Sıkça Sorulan Soruların
Cevapları

Telefonunuz hakkında bir sorunuz mu var? Burada cevabını bulabilirsiniz. Sadece ürününüzün kategorisini seçin (örn.ISDN telefonlar) ve ilgili ürüne tıklayın. Eğer ürün kategorisini bilmiyorsanız 'Tüm Ürünler' başlığı altından ürününüzü bulabilirsiniz.

Lütfen bir ürün kategorisi ve/veya ürün seçin.


Analog Phones

Top FAQ

  • Base reset
    • Unplug the power-supply unit from the socket.
    • Press and hold down the paging key on the base station.
    • Plug in the power-supply unit again.
    • Keep the paging key on the base station pressed.
    • Release the paging key after 3 seconds.


    PLEASE NOTE! The entire contents of the memory will be deleted. All portable handsets will be deregistered. The system code will be reset to 0000.

    Rate this FAQ:
  • Reset the handset to factory conditions
    • Turn off the handset.
    • Turn it on with the pressed key-combination 1 - 4 - 7.
    • Enter the following keys: 4 - 6 - 8 - 5 - 4 - 6 - 3


    The following handset settings are in factory condition now:

    Directory

    Tones

    Language

    Softkeys

    Select Base: Best Base

    Rate this FAQ:
  • Reset the base station to factory conditions

    How do I completely reset the base station?

     

    Unplug the power-supply unit from the socket.

    Press and hold down the paging key on the base station.

    Plug in the power-supply unit again.

    Keep the paging key on the base station pressed for 7 more seconds.

    PLEASE NOTE!

    After the power-supply unit has been plugged in, the paging key must not be held down for longer than thirty seconds. If it is, you will hear a loud noise!!!

    The noise can be stopped by carrying out the reset again.

    The entire contents of the memory will be deleted.

    All portable handsets will be deregistrationed.

    The system code will be reset to 0000.

    Rate this FAQ:
  • Will the base station ring on an incoming call?

    The base station Gigaset C380/385 have an integrated loudspeaker so on an external call the handset and base will ring.

    It is possible to change or switch off the ringer volume from the base.

    Rate this FAQ:
  • How can I deregister handsets from the base?

    Handsets can only be de-registered by resetting the base station to its default settings.

    This will also reset every other setting

    GC385_reset_base_eng.jpg
    Rate this FAQ:
  • The callers list of the Gigaset C380 / C385 adds each call to its list that is taken by another extension of the PABX. How is it possible to avoid that?

    It is possible to deactivate the callers list.

    This leads to to the fact that no calls will be accepted anymore.

    To deactivate or activate the callers list follow this instruction:

    • Open Menu Press right of the control key
    • Enter via keypad 7 4 9 4 7 6 2 0 0 5
    • Enter the following figures slowly: 9 4 7 6 2 0 0 5
    • You now have the following options: Press 1, to deactivate the callers list. Press 0, to activate the callers list.
    • Confirm with the OK softkey
    GC 385_menu_key_eng.jpg
    Rate this FAQ:
  • Does the C38H / C380 / C385 support OPCAP

    English: Open Platform For Cordless Applications

    The meaning of OPCAP:

    Open Platform For Cordless Applications

    This interface allows using different applications with a cordless telephone.

    The handset Gigaset C38H supports OPCAP.

    The base stations Gigaset C380 / C385 supports OPCAP.

    The support of OPCAP affords you to register the Gigaset M34 USB to the base station Gigaset C380 / C385 and to use its functions. These are among others:

     

    VoIP with Skype. The PC needs a separate internet connection.

    Remote control from PC programs

    Use of messenger programs like MSN, Yahoo, ICQ, and others.

    Configuration of directories.

    Rate this FAQ:
  • The callers list of the Gigaset C380 / C385 adds each call to its list that is taken by another extension of the PABX. How is it possible to avoid that?

    • It is possible to deactivate the callers list.

    • This leads to to the fact that no calls will be accepted anymore.

    • To deactivate or activate the callers list follow this instruction:

    Open Menu  

     

    Press right of the control key

    7  4  

     

     

    Enter via keypad 7 4

     9 4 7 6 2 0 0 5    

    Enter the following figures slowly: 
    9 4 7 6 2 0 0 5

    1 = OFF
    0 = ON (default)
       

    You now have the following options:
    Press 1, to deactivate the callers list.
    Press 0, to activate the callers list.

    OK    

    Confirm with the OK softkey

    Rate this FAQ:
  • Which headsets are compatible?

    The following headsets have been tested with the C38H:

    Plantronics M40

    Plantronics MX100

    Plantronics MX150

    A compatibility list of tested headsets can be found on the Internet at www.plantronics.com/productfinder.

    With a connecting cable 8800-00-61 from GN/Jabra you can use:

    GN 2200 Mon NC

    GN 2000 sound tube

    GN 2000 Mono NC

    GN 2100 3in1 Micro

    GN 2100 3in1 Flex NC

    GN 2200 Duo Flex NC

    GN 2000 sound tube

    GN 2000 Duo NC

    GN 2100 Duo Micro

    GN 2100 Duo Flex NC

    Rate this FAQ:

Gigaset C385 - FAQ Topics

    A

  • Audio / Ringer Tones
  • Answering machine
  • C

  • Compatibility / Accessories
  • Call list
  • D

  • Directory / Phone book
  • Date/Time
  • Display
  • H

  • Headset interface
  • R

  • Redial
  • Radio connection
  • Reset procedures
  • Registering
  • S

  • Settings / Using / Handling
  • U

  • Using behind PABX