Assistance pour Gigaset S790

Gigaset S790
Bienvenue sur la page d'assistance du Gigaset S790. Au sein de cette rubrique, vous trouverez des répons plues aux questions less fréquentes. Des manuels utilisateurs, ainsi que des logiciels et micrologiciels à télécharger. Vous trouverez également des tutoriels vidéos, qui vous aideront dans vos installations. Dans le cas d'un produit défectueux, vous pouvez enregistrer votre Gigaset S790 afin qu'il soit réparé. De plus, vous trouverez des accessoires pour votre Gigaset S790. Si vous souhaitez vérifier avec quels produits votre Gigaset S790 est compatible, retrouvez l'intégralité de la liste ci-dessous. Enfin, vous pouvez également comprendre apprendre comment enregistrer votre Gigaset S790 avec d'autres périphériques.

Réponses aux questions les plus fréquentes

Vous avez des questions concernant un produit Gigaset ? Trouvez les réponses ici.

Top 10 FAQs

  • First steps for troubleshooting
  • Base reset
    • Unplug the power-supply unit from the socket.
    • Press and hold down the paging key on the base station.
    • Plug in the power-supply unit again.
    • Keep the paging key on the base station pressed.
    • Release the paging key after 3 seconds.


    PLEASE NOTE! The entire contents of the memory will be deleted. All portable handsets will be deregistered. The system code will be reset to 0000.

  • Notes on operating a Gigaset phone on the analog telephone connection of a router or modem

    If you operate your Gigaset on the telephone connection of a router/modem, make sure that you have noticed the following points:


    • Use the phone cable from the Gigaset packaging.
    • If the router or modem does not have a phone jack, it is necessary to use the enclosed phone cable or the enclosed phone adapter of your router/modem.
    • Connect the cable to the router`s phone jack / phone port / FON port.
    • Please check if your telephone data (internet telephone number, provider-profile, …) for the used telephone connection in the router/modem were entered correctly.
    • Please make sure that your internet connection is working.


    If the problem persists, please contact your provider.

  • Notes on Caller ID (CID)

    By default, the number of the caller is shown in the display of your Gigaset telephone. You do not have to make any other settings on your Gigaset telephone. However, if the caller's number is not displayed, this can be due to the following:

    - You have not ordered CID from your network provider or
    - Your telephone is connected through a PBX that does not transmit all information.

    Is your telephone connected through a PBX/gateway?
    You can establish this by checking for an additional device connected between your telephone and house connection, e.g., a PBX, gateway etc.
    In most cases, simply resetting this device will remedy the situation:
    - Briefly disconnect the power plug of your PBX.
    - Re-insert the plug and wait for the device to restart.

    If the caller number is still not displayed:
    Check the CID settings of your PBX and activate this function if necessary. In the user guide for the device, search for the term "CID" (or an alternative term such as "phone number transmission", "caller ID", ..).

    If necessary, contact the device manufacturer. If this does not resolve the problem, it is possible that your network provider does not support the CID service for this number.

    Have you ordered the CID service from your network provider?
    Check whether your provider supports Caller ID (CID) and that the function has been activated for you. If necessary, contact your provider.

  • How can I update the software from my handset?

    To enable your handset to communicate with the PC, the Gigaset QuickSync program must be installed on your PC (free to download at gigaset.com/hq/en/cms/PageQuickSync.html). 

    The firmware-update of handsets is only supported by Gigaset QuickSync for Windows. The Gigaset QuickSync for MacOS supports only the firmware-update of the SL910H.

     

    Please make sure that you use the USB cable to connect the handset that you want to update, as updating via Bluetooth is not supported!

     

    If your handset is updatable and your PC is connected to the Internet, Gigaset QuickSync will automatically check for new firmware at least once a day, and if it is available it will prompt you to update your handset. You may disable this feature by unchecking the “Check Internet for new firmware and notify if update is available." checkbutton on the Settings - Firmware... page. It can also be disabled via the appropriate checkbox when Gigaset QuickSync prompts you to update your handset.

     

    You can always trigger the facility to check the Internet for new firmware manually:

    • Connect your phone to your PC using a USB data cable.
    • Start the Gigaset QuickSync program on your PC.
    • Establish a connection to your handset.
    • Click in the main menu of QuickSync on Firmware update.

     

    This launches the firmware update. The update process can take up to 10 minutes (not including the download time). Do not interrupt the process or remove the USB data cable. The data is initially loaded from the update server on the Internet. The amount of time this takes is dependent on the speed of your Internet connection.

    The display on your phone is switched off and the message key and the talk key start flashing. Once the update is complete, your phone will automatically restart.

  • Eco+ mode at Duo and Trio systems

    All handsets on a Duo or Trio system have to be switched on once to enable the base station to complete the registration data.

    Afterwards the Eco+ mode can be activated.
  • Which batteries should I use for the Gigaset handset?

    Recommented batteries:

    For Gigaset handsets, use only the batteries approved by Gigaset. The high quality standard guarantees safe use and a long service life.
    NiMh round cells type AAA can be purchased in our Gigaset online shop.

