Sıkça Sorulan Soruların

Telefonunuz hakkında bir sorunuz mu var? Burada cevabını bulabilirsiniz. Sadece ürününüzün kategorisini seçin (örn.ISDN telefonlar) ve ilgili ürüne tıklayın. Eğer ürün kategorisini bilmiyorsanız 'Tüm Ürünler' başlığı altından ürününüzü bulabilirsiniz.

Lütfen bir ürün kategorisi ve/veya ürün seçin.

Analog Phones


  • How can I connect the PC with the telephone's Web configurator?

    Prerequisites: A standard Web browser is installed on the PC e.g., Internet Explorer version 6.0 or higher, or Firefox version 1.0.4 or higher. The phone and PC are directly connected with each other via a router. The settings of any existing firewall installed on your PC allow the PC and phone to communicate with each other.

    There are two ways of connecting your PC to the Web configurator on the Gigaset:


    1. Via the phone's IP address in the local network

    Establish the current IP address of the phone. It is displayed when you open the following menu:

    • Menu-Settings-System-Local Network (enter PIN)

    Your phone's IP address can change if you have activated dynamic IP address Assignment

    • Launch the Web browser on your PC.
    • Enter http:// and the telephone's current IP address (for example: into the address field of the Web browser.
    • Press the return key.

    A connection is established to the phone's Web configurator.

    If one of the four parts of the IP address contains leading zeros (e.g., 002), these zeros must not be entered in the Web browser address field. Otherwise, the Web browser will not be able to establish a connection to the Web configurator.
    Example: The IP address is displayed on the phone. should be entered in the address field.

    2. Via the Gigaset configuration service, if the phone and PC are connected to the Internet

    Prerequisite: Your PC and phone are connected to the Internet.


    • Launch the Web browser on your PC.
    • Enter one of the following URLs into the Web browser's address field:

    • Press the return key.


    You will receive a message stating that the connection has been forwarded to phone.
    If several Gigaset phones can be reached via your Internet connection, you are asked which of these phones you would like to be connected to.
    After successfully forwarding the connection, the Web configurator's Login page is displayed in the Web browser.


    Please note:
    The connection between the PC and the Web configurator is a local connection (LAN connection). The Internet is only accessed to establish the connection.

    Rate this FAQ:
  • Which additional handsets can I use?

    Basically all GAP compatible handsets can be used.

    The Gigaset compatibility database shows you which telephone functions and features are attuned with which device combinations

    Rate this FAQ:
  • For which purposes can I use the integrated bluetooth functionality?

    The bluetooth functionality was integrated to

    • use the handset in combination with a cordless bluetooth headset
    • copy telephone book entries (as VCards) via bluetooth
    • synchronize contacts from your PC (surrogate for data cable)
    Rate this FAQ:
  • Bluetooth accessory can not be registered to the S68H handset

    Please check, whether the Bluetooth accessory supports one of the

    given protocols, which are supported by the Gigaset handset:

    • headset profile (for Bluetooth headsets)
    • serial port profile (for PC connection)
    • OBject EXchange Profile (OBEX)



    the Bluetooth accessory was installed already, please delete the

    registration from the handset:

    • Bluetooth Menu
    • Known Devices
    • Select the accessory, e.g. a headset
    • Options
    • Delete Entry

    If it is again not possible to register the accessory to the handset, please check, whether the accessory supports a reset-function, and execute it. Please pay attention that perhaps previous settings will be deleted in the accessory.


    If you would like to use a headset already registered to another device (e.g., to a mobile phone) with your desktop phone, please deactivate this connection before you start the registration process.

    Rate this FAQ:
  • What has to be noticed in case of an incoming call?

    An incoming call will also be signalized at the bluetooth headset and can immediately be accepted by pressing the 'Accept button' (see manual of your bluetooth headset producer).

     If you accept the call with your Gigaset S68H device, and afterwards want to transfer the call to your headset, you also just need to press the accept button at your headset.

    In this case, the transfer of the call could take between 3 and 5 seconds. Within this period you should avoid to press the accept button twice, because you possibly could hang up the call.

    Rate this FAQ:
  • How man bluetooth devices can be managed by the Gigaset S68H?

    You are able to register up to 6 bluetooth devices, but just one bluetooth headset.

    Rate this FAQ:
  • My handset displays „Server not accessible“. What can I do?

    In this status no VoIP calls are possible. Please check the following points:

    • Make sure that the Gigaset is connected to one of the LAN ports of the router and check, if the plug of the network cable are correctly engaged on the Gigaset base station and the router.
    • Make sure that the Gigaset gets an IP address from the router(blue LED illuminates at the base station).
    • Make sure that the router is connected to the internet.

    If all the above criteria has been met, please check the configuration of your VoIP provider. Thereto Start the menu on the handset "Settings" – "Base" - "VoIP Configuration" or open the Web page "Settings" - "Telephony" - "Connections".

    Rate this FAQ:
  • Which format is needed to exchange pictures?

    The Gigaset S68H device supports pictures with Bitmap format (bmp) at a size of 128 x 160 pixel.

    Rate this FAQ:

Gigaset S685 IP - FAQ Topics


  • Answering machine
  • B

  • Bluetooth
  • C

  • Compatibility
  • Call Transfer
  • E

  • E-Mail Notification
  • F

  • Firmware / Update
  • G

  • I

  • Info services
  • Installation / Configuration
  • M

  • Messenger
  • O

  • Operating with (NAT) routers
  • Online Phonebook
  • R

  • Reset procedures
  • Router selection
  • S

  • SMS
  • T

  • Telephone via fixed line