Assistance pour Gigaset A540

Gigaset A540
Bienvenue sur la page d'assistance du Gigaset A540. Au sein de cette rubrique, vous trouverez des répons plues aux questions less fréquentes. Des manuels utilisateurs, ainsi que des logiciels et micrologiciels à télécharger. Vous trouverez également des tutoriels vidéos, qui vous aideront dans vos installations. Dans le cas d'un produit défectueux, vous pouvez enregistrer votre Gigaset A540 afin qu'il soit réparé. De plus, vous trouverez des accessoires pour votre Gigaset A540. Si vous souhaitez vérifier avec quels produits votre Gigaset A540 est compatible, retrouvez l'intégralité de la liste ci-dessous. Enfin, vous pouvez également comprendre apprendre comment enregistrer votre Gigaset A540 avec d'autres périphériques.

Réponses aux questions les plus fréquentes

Vous avez des questions concernant un produit Gigaset ? Trouvez les réponses ici.

Top 10 FAQs

  • First steps for troubleshooting
  • Notes on operating a Gigaset phone on the analog telephone connection of a router or modem

    If you operate your Gigaset on the telephone connection of a router/modem, make sure that you have noticed the following points:


    • Use the phone cable from the Gigaset packaging.
    • If the router or modem does not have a phone jack, it is necessary to use the enclosed phone cable or the enclosed phone adapter of your router/modem.
    • Connect the cable to the router`s phone jack / phone port / FON port.
    • Please check if your telephone data (internet telephone number, provider-profile, …) for the used telephone connection in the router/modem were entered correctly.
    • Please make sure that your internet connection is working.


    If the problem persists, please contact your provider.

  • Notes on Caller ID (CID)

    By default, the number of the caller is shown in the display of your Gigaset telephone. You do not have to make any other settings on your Gigaset telephone. However, if the caller's number is not displayed, this can be due to the following:

    - You have not ordered CID from your network provider or
    - Your telephone is connected through a PBX that does not transmit all information.

    Is your telephone connected through a PBX/gateway?
    You can establish this by checking for an additional device connected between your telephone and house connection, e.g., a PBX, gateway etc.
    In most cases, simply resetting this device will remedy the situation:
    - Briefly disconnect the power plug of your PBX.
    - Re-insert the plug and wait for the device to restart.

    If the caller number is still not displayed:
    Check the CID settings of your PBX and activate this function if necessary. In the user guide for the device, search for the term "CID" (or an alternative term such as "phone number transmission", "caller ID", ..).

    If necessary, contact the device manufacturer. If this does not resolve the problem, it is possible that your network provider does not support the CID service for this number.

    Have you ordered the CID service from your network provider?
    Check whether your provider supports Caller ID (CID) and that the function has been activated for you. If necessary, contact your provider.

  • Which batteries should I use for the Gigaset handset?

    Recommented batteries:

    For Gigaset handsets, use only the batteries approved by Gigaset. The high quality standard guarantees safe use and a long service life.
    NiMh round cells type AAA can be purchased in our Gigaset online shop.

  • Fundamental reset of the base station

    Fundamental reset of the base station

    • Disconnect mains.
    • Press paging key on base station and hold down.
    • Plug in power supply.
    • Hold key pressed for more than 5 seconds. Release the paging key.

    The base station is now set to factory defaults.
    The system-PIN is reset to 0000 and all handsets are deregistered.

  • Reset handset

    With the following procedure all handset settings including the directory, redial list etc. will be deleted!

    • Switch off handset
    • Hold down the keys 1, 4, 7 and switch the handset on
    • "Service" will be displayed
    • Enter 4 6 8 5 4 6 3
    • The handset switches off

  • Base PIN Reset

    Handset in idle mode:

    • Press menu key
    • Enter * # 0 5 #
    • Enter 3 7 6 2 0 0 0

    Afterwards the base system code is 0000.

  • Managing directory entries
  • How I can register a repeater?
  • Time control for external calls

toutes les FAQ par sujet

  • D
  • F
    • First steps for troubleshooting
      • First steps for troubleshooting
      • Notes on operating a Gigaset phone on the analog telephone connection of a router or modem

        If you operate your Gigaset on the telephone connection of a router/modem, make sure that you have noticed the following points:


        • Use the phone cable from the Gigaset packaging.
        • If the router or modem does not have a phone jack, it is necessary to use the enclosed phone cable or the enclosed phone adapter of your router/modem.
        • Connect the cable to the router`s phone jack / phone port / FON port.
        • Please check if your telephone data (internet telephone number, provider-profile, …) for the used telephone connection in the router/modem were entered correctly.
        • Please make sure that your internet connection is working.


        If the problem persists, please contact your provider.

  • N
    • Notes on Caller ID (CID)
      • Notes on Caller ID (CID)

        By default, the number of the caller is shown in the display of your Gigaset telephone. You do not have to make any other settings on your Gigaset telephone. However, if the caller's number is not displayed, this can be due to the following:

        - You have not ordered CID from your network provider or
        - Your telephone is connected through a PBX that does not transmit all information.

        Is your telephone connected through a PBX/gateway?
        You can establish this by checking for an additional device connected between your telephone and house connection, e.g., a PBX, gateway etc.
        In most cases, simply resetting this device will remedy the situation:
        - Briefly disconnect the power plug of your PBX.
        - Re-insert the plug and wait for the device to restart.

        If the caller number is still not displayed:
        Check the CID settings of your PBX and activate this function if necessary. In the user guide for the device, search for the term "CID" (or an alternative term such as "phone number transmission", "caller ID", ..).

        If necessary, contact the device manufacturer. If this does not resolve the problem, it is possible that your network provider does not support the CID service for this number.

        Have you ordered the CID service from your network provider?
        Check whether your provider supports Caller ID (CID) and that the function has been activated for you. If necessary, contact your provider.

  • P
  • R
    • Reset procedures
      • Base PIN Reset

        Handset in idle mode:

        • Press menu key
        • Enter * # 0 5 #
        • Enter 3 7 6 2 0 0 0

        Afterwards the base system code is 0000.

      • Fundamental reset of the base station

        Fundamental reset of the base station

        • Disconnect mains.
        • Press paging key on base station and hold down.
        • Plug in power supply.
        • Hold key pressed for more than 5 seconds. Release the paging key.

        The base station is now set to factory defaults.
        The system-PIN is reset to 0000 and all handsets are deregistered.

      • Reset handset

        With the following procedure all handset settings including the directory, redial list etc. will be deleted!

        • Switch off handset
        • Hold down the keys 1, 4, 7 and switch the handset on
        • "Service" will be displayed
        • Enter 4 6 8 5 4 6 3
        • The handset switches off

    • Repeater
  • T

Téléchargements

Obtenir les mises à jour des manuels et logiciels de votre produit Gigaset
Manuals
  • Gigaset A540-A540A Mode d'emploi (version complète) fr FR

Firmware
Software

Vérifier la compatibilité

Vérifier si un combiné Gigaset spécifique est compatible avec une base Gigaset ou un routeur DECT
Vérifier la compatibilité d'un combiné et d'une base en sélectionnant des fonctions.

Enregistrer un combiné sur une base

Vous avez une base Gigaset A540 et vous souhaitez enregistrer un combiné ?
Enregistrer un combiné avec votre Gigaset A540

Vous n'avez pas trouvé ce que vous recherchiez ?

Merci de contacter notre Hotline pour une assistance personnalisée.