Service für Gigaset CL660

Gigaset CL660
Willkommen beim Kundenservice für Ihr Gigaset CL660. Auf dieser Seite finden Sie Antworten zu häufig gestellten Fragen. Sowohl Bedienungsanleitungen wie auch Soft- und Firmware stehen zum herunterladen bereit. Ebenfalls finden Sie hier Videotutorials, die Ihnen bei der Einrichtung helfen. Wenn Ihr Produkt einen Defekt aufweist, können Sie Ihr Gigaset CL660 zur Reparatur anmelden. Außerdem finden Sie hier ubehör für Ihr Gigaset CL660. Sollten Sie nach Produkten für Ihr Gigaset CL660 suchen, finden Sie Informationen dazu in unserer Kompatibilitätsdatenbank. Hier finden Sie auch Hilfestellung zum Registrieren Ihres Gigaset CL660 mit anderen Geräten.

Antworten auf häufig gestellte Fragen

Sie haben Fragen zu Ihrem Gigaset Produkt? Hier erhalten Sie Antworten.

Top 10 FAQs

  • First steps for troubleshooting
  • Recommented batteries:

    For Gigaset handsets, use only the batteries approved by Gigaset. The high quality standard guarantees safe use and a long service life.
    NiMh round cells type AAA can be purchased in our Gigaset online shop.

    List of approved and recommended batteries:

      Battery Type  

    Supplier

     
     

    Voltage
    [V]

     
     

    Capacity
    [mA]

     
     

    Supplier 's Type

     
     

    NiMH AAA

     
     

    SHP

     
     

    1,2

     
     

    300

     
     

    44AAAJ300

     
     

    NiMH AAA

     
     

    Suppo

     
     

    1,2

     
     

    300

     
     

    HSY-AAA0.35-C

     
     

    NiMH AAA

     
     

    GP

     
     

    1,2

     
     

    400

     
     

    XSRHCD43C001

     
     

    NiMH AAA

     
     

    SHP

     
     

    1,2

     
     

    400

     
     

    44AAAJ400

     
     

    NiMH AAA

     
     

    Suppo

     
     

    1,2

     
     

    400

     
     

    HSY-AAA0.40-C

     
     

    NiMH AAA

     
     

    GP

     
     

    1,2

     
     

    550

     
     

    XSRHCH53D007

     
     

    NiMH AAA

     
     

    SHP

     
     

    1,2

     
     

    550

     
     

    44AAAJ550

     
     

    NiMH AAA

     
     

    Suppo

     
     

    1,2

     
     

    550

     
     

    HSY-AAA0.55-C

     
     

    NiMH AAA

     
     

    GP

     
     

    1,2

     
     

    650

     
     

    XSRHC073D001

     
     

    NiMH AAA

     
     

    SHP

     
     

    1,2

     
     

    650

     
     

    44AAAJ700

     
     

    NiMH AAA

     
     

    Suppo

     
     

    1,2

     
     

    650

     
     

    HSY-AAA0.65-C

     
      NiMH AAA    

    GP

     
     

    1,2

     
     

    750

     
     

    XSRHCH73D000

     
     

    NiMH AAA

     
     

    SHP

     
     

    1,2

     
     

    750

     
     

    44AAAJ800

     
     

    NiMH AAA

     
     

    Suppo

     
     

    1,2

     
     

    750

     
     

    HSY-AAA0.75-C

     
     

     

     
     

     

     
     

     

     
     

     

     
     

     

     
     

    NiMH AA

     
     

    GP

     
     

    1,2

     
     

    1200

     
     

    GP130AAHCR

     
     

    NiMH AA

     
     

    SHP

     
     

    1,2

     
     

    1200

     
     

    50AAJ1200

     
     

    NiMH AA

     
     

    Suppo

     
     

    1,2

     
     

    1200

     
     

    HSY-AA1.25-C

     

     

     

     

  • By default, the number of the caller is shown in the display of your Gigaset telephone. You do not have to make any other settings on your Gigaset telephone. However, if the caller's number is not displayed, this can be due to the following:

    - You have not ordered CID from your network provider or
    - Your telephone is connected through a PBX that does not transmit all information.

    Is your telephone connected through a PBX/gateway?
    You can establish this by checking for an additional device connected between your telephone and house connection, e.g., a PBX, gateway etc.
    In most cases, simply resetting this device will remedy the situation:
    - Briefly disconnect the power plug of your PBX.
    - Re-insert the plug and wait for the device to restart.

