Software

Be it drivers, device software, Gigaset QuickSync or others: here you will find every support download available for your product. (If you are looking for a manual, please go to "Downloads" > "Manuals").

Please choose a product.




Version 0.1.4

Gigaset SL400

Gigaset SL400H factory default sounds

Default ringtones

Gigaset SL400H - Firmware update 04/2011 (version 78.045.02)

How to update:

  1. Please start the software "Gigaset Quicksync" on your PC. You will find it on the internet at gigaset.com/hq/en/cms/PageQuickSync.html
  2. Please carry out the update of the Gigaset Quick Sync software if it is offered.
  3. Connect the handset directly to your PC via a mini USB cable. (Do not connect the USB cable via a USB HUB to your PC; failures may occur).
  4. Leave the batteries in the handset and switch the handset on. If necessary the device driver software of your handset will be installed automatically on your PC.
  5. Choose “Connect handset automatically” in the Gigaset Quicksync window.
  6. When a connection is set up, the message “SL400H connected (n) (nnnnnnnnnn)” appears. If a new handset firmware is available, a prompt automatically appears.
  7. The firmware will be installed on your handset in several cycles.
    Do not disconnect your handset until you see the message “Handset firmware has been updated successfully”.

 

Improvements and changes:

  • Direct call
    By pressing any key  the one number already stored is dialled.
  • Babyphone function with feedback:
    In addition to being able to hear the baby, it is now also possible to answer the baby.
  • Displaying CLIP type (redial list):
    An icon in front of the number/name in the CLIP display shows where a call was started: home, office, mobile.
  • Battery low tone in handset changed.
  • IP –feature support:
    Live ticker text can be enabled / disabled locally on handset

 

Descriptions for Firmware update:

  • Pictures and ringtones stored on the handset should also be stored on the PC; these are deleted during an emergency update!
  • When updating SW do not connect the handset via the USB hub; please connect handset directly to the PC.

 

Download this Information here:

QuickSync Software for Mac (version 2.1)

 

Added support for the following devices:

  • SL910H incl. firmware update
  • DE310
  • DE410
  • DE700
  • DE900
  • SL610 Pro


Support for MacOS 10.7 (also supported: 10.6 & 10.5)

AppleScript interface for dialing
Example:
tell application "QuickSyncServices.service"
dial "089 12345" with phone "SL78H"
end tell

Please check the following items:

  • Set the area and country codes in the QuickSync software and the Gigaset phone correctly. Wrong settings can lead to wrong synchronizations.
  • Please backup your Mac address book contacts before the first sync. (See QuickSync help)

Gigaset SL400, SL400H, SL400A, SL400 Duo - Firmware update 11/2011 (Version 80.053.01)

Improvements:

  • As of this version, update also possible with a MAC PC
  • Improvements for operation on multi-cell systems
  • CLIP display is supported for incoming calls for Alcatel PBXs


How to update the handset Gigaset SL400, SL400H, SL400A, SL400 Duo:

  1. Please start the software "Gigaset QuickSync" on your PC. You will find it on the internet at gigaset.com/hq/en/cms/PageQuickSync.html
  2. Please carry out the update of the Gigaset QuickSync software if it is offered.
  3. Connect the handset directly to your PC via a mini USB cable. (Do not connect the USB cable via a USB HUB to your PC; failures may occur).
  4. Leave the batteries in the handset and switch the handset on. If necessary the device driver software of your handset will be installed automatically on your PC.
  5. Establish a connection to the handset with the Gigaset QuickSync.
  6. If a new handset firmware is available, a prompt automatically appears.
  7. The firmware will be installed on your handset in several cycles.
  8. Do not disconnect your handset until you see the message “Handset firmware has been updated successfully”.

QuickSync Software for Mac (version 2.1.1)

 

Added support for the following devices:

  • SL910H incl. firmware update
  • DE310
  • DE410
  • DE700
  • DE900
  • SL610 Pro


Support for MacOS 10.7 (also supported: 10.6 & 10.5)

AppleScript interface for dialing

Example:
tell application "QuickSyncServices.service"
dial "089 12345" with phone "SL78H"
end tell

Please check the following items:

  • Set the area and country codes in the QuickSync software and the Gigaset phone correctly. Wrong settings can lead to wrong synchronizations.
  • Please backup your Mac address book contacts before the first sync. (See QuickSync help)

Firmware update 07/2012 (Version 80.053.05) - Gigaset SL400, SL400A, SL400H


Improvements:

------------------

1. Quality of speech in handsfree mode

2. Programming of right soft key remains after turning mobile part off and on again

How to update the handset of Gigaset SL400 family:

-----------------------------------------------------------

1. Please start the software "Gigaset QuickSync" on your PC. You will find it on the internet at gigaset.com/hq/en/cms/PageQuickSync.html

2. Please carry out the update of the Gigaset QuickSync software if it is offered.

3. Connect the handset directly to your PC via a mini USB cable. (Do not connect the USB cable via a USB HUB to your PC; failures may occur).

4. Leave the batteries in the handset and switch the handset on. If necessary the device driver software of your handset will be installed automatically on your PC.

5. Establish a connection to the handset with the Gigaset QuickSync.

6. If a new handset firmware is available, a prompt automatically appears. 

7. The firmware will be installed on your handset in several cycles. 

8. Do not disconnect your handset until you see the message “Handset firmware has been updated successfully”.

Gigaset Quick Sync version 8.0 (64bit)

Please see below for details.

Gigaset SL400, SL400H, SL400A, SL400 Duo - Firmware update 05/2013 (Version 80.053.06)

New software release 80.053.06 supports new Gigaset Repeater (est. product launch May 2013).

Gigaset Quick Sync version 8.2 (64bit)