  • Characters on key 0 and 1 have changed

    The characters on key 0 and 1 from the keypad of the S79H have changed with SW version 36:


    old status: New line (CR) and space on key 1


    current status: New line (CR) and space on key 0

     

    In some older user guides the old status is described.

    These changes in the new software version were made to have the same functions on all keys with all handsets from the actual series.

  • New firmware for the handsets Gigaset SL400H, S79H and S810 available

    A new software version (053) for the handset SL400H, S79H and S810 is available:

     

    Improvements with this version:

    • As of this version, update also possible with a MAC PC
    • Improvements for operation on multi-cell systems
    • CLIP display is supported for incoming calls for Alcatel PBXs
  • Why isn't there any picture in the display during an incoming call?

    To see a picture in the display in addition to the number from an internal caller you have to achieve the following settings:

     

    • At least one picture must be stored in the Media pool from the handset/base (via Gigaset QuickSync)
    • A directory entry must be dedicated to a picture in the directory entry options.
    • The caller must show his number for outgoing calls.
    • The Network provider must support the CLIP function and this function must be activated

    .
    Important Note:

     

    If a handset with picture-CLIP-function is registered to an older base station it could be possible that there is no picture shown in the display due to incompatibility reasons.

     

    In these cases please have a look at our compatibility database and choose your combination to see if it is possible or not.

     

    gigaset.com/hq/en/cms/PageCustomerServicesCompatibility.html


toutes les FAQ par sujet

  • E
    • Eco+ mode
      • Eco+ mode at Duo and Trio systems

        All handsets on a Duo or Trio system have to be switched on once to enable the base station to complete the registration data.

        Afterwards the Eco+ mode can be activated.
  • F
    • Firmware / Update
      • Firmware 78.036.04 for S79H changes and improvements

        Improvements and changes:

        • Slideshow: The Screensaver menu has been extended by the function Slideshow. All pictures from the Screen-Saver folder are shown in idle mode one after the other.
        • keypad illumination: The brightness of the keypad illumination is now adjustable in 5 steps
        • 4 handsfree profiles: The handset now has 4 handsfree profiles:
          • Profile 1: Standard
          • Profile 2: For loud surroundings
          • Profile 3: Full duplex (only on a very good line)
          • Profile 4: Optimised for special connections
        • Setting a handsfree profile: In idle status, you can set various handsfree profiles to optimally adapt your phone to your environment. ·
          • Profile 1: The optimum setting for most connections and set as default.
          • Profile 2: Optimum volume in handsfree mode. However, this means that the participants cannot speak at the same time as the person speaking is given preferential transmission (making two-way conversations difficult).
          • Profile 3: Optimises two-way conversations, both callers can hear each other, even if they talk at the same time.
          • Profile 4: Optimised for special connections. If the default setting (profile 1) does not provide optimum sound, please give this a try.
        • additional display remark: If the display backlight is activated when the handset is not in the charger the customer is advised that this mode reduces the standby time significantly.
        • Deleting all appointments for one day: With this new option the customer can delete all appointments for 1 day.
        • picture CLIP with GAP bases: Picture CLIP is now supported on GAP bases. For other devices this depends on the software * Status display (e.g. AM1 = on ; INT 16) optimised
        • The character set position of "CR" and "Space" have been moved from key "1" to key "0"


        Gigaset S79H - Firmware update 05/2010 (version 78.036.04)

        How to update: 

        • Please start the software "Gigaset Quicksync" on your PC.
        • You will find it on the internet at gigaset.com/hq/en/cms/PageQuickSync.html
        • Please carry out the update of the Gigaset Quick Sync software if it is offered.
        • Remove the battery cover from your Gigaset S79H handset.
        • Connect the handset directly to your PC via a mini USB cable. (Do not connect the USB cable via a USB HUB to your PC; failures may occur).
        • Leave the batteries in the handset and switch the handset on. If necessary the device driver software of your handset will be installed automatically on your PC.
        • Choose “Connect handset automatically” in the Gigaset Quicksync window.
        • When a connection is set up, the message “S79H connected (n) (nnnnnnnnnn)” appears. If a new handset firmware is available, a prompt automatically appears.
        • The firmware will be installed on your handset in several cycles.
        • Do not disconnect your handset until you see the message “Handset firmware has been updated successfully”.
      • How can I update the software from my handset?

        To enable your handset to communicate with the PC, the Gigaset QuickSync program must be installed on your PC (free to download at gigaset.com/hq/en/cms/PageQuickSync.html). 

        The firmware-update of handsets is only supported by Gigaset QuickSync for Windows. The Gigaset QuickSync for MacOS supports only the firmware-update of the SL910H.

         

        Please make sure that you use the USB cable to connect the handset that you want to update, as updating via Bluetooth is not supported!

         

        If your handset is updatable and your PC is connected to the Internet, Gigaset QuickSync will automatically check for new firmware at least once a day, and if it is available it will prompt you to update your handset. You may disable this feature by unchecking the “Check Internet for new firmware and notify if update is available." checkbutton on the Settings - Firmware... page. It can also be disabled via the appropriate checkbox when Gigaset QuickSync prompts you to update your handset.

