobilteil übertragen werden sollen
Automatische Bildübertragung aus dem Mac Adressbuch (nur für SL910 und S820)

Wählen von Telefonnummern über ein verbundenes Gigaset Telefon:
Wählen sie eine Telefonnummer in einem Programm (z.B. Safari) aus und starten Sie den Wählvorgang über das Kontextmenü
Das ausgewählte Telefon wählt die ausgewählte Nummer in Freisprechbetrieb
(Das Kontextmenü muss in den Systemeinstellungen->Tastatur->Kurzbefehle->Dienste aktiviert sein)
Unterstützung von mehreren Mobilteilen mit jeweils eigenen Namen

Gigaset QuickSync ist kompatibel mit den Gigaset Mobilteilen:
Gigaset CL660HX, SL785, SL780, SL78H, SL565, SL560, SL56, SL400, SL400A, SL400H, SL375, SL370, SL37H, S810, S810A, S810H, S800, S800A, S800H, S820, S820A, S820H, S850H, S850HX, SL350, SL360HS, SL450H, SL450HX, SL910, SL910A, SL910H, S790, S795, S79H, SX790 ISDN, SX795 ISDN, S685, S680, SX685 isdn, SX680 isdn, S685 IP, S68H, S510H PRO, S650H PRO, SL610H PRO und SL750H PRO.

Gigaset QuickSync ist kompatibel mit den Gigaset Tischtelefonen:
Gigaset DL500A, DX600A ISDN, DX800A all in one, DE310, DE410, DE700, DE900 IP PRO

Release Notes (November 2016)

Version 3.6
Mac OS 10.12 Sierra Support
Download
QuickSync Version 3.0.2 (Mac OS 10.5 - 10.9)
Gigaset QuickSync für Mac
Mit dieser Software lassen sich bequem Ihre Adressdaten von den Mac OS Kontakten mit dem Gigaset Mobilteil über Bluetooth^®, Datenkabel oder Netzwerk (LAN) synchronisieren (je nach unterstütztem Gerätetyp stehen ein oder mehrere Verbindungsmöglichkeiten zur Verfügung).
Generelle Informationen

Unterstützte Betriebssystemversionen:
Mac OS 10.9, 10.8, 10.7, 10.6, 10.5

Leistungsmerkmale der Gigaset QuickSync Software für Mac:
Synchronisation zwischen Ihrem Mac Adressbuch (inkl. iCloud) und unterstützten Gigaset Geräten
Download von Klingeltönen, Screensavern und Picture Clips
Unterstützt alle Quicktime Musikformate - Automatische Konvertierung in G.722 Format während des Downloads
Klingelton-Editor: Wählen Sie, wie viele Sekunden des Titels auf das Mobilteil übertragen werden sollen
Automatische Bildübertragung aus dem Mac Adressbuch (nur für SL910 und S820)

Wählen von Telefonnummern über ein verbundenes Gigaset Telefon:
Wählen sie eine Telefonnummer in einem Programm (z.B. Safari) aus und starten Sie den Wählvorgang über das Kontextmenü
Das ausgewählte Telefon wählt die ausgewählte Nummer in Freisprechbetrieb
(Das Kontextmenü muss in den Systemeinstellungen->Tastatur->Kurzbefehle->Dienste aktiviert sein)
Unterstützung von mehreren Mobilteilen mit jeweils eigenen Namen

Gigaset QuickSync ist kompatibel mit den Gigaset Mobilteilen:
Gigaset SL785, SL780, SL78H, SL565, SL560, SL56, SL400, SL400A, SL400H, SL375, SL370, SL37H, S810, S810A, S810H, S800, S800A, S800H, S820, S820A, S820H, SL910, SL910A, SL910H, S790, S795, S79H, SX790 ISDN, SX795 ISDN, S685, S680, SX685 isdn, SX680 isdn, S685 IP, S68H

Gigaset QuickSync ist kompatibel mit den Gigaset Tischtelefonen:
Gigaset DL500A, DX600A ISDN, DX800A all in one, DE310, DE410, DE700, DE900 IP PRO
Download
Quick Sync - Privacy Policy_de

Download

Nicht fündig geworden?

Kontaktieren Sie den Gigaset Kundenservice für persönliche Hilfestellung.

Kontakt aufnehmen

Produktempfehlungen (2)

Service für Gigaset QuickSync - Mac Version

Suche

Antworten auf häufig gestellte Fragen

Top 10 FAQs

alle FAQ nach Themen

Downloads

Gigaset QuickSync for Mac

Generelle Informationen

Release Notes (Juni 2022)

Gigaset QuickSync for Mac

Mit dieser Software lassen sich bequem Ihre Adressdaten von den Mac OS Kontakten mit dem Gigaset Mobilteil über Bluetooth^®, Datenkabel oder Netzwerk (LAN) synchronisieren (je nach unterstütztem Gerätetyp stehen ein oder mehrere Verbindungsmöglichkeiten zur Verfügung).

Generelle Informationen

Release Notes (Juni 2020)

Gigaset QuickSync für Mac

Generelle Informationen

Release Notes (April 2018)

Gigaset QuickSync für Mac

Generelle Informationen

Release Notes (November 2016)

Gigaset QuickSync für Mac

Generelle Informationen

Nicht fündig geworden?

Zahlungsarten

Produktempfehlungen (2)

Service für Gigaset QuickSync - Mac Version

Suche

Antworten auf häufig gestellte Fragen

Top 10 FAQs

alle FAQ nach Themen

Downloads

Gigaset QuickSync for Mac

Generelle Informationen

Release Notes (Juni 2022)

Gigaset QuickSync for Mac

Mit dieser Software lassen sich bequem Ihre Adressdaten von den Mac OS Kontakten mit dem Gigaset Mobilteil über Bluetooth®, Datenkabel oder Netzwerk (LAN) synchronisieren (je nach unterstütztem Gerätetyp stehen ein oder mehrere Verbindungsmöglichkeiten zur Verfügung).

Generelle Informationen

Release Notes (Juni 2020)

Gigaset QuickSync für Mac

Generelle Informationen

Release Notes (April 2018)

Gigaset QuickSync für Mac

Generelle Informationen

Release Notes (November 2016)

Gigaset QuickSync für Mac

Generelle Informationen

Nicht fündig geworden?

Zahlungsarten

Mit dieser Software lassen sich bequem Ihre Adressdaten von den Mac OS Kontakten mit dem Gigaset Mobilteil über Bluetooth^®, Datenkabel oder Netzwerk (LAN) synchronisieren (je nach unterstütztem Gerätetyp stehen ein oder mehrere Verbindungsmöglichkeiten zur Verfügung).