Sıkça Sorulan Soruların
Cevapları

Telefonunuz hakkında bir sorunuz mu var? Burada cevabını bulabilirsiniz. Sadece ürününüzün kategorisini seçin (örn.ISDN telefonlar) ve ilgili ürüne tıklayın. Eğer ürün kategorisini bilmiyorsanız 'Tüm Ürünler' başlığı altından ürününüzü bulabilirsiniz.

Lütfen bir ürün kategorisi ve/veya ürün seçin.


How can I receive e-mail messages from incoming e-mail server?

Your handset can be used to notify you of new e-mail messages on your

POP3/POP3S server and to display the incoming e-mail list and all or

parts of the message text.

 

Prerequisites:

  • Your base is connected to the Internet.
  • You have set up an e-mail account with an ISP.
  • The incoming e-mail server uses the POP3/POP3S protocol
  • You have stored the name of the incoming e-mail server and your personal access data (account name, password) in the phone via the Web configurator.

 

To enable the e-mail notification, open the menu Settings - E-Mail in the Web-Interface and save the access data for your mailbox on the phone:

 

Authentication name:

Enter your username or e-mail account name as agreed with the Internet provider (maximum 74 characters).

Authentication password:

Enter the password agreed with your provider for accessing the POP3/POP3S server (maximum 32 characters; case-sensitive).

POP3 Server:

Enter the name of the POP3/POP3S server (maximum 74 characters).

Example: pop.theserver.com.

POP3 Server port:

Enter the communication port used on the POP3/POP3S server (number between 1 and 55,000).

The default setting is port 110. Enabling the Secure Connection (SSL) function automatically changes the port number to 995.

Check for new e-mail:

Select the time interval from the list at which your phone should check if new messages have arrived via your POP3/POP3S server.

Select Never to disable the check.

Select one of the other values to enable the check for new e-mail messages.

Secure Connection (SSL):

Indicate whether the phone should be authenticated with the POP3S server via a secure connection (POP3S via SSL/TLS).

  • Select Yes to enable the encryption. A prerequisite for successfully establishing a connection to the POP3S server is that a server and a client certificate have been saved on the base station. Enabling this function overwrites the existing port number in POP3 Server port with 995.
  • Clicking on No transfers the access data without encryption.