         

        You can always trigger the facility to check the Internet for new firmware manually:

        • Connect your phone to your PC using a USB data cable.
        • Start the Gigaset QuickSync program on your PC.
        • Establish a connection to your handset.
        • Click in the main menu of QuickSync on Firmware update.

         

        This launches the firmware update. The update process can take up to 10 minutes (not including the download time). Do not interrupt the process or remove the USB data cable. The data is initially loaded from the update server on the Internet. The amount of time this takes is dependent on the speed of your Internet connection.

        The display on your phone is switched off and the message key and the talk key start flashing. Once the update is complete, your phone will automatically restart.

      • New firmware for the handsets Gigaset SL400H, S79H and S810 available

        A new software version (053) for the handset SL400H, S79H and S810 is available:

         

        Improvements with this version:

        • As of this version, update also possible with a MAC PC
        • Improvements for operation on multi-cell systems
        • CLIP display is supported for incoming calls for Alcatel PBXs
      • What can I do if the handsfree key and the message key are flashing?
      • What can I do if the update from the handset was interrupted?
    • First steps for troubleshooting
      • First steps for troubleshooting
      • Notes on operating a Gigaset phone on the analog telephone connection of a router or modem

        If you operate your Gigaset on the telephone connection of a router/modem, make sure that you have noticed the following points:


        • Use the phone cable from the Gigaset packaging.
        • If the router or modem does not have a phone jack, it is necessary to use the enclosed phone cable or the enclosed phone adapter of your router/modem.
        • Connect the cable to the router`s phone jack / phone port / FON port.
        • Please check if your telephone data (internet telephone number, provider-profile, …) for the used telephone connection in the router/modem were entered correctly.
        • Please make sure that your internet connection is working.


        If the problem persists, please contact your provider.

  • K
    • Keypad
      • Characters on key 0 and 1 have changed

        The characters on key 0 and 1 from the keypad of the S79H have changed with SW version 36:


        old status: New line (CR) and space on key 1


        current status: New line (CR) and space on key 0

         

        In some older user guides the old status is described.

        These changes in the new software version were made to have the same functions on all keys with all handsets from the actual series.

  • N
    • Notes on Caller ID (CID)
      • Notes on Caller ID (CID)

        By default, the number of the caller is shown in the display of your Gigaset telephone. You do not have to make any other settings on your Gigaset telephone. However, if the caller's number is not displayed, this can be due to the following:

        - You have not ordered CID from your network provider or
        - Your telephone is connected through a PBX that does not transmit all information.

        Is your telephone connected through a PBX/gateway?
        You can establish this by checking for an additional device connected between your telephone and house connection, e.g., a PBX, gateway etc.
        In most cases, simply resetting this device will remedy the situation:
        - Briefly disconnect the power plug of your PBX.
        - Re-insert the plug and wait for the device to restart.

        If the caller number is still not displayed:
        Check the CID settings of your PBX and activate this function if necessary. In the user guide for the device, search for the term "CID" (or an alternative term such as "phone number transmission", "caller ID", ..).

        If necessary, contact the device manufacturer. If this does not resolve the problem, it is possible that your network provider does not support the CID service for this number.

        Have you ordered the CID service from your network provider?
        Check whether your provider supports Caller ID (CID) and that the function has been activated for you. If necessary, contact your provider.

  • P
    • Picture CLIP
      • Why isn't there any picture in the display during an incoming call?

        To see a picture in the display in addition to the number from an internal caller you have to achieve the following settings:

         

        • At least one picture must be stored in the Media pool from the handset/base (via Gigaset QuickSync)
        • A directory entry must be dedicated to a picture in the directory entry options.
        • The caller must show his number for outgoing calls.
        • The Network provider must support the CLIP function and this function must be activated

        .
        Important Note:

         

        If a handset with picture-CLIP-function is registered to an older base station it could be possible that there is no picture shown in the display due to incompatibility reasons.

         

        In these cases please have a look at our compatibility database and choose your combination to see if it is possible or not.

         

        gigaset.com/hq/en/cms/PageCustomerServicesCompatibility.html


    • Pile
      • Which batteries should I use for the Gigaset handset?

        Recommented batteries:

        For Gigaset handsets, use only the batteries approved by Gigaset. The high quality standard guarantees safe use and a long service life.
        NiMh round cells type AAA can be purchased in our Gigaset online shop.

  • R
    • Reset procedures
      • Base reset
        • Unplug the power-supply unit from the socket.
        • Press and hold down the paging key on the base station.
        • Plug in the power-supply unit again.
        • Keep the paging key on the base station pressed.
        • Release the paging key after 3 seconds.


        PLEASE NOTE! The entire contents of the memory will be deleted. All portable handsets will be deregistered. The system code will be reset to 0000.

  • S
    • Software update
      • How can I update the software from my handset?

        To enable your handset to communicate with the PC, the Gigaset QuickSync program must be installed on your PC (free to download at gigaset.com/hq/en/cms/PageQuickSync.html). 

        The firmware-update of handsets is only supported by Gigaset QuickSync for Windows. The Gigaset QuickSync for MacOS supports only the firmware-update of the SL910H.

         

        Please make sure that you use the USB cable to connect the handset that you want to update, as updating via Bluetooth is not supported!

         

        If your handset is updatable and your PC is connected to the Internet, Gigaset QuickSync will automatically check for new firmware at least once a day, and if it is available it will prompt you to update your handset. You may disable this feature by unchecking the “Check Internet for new firmware and notify if update is available." checkbutton on the Settings - Firmware... page. It can also be disabled via the appropriate checkbox when Gigaset QuickSync prompts you to update your handset.

         

        You can always trigger the facility to check the Internet for new firmware manually:

        • Connect your phone to your PC using a USB data cable.
        • Start the Gigaset QuickSync program on your PC.
        • Establish a connection to your handset.
        • Click in the main menu of QuickSync on Firmware update.

         

        This launches the firmware update. The update process can take up to 10 minutes (not including the download time). Do not interrupt the process or remove the USB data cable. The data is initially loaded from the update server on the Internet. The amount of time this takes is dependent on the speed of your Internet connection.

        The display on your phone is switched off and the message key and the talk key start flashing. Once the update is complete, your phone will automatically restart.

Téléchargements

Obtenir les mises à jour des manuels et logiciels de votre produit Gigaset
Manuals
  • Gigaset S790/S795 Mode d'emploi (version complète) fr FR

Firmware
  • Gigaset S79H- Mise à jour du logiciel du 05/2010 ( version 78.036.04)

    <!--

    /* Font Definitions */

    @font-face

    {font-family:Wingdings;

    panose-1:5 0 0 0 0 0 0 0 0 0;

    mso-font-charset:2;

    mso-generic-font-family:auto;

    mso-font-pitch:variable;

    mso-font-signature:0 268435456 0 0 -2147483648 0;}

    @font-face

    {font-family:"Cambria Math";

    panose-1:2 4 5 3 5 4 6 3 2 4;

    mso-font-charset:1;

    mso-generic-font-family:roman;

    mso-font-format:other;

    mso-font-pitch:variable;

    mso-font-signature:0 0 0 0 0 0;}

    @font-face

    {font-family:Calibri;

    panose-1:2 15 5 2 2 2 4 3 2 4;

    mso-font-charset:0;

    mso-generic-font-family:swiss;

    mso-font-pitch:variable;

    mso-font-signature:-1610611985 1073750139 0 0 159 0;}

    /* Style Definitions */

    p.MsoNormal, li.MsoNormal, div.MsoNormal

    {mso-style-unhide:no;

    mso-style-qformat:yes;

    mso-style-parent:"";

    margin-top:0cm;

    margin-right:0cm;

    margin-bottom:10.0pt;

    margin-left:0cm;

    line-height:115%;

    mso-pagination:widow-orphan;

    font-size:11.0pt;

    font-family:"Calibri","sans-serif";

    mso-ascii-font-family:Calibri;

    mso-ascii-theme-font:minor-latin;

    mso-fareast-font-family:Calibri;

    mso-fareast-theme-font:minor-latin;

    mso-hansi-font-family:Calibri;

    mso-hansi-theme-font:minor-latin;

    mso-bidi-font-family:"Times New Roman";

    mso-bidi-theme-font:minor-bidi;}

    .MsoChpDefault

    {mso-style-type:export-only;

    mso-default-props:yes;

    mso-ascii-font-family:Calibri;

    mso-ascii-theme-font:minor-latin;

    mso-fareast-font-family:Calibri;

    mso-fareast-theme-font:minor-latin;

    mso-hansi-font-family:Calibri;

    mso-hansi-theme-font:minor-latin;

    mso-bidi-font-family:"Times New Roman";

    mso-bidi-theme-font:minor-bidi;}

    .MsoPapDefault

    {mso-style-type:export-only;

    margin-bottom:10.0pt;

    line-height:115%;}

    @page WordSection1

    {size:612.0pt 792.0pt;

    margin:72.0pt 72.0pt 72.0pt 72.0pt;

    mso-header-margin:36.0pt;

    mso-footer-margin:36.0pt;

    mso-paper-source:0;}

    div.WordSection1

    {page:WordSection1;}

    /* List Definitions */

    @list l0

    {mso-list-id:102384299;

    mso-list-template-ids:-1548827142;}

    @list l0:level1

    {mso-level-number-format:bullet;

    mso-level-text:;

    mso-level-tab-stop:36.0pt;

    mso-level-number-position:left;

    text-indent:-18.0pt;

    mso-ansi-font-size:10.0pt;

    font-family:Symbol;}

    @list l1

    {mso-list-id:325280342;

    mso-list-template-ids:-299450290;}

    @list l1:level1

    {mso-level-number-format:bullet;

    mso-level-text:;

    mso-level-tab-stop:36.0pt;

    mso-level-number-position:left;

    text-indent:-18.0pt;

    mso-ansi-font-size:10.0pt;

    font-family:Symbol;}

    @list l1:level2

    {mso-level-number-format:bullet;

    mso-level-text:o;

    mso-level-tab-stop:72.0pt;

    mso-level-number-position:left;

    text-indent:-18.0pt;

    mso-ansi-font-size:10.0pt;

    font-family:"Courier New";}

    @list l2

    {mso-list-id:1332027054;

    mso-list-template-ids:1999012834;}

    @list l2:level1

    {mso-level-number-format:bullet;

    mso-level-text:;

    mso-level-tab-stop:36.0pt;

    mso-level-number-position:left;

    text-indent:-18.0pt;

    mso-ansi-font-size:10.0pt;

    font-family:Symbol;}

    @list l3

    {mso-list-id:1899045937;

    mso-list-template-ids:-1672856156;}

    @list l3:level1

    {mso-level-number-format:bullet;

    mso-level-text:;

    mso-level-tab-stop:36.0pt;

    mso-level-number-position:left;

    text-indent:-18.0pt;

    mso-ansi-font-size:10.0pt;

    font-family:Symbol;}

    ol

    {margin-bottom:0cm;}

    ul

    {margin-bottom:0cm;}

    -->

     

    Comment mettre

    à jour votre logiciel :


    • Démarrer le logiciel Gigaset Quicksync sur votre PC. Vous le trouverez sur internet à l’adresse suivante : gigaset.com/hq/en/cms/PageQuickSync.html
    • Effectuer la mise à jour du logiciel Gigaset Quick Sync lorsque l’on vous invite à le faire
    • Retirer le cache-batterie du combiné de votre Gigaset S79H
    • Connecter votre combiné directement sur votre PC via un mini câble USB (Ne connecter pas le câble USB via un port USB sur votre PC, cela risquerait de faire échouer le processus)
    •  Laisser la batterie dans le combiné et allumer votre combiné. Si nécessaire, le logiciel de votre combiné sera automatiquement installé sur votre PC
    • Choisir «  Connecter un combiné automatiquement » dans la fenêtre du logiciel Gigaset QuickSync
    • Quand la connexion est établie, le message «  S79H connecté (n) (nnnnnnnnnn)” » apparaît. Si un nouveau combiné est disponible, une fenêtre s’ouvrira automatiquement
    • Le logiciel sera installé sur votre combiné en plusieurs étapes
    • Ne pas déconnecter votre combiné jusqu’à voir apparaître le message suivant : « Le combiné a été mis à jour avec succès »



     

    Améliorations et changements

    • Diaporama: Le menu économiseur d’écran est maintenant doté de la fonction Diaporama. Toutes les photos du fichier de l’économiseur d’écran défilent en mode aléatoire les unes après les autres
    • Clavier rétro-éclairé: la luminosité de l’écran est réglable en 5 étapes.
    • 4 profils mains-libres: le combiné a maintenant 4 profils mains-libres
      • Profil n°1: Standard
      • Profil n° 2: Où l’environnement sonore est perturbé (mode Half Duplex)
      • Profil n° 3: Full duplex (seulement sur une bonne ligne téléphonique)
      • Profil n°4: Optimisé pour des connexions spéciales.


    Installer un

    profil mains-libres

    Vous pouvez installer différents profils mains-libres pour adapter au

    mieux votre téléphone à votre environnement

    • Profil  n°1: La configuration optimale pour la plupart des communications, installée par défaut.
    • Profil n°2: Qualité optimale en mode mains-libres. Cependant, cela signifie que les participants ne peuvent pas parler en même temps  (mode Half Duplex)
    • Profil n° 3: Optimise la conversation en mode Full Duplex, c’est-à-dire que les deux appelants peuvent s’entendre, même s’ils parlent en même temps
    • Profil n°4: Si les paramètres par défaut ( profil n°1) ne restitue pas un son optimal, essayer le profil n°4


     

    • Remarques supplémentaires concernant l’affichage: Si l’écran retro-éclairé est actif lorsque que le combiné n’est pas en charge, cela réduit considérablement son autonomie
    • Annuler tous ses rendez-vous pour une journée donnée: Avec cette nouvelle option, le client pour annuler tous ses rendez-vous pour la journée.
    • Affichage de statuts (exemples AM1 = on ; INT 16) optimisé




    Descriptions de

    mise à jour du logiciel Firmware: 

    • Les photos et les sonneries stockées sur le combiné doivent être stockées sur le PC car des données sont effacées lors des mises à jour d’urgence !
    • Si la mise à jour du logiciel ne fonctionne pas via un port USB, connecter le combiné directement au PC




     Télécharger ces informations ici

    Download
Software
  • QuickSync Version 8.6 (64 bit Version)

    Gigaset QuickSync for Windows

    The new Gigaset phones let you exchange your contact data both quickly and easily. Plus, you can sync your address book data. Gigaset QuickSync for fast and easy synchronization of your PC address book with your Gigaset phone.

    NEW: Cloud synchronisation with Google™ contacts.

    Thanks to this convenient software, you can easily synchronize your addresses in Google™ contacts, Microsoft® Outlook®, Windows® contacts (Windows® Vista, Windows® 7 or Windows® 8) with your Gigaset phone via Bluetooth®, a data transfer cable or Ethernet network connection.

     

    General information 

    Supported Operating Systems:  

    • Windows® Vista (32 and 64 bit)
    • Windows® 7 (32 and 64 bit)
    • Windows® 8 and 8.1 (32 and 64 bit)
    • Windows® 10 (32 and 64 bit)

     

     Supported programs: 

    • Google™ Contacts (Cloud service via Internet)
    • Windows® Contacts (on Windows® Vista, Windows® 7, Windows® 8/8.1 and Windows® 10)
    • Microsoft® Outlook® 2007, 2010, 2013 and 2016 (all in 32 bit version only)

     

    Features of Gigaset QuickSync Windows® application: 

    • Fast synchronization between your PC address book and Gigaset handset or desktop base
    • Download of ringer melodies, screen savers and caller’s pictures
    • Support all (not copyright protected) music formats on the PC - real sounds (e.g. MP3, AAC, …) with automatic conversion to phone's (G.722) format during download 
    • Ringtone Editor: User can comfortably select, which part of the melody will be sent to handset
    • Picture Editor: User can comfortably select, which part of the picture will be sent to handset
    • Automatic picture transfer from Outlook® contacts into handset address book (only for SL910H, S820H, S850H, S850HX, SL450H, SL450HX, SL350H, SL360HS, CL660HX and S650H PRO, SL750H PRO)
    • Caller pictures in Outlook® contacts are automatically associated with the address book entry
    • For Contacts in Outlook® 2007, 2010, 2013 and 2016; up to 244 pictures synchronized
    • Full resolution with caller pictures starting with Outlook® 2010, previous versions provide limited resolutions. 
    • Support of multiple phones with user friendly names

     

    CTI-Functionality (telephony modus):

    • Support of Windows® Telephony Interface for e.g. dialing directly from Outlook® contacts
    • incoming calls are displayed on the PC
    • CTI via Bluetooth for SL910H, S820H, SL78H, SL400H, S800H, S810H, S850H, S850HX, SL450H, SL450HX, SL360HS and SL610H PRO, S510H PRO, S650H PRO, SL750H PRO
    • CTI via USB for S79H, CL660HX and SL350H
    • CTI via Ethernet for DL500A, DX600A ISDN, DX800A all in one, DE700, DE900, DE310 and DE410.
    • Bluetooth connection setup integrated with QuickSync
    • Auto start Gigaset QuickSync when Windows® starts (option)

     

    Support of Gigaset SL910H, S820H, SL78H, S79H, S800H, S810H and SL400H, S850H, S850HX, SL450H, SL450HX, SL360HS, SL350H, CL660HX as well as S510H PRO, SL610H PRO and SL750H PRO: 

    • USB-Drivers (WHQL-certified) provided for USB-Interface
    • Synchronization of up to 500 Address book Entries
    • Automatic check for new Firmware-Versions (daily) 
    • Handset Firmware-Update (only via USB-connection)

     

    Support of DL500A, DX600A ISDN, DX800A all in one, DE310 IP PRO and DE410 IP PRO:

    • Synchronization of up to 1000 Address book Entries 
    • local network connection

     

    Support of DE700 IP PRO and DE900 IP PRO: 

    • synchronization of additional contact`s phone numbers and fields like caller`s picture or address

     

    Gigaset QuickSync is compatible with the following Gigaset handsets:

    • Gigaset CL660HX
    • Gigaset S850H, S850HX, SL450H, SL450HX, SL360HS
    • Gigaset SL910, SL910A, SL910H, S820, S820A, S820H, SL400, SL400A, SL400H, SL350H
    • Gigaset SX810ISDN, SX810A ISDN,S810H, SX790ISDN, SX790A ISDN
    • Gigaset SL610H PRO, S510H PRO, S650H PRO, SL750H PRO
    • Gigaset SL785, SL780, SL78H,  S795, S790, S79H, S850H PRO

     

    Gigaset QuickSync is compatible with Gigaset desktop phones:

    • Gigaset DL500A, DX600A ISDN, DX800A all in one, DE700 IP PRO, DE900 IP PRO, DE310 IP PRO, DE410 IP PRO

     

    Release notes (September 2016) 

    Version 8.6

    • NEW: Support of handsets Gigaset CL660HX, SL350H and SL360HS

     

    Download
  • QuickSync Version 8.6 (32 bit Version)

    Gigaset QuickSync for Windows

    The new Gigaset phones let you exchange your contact data both quickly and easily. Plus, you can sync your address book data. Gigaset QuickSync for fast and easy synchronization of your PC address book with your Gigaset phone.

    NEW: Cloud synchronisation with Google™ contacts.

    Thanks to this convenient software, you can easily synchronize your addresses in Google™ contacts, Microsoft® Outlook®, Windows® contacts (Windows® Vista, Windows® 7 or Windows® 8) with your Gigaset phone via Bluetooth®, a data transfer cable or Ethernet network connection.

     

    General information 

    Supported Operating Systems:  

    • Windows® Vista (32 and 64 bit)
    • Windows® 7 (32 and 64 bit)
    • Windows® 8 and 8.1 (32 and 64 bit)
    • Windows® 10 (32 and 64 bit)

     

     Supported programs: 

    • Google™ Contacts (Cloud service via Internet)
    • Windows® Contacts (on Windows® Vista, Windows® 7, Windows® 8/8.1 and Windows® 10)
    • Microsoft® Outlook® 2007, 2010, 2013 and 2016 (all in 32 bit version only)

     

    Features of Gigaset QuickSync Windows® application: 

    • Fast synchronization between your PC address book and Gigaset handset or desktop base
    • Download of ringer melodies, screen savers and caller’s pictures
    • Support all (not copyright protected) music formats on the PC - real sounds (e.g. MP3, AAC, …) with automatic conversion to phone's (G.722) format during download 
    • Ringtone Editor: User can comfortably select, which part of the melody will be sent to handset
    • Picture Editor: User can comfortably select, which part of the picture will be sent to handset
    • Automatic picture transfer from Outlook® contacts into handset address book (only for SL910H, S820H, S850H, S850HX, SL450H, SL450HX, SL350H, SL360HS, CL660HX and S650H PRO, SL750H PRO)
    • Caller pictures in Outlook® contacts are automatically associated with the address book entry
    • For Contacts in Outlook® 2007, 2010, 2013 and 2016; up to 244 pictures synchronized
    • Full resolution with caller pictures starting with Outlook® 2010, previous versions provide limited resolutions. 
    • Support of multiple phones with user friendly names

     

    CTI-Functionality (telephony modus):

    • Support of Windows® Telephony Interface for e.g. dialing directly from Outlook® contacts
    • incoming calls are displayed on the PC
    • CTI via Bluetooth for SL910H, S820H, SL78H, SL400H, S800H, S810H, S850H, S850HX, SL450H, SL450HX, SL360HS and SL610H PRO, S510H PRO, S650H PRO, SL750H PRO
    • CTI via USB for S79H, CL660HX and SL350H
    • CTI via Ethernet for DL500A, DX600A ISDN, DX800A all in one, DE700, DE900, DE310 and DE410.
    • Bluetooth connection setup integrated with QuickSync
    • Auto start Gigaset QuickSync when Windows® starts (option)

     

    Support of Gigaset SL910H, S820H, SL78H, S79H, S800H, S810H and SL400H, S850H, S850HX, SL450H, SL450HX, SL360HS, SL350H, CL660HX as well as S510H PRO, SL610H PRO and SL750H PRO: 

    • USB-Drivers (WHQL-certified) provided for USB-Interface
    • Synchronization of up to 500 Address book Entries
    • Automatic check for new Firmware-Versions (daily) 
    • Handset Firmware-Update (only via USB-connection)

     

    Support of DL500A, DX600A ISDN, DX800A all in one, DE310 IP PRO and DE410 IP PRO:

    • Synchronization of up to 1000 Address book Entries 
    • local network connection

     

    Support of DE700 IP PRO and DE900 IP PRO: 

    • synchronization of additional contact`s phone numbers and fields like caller`s picture or address

     

    Gigaset QuickSync is compatible with the following Gigaset handsets:

    • Gigaset CL660HX
    • Gigaset S850H, S850HX, SL450H, SL450HX, SL360HS
    • Gigaset SL910, SL910A, SL910H, S820, S820A, S820H, SL400, SL400A, SL400H, SL350H
    • Gigaset SX810ISDN, SX810A ISDN,S810H, SX790ISDN, SX790A ISDN
    • Gigaset SL610H PRO, S510H PRO, S650H PRO, SL750H PRO
    • Gigaset SL785, SL780, SL78H,  S795, S790, S79H, S850H PRO

     

    Gigaset QuickSync is compatible with Gigaset desktop phones:

    • Gigaset DL500A, DX600A ISDN, DX800A all in one, DE700 IP PRO, DE900 IP PRO, DE310 IP PRO, DE410 IP PRO

     

    Release notes (September 2016) 

    Version 8.6

    • NEW: Support of handsets Gigaset CL660HX, SL350H and SL360HS

     

    Download
  • QuickSync Version 3.6 (Mac OS 10.7 - 10.12 Sierra)

    Gigaset QuickSync for Mac

    Gigaset QuickSync allows you to easy synchronize your Mac OS contacts with your address data on Gigaset handsets via  Bluetooth®, USB cable or ethernet (LAN) (depending on the device one or more connection types are available).

     

    General information 

    Supported Operating Systems:  

    • Mac OS X 10.11 El Capitan, 10.10 Yosemite, 10.9, 10.8, 10.7

     

    Features of Gigaset QuickSync for Mac: 

    • Synchronization between Mac addressbook (including iCloud) and supported Gigaset handsets
    • Download of ringer tones, screen savers and picture clips
    • Supports all Quicktime audio formats – automatic conversion into G.722 format during download to handset
    • Ringtone editor: you can select, how many seconds of the music will be transferred
    • Automatic picture transfer from Mac address book (only for SL910H and S820H)

     

    CTI functionality: Dialing of phone numbers on a connected Gigaset phone:

    • You can select a phone number within a program (e.g. Safari) and start dialing via the context menu
    • The connected phone (Gigaset handset or desktop phone) dials the number in listening-in mode
      (context menu has to be activated via System settings->Keypad->Shortcuts->Services)
    • Support of several handsets with individual names for each handset

     

    Gigaset QuickSync is compatible with the following Gigaset handsets: 

    • Gigaset CL660HX, SL785, SL780, SL78H, SL565, SL560, SL56, SL400, SL400A, SL400H, SL375, SL370, SL37H, S810, S810A, S810H, S800, S800A, S800H, S820, S820A, S820H, S850H, S850HX, SL350, SL360HS, SL450H, SL450HX, SL910, SL910A, SL910H, S790, S795, S79H, SX790 ISDN, SX795 ISDN, S685, S680, SX685 isdn, SX680 isdn, S685 IP, S68H, S510H PRO, S650H PRO, SL610H PRO und SL750H PRO.

     

    Gigaset QuickSync is compatible with Gigaset desktop phones:

    • Gigaset DL500A, DX600A ISDN, DX800A all in one, DE310, DE410, DE700, DE900 IP PRO

     

    Release Notes (November 2016)

    Version 3.6

    • NEW: Mac OS 10.12 Sierra support 

     


    Release Notes (January 2016)

    Version 3.5.1

    • NEW: Mac OS 10.11 El Captan support
    Download
  • QuickSync Version 3.0.2 (Mac OS 10.5 - 10.9)

    Gigaset QuickSync for Mac

    Gigaset QuickSync allows you to easy synchronize your Mac OS contacts with your address data on Gigaset handsets via  Bluetooth®, USB cable or ethernet (LAN) (depending on the device one or more connection types are available).

     

    General information 

    Supported Operating Systems:  

    • Mac OS X 10.11 El Capitan, 10.10 Yosemite, 10.9, 10.8, 10.7

     

    Features of Gigaset QuickSync for Mac: 

    • Synchronization between Mac addressbook (including iCloud) and supported Gigaset handsets
    • Download of ringer tones, screen savers and picture clips
    • Supports all Quicktime audio formats – automatic conversion into G.722 format during download to handset
    • Ringtone editor: you can select, how many seconds of the music will be transferred
    • Automatic picture transfer from Mac address book (only for SL910H and S820H)

     

    CTI functionality: Dialing of phone numbers on a connected Gigaset phone:

    • You can select a phone number within a program (e.g. Safari) and start dialing via the context menu
    • The connected phone (Gigaset handset or desktop phone) dials the number in listening-in mode
      (context menu has to be activated via System settings->Keypad->Shortcuts->Services)
    • Support of several handsets with individual names for each handset

     

    Gigaset QuickSync is compatible with the following Gigaset handsets: 

    • Gigaset CL660HX, SL785, SL780, SL78H, SL565, SL560, SL56, SL400, SL400A, SL400H, SL375, SL370, SL37H, S810, S810A, S810H, S800, S800A, S800H, S820, S820A, S820H, S850H, S850HX, SL350, SL360HS, SL450H, SL450HX, SL910, SL910A, SL910H, S790, S795, S79H, SX790 ISDN, SX795 ISDN, S685, S680, SX685 isdn, SX680 isdn, S685 IP, S68H, S510H PRO, S650H PRO, SL610H PRO und SL750H PRO.

     

    Gigaset QuickSync is compatible with Gigaset desktop phones:

    • Gigaset DL500A, DX600A ISDN, DX800A all in one, DE310, DE410, DE700, DE900 IP PRO

     

    Release Notes (November 2016)

    Version 3.6

    • NEW: Mac OS 10.12 Sierra support 

      


    Release Notes (January 2016)

    Version 3.5.1

    • NEW: Mac OS 10.11 El Captan support
    Download
  • Sauvergarde de sonneries et d'économiseurs d'écran sur le Gigaset S79H

    Si vous avez besoin des sonneries et des économiseurs d'écran qui étaient stockés sur le combiné de votre Gigaset à l'achat, vous pouvez les télécharger grâce au logiciel Gigaset QuickSync.

    Download

Vérifier la compatibilité

Vérifier si un combiné Gigaset spécifique est compatible avec une base Gigaset ou un routeur DECT
Vérifier la compatibilité d'un combiné et d'une base en sélectionnant des fonctions.

Enregistrer un combiné sur une base

Vous avez une base Gigaset S790 et vous souhaitez enregistrer un combiné ?
Enregistrer un combiné avec votre Gigaset S790

Vous n'avez pas trouvé ce que vous recherchiez ?

Merci de contacter notre Hotline pour une assistance personnalisée.