    If the caller number is still not displayed:
    Check the CID settings of your PBX and activate this function if necessary. In the user guide for the device, search for the term "CID" (or an alternative term such as "phone number transmission", "caller ID", ..).

    If necessary, contact the device manufacturer. If this does not resolve the problem, it is possible that your network provider does not support the CID service for this number.

    Have you ordered the CID service from your network provider?
    Check whether your provider supports Caller ID (CID) and that the function has been activated for you. If necessary, contact your provider.

  • If you operate your Gigaset on the telephone connection of a router/modem, make sure that you have noticed the following points:


    • Use the phone cable from the Gigaset packaging.
    • If the router or modem does not have a phone jack, it is necessary to use the enclosed phone cable or the enclosed phone adapter of your router/modem.
    • Connect the cable to the router`s phone jack / phone port / FON port.
    • Please check if your telephone data (internet telephone number, provider-profile, …) for the used telephone connection in the router/modem were entered correctly.
    • Please make sure that your internet connection is working.


    If the problem persists, please contact your provider.

  • With the following procedure all handset settings including the directory, redial list etc. will be deleted!

    • Switch off handset
    • Hold down the keys 1, 4, 7 and switch the handset on
    • "Service" will be displayed
    • Enter 4 6 8 5 4 6 3
    • The handset switches off

  • Fundamental reset of the base station

    • Disconnect mains.
    • Press paging key on base station and hold down.
    • Plug in power supply.
    • Hold key pressed for more than 5 seconds. Release the paging key.

    The base station is now set to factory defaults.
    The system-PIN is reset to 0000 and all handsets are deregistered.

  • Handset in idle mode:

    • Press menu key
    • Enter * # 0 5 #
    • Enter 3 7 6 2 0 0 0

    Afterwards the base system code is 0000.

  • It is practically impossible to determine the battery capacity or state of charge of a NiCd or NiMH battery by fast measurement. For the charge management of the Gigasets, it is only possible to recognize completely empty or completely full (just charged) batteries by the voltage. In most cases, however, the display will show 1/3 or 2/3 because the flat discharge curve, the temperature dependence of the voltage and the different battery types do not allow the charge level to be clearly identified.

  • NiZn (Nickel Zinc) batteries are not suitable for use in Gigaset handsets.

  • To see a picture in the display in addition to the number from an internal caller you have to achieve the following settings:

     

    • At least one picture must be stored in the Media pool from the handset/base (via Gigaset QuickSync)
    • A directory entry must be dedicated to a picture in the directory entry options.
    • The caller must show his number for outgoing calls.
    • The Network provider must support the CLIP function and this function must be activated

    .
    Important Note:

     

    If a handset with picture-CLIP-function is registered to an older base station it could be possible that there is no picture shown in the display due to incompatibility reasons.

     

    In these cases please have a look at our compatibility database and choose your combination to see if it is possible or not.

     

    https://www.gigaset.com/hq/en/cms/PageCustomerServicesCompatibility.html


alle FAQs nach Themen

  • A
  • B
    • Batterie
      • Discharge should take place at room temperature. At temperatures below 0° C, the capacity of the batteries decreases considerably.
        Charging should preferably take place in the range of 10 - 35°C, as this is where the batteries have the greatest capacity.
        With NiMH batteries, the handset interrupts charging at temperatures above 45° C, with LiIon batteries below 5° C and above 40°-45° C, as the batteries must not be charged outside these temperatures.

      • NiZn (Nickel Zinc) batteries are not suitable for use in Gigaset handsets.

      • Recommented batteries:

        For Gigaset handsets, use only the batteries approved by Gigaset. The high quality standard guarantees safe use and a long service life.
        NiMh round cells type AAA can be purchased in our Gigaset online shop.

        List of approved and recommended batteries:

          Battery Type  

        Supplier

         
         

        Voltage
        [V]

         
         

        Capacity
        [mA]

         
         

        Supplier 's Type

         
         

        NiMH AAA

         
         

        SHP

         
         

        1,2

         
         

        300

         
         

        44AAAJ300

         
         

        NiMH AAA

         
         

        Suppo

         
         

        1,2

         
         

        300

         
         

        HSY-AAA0.35-C

         
         

        NiMH AAA

         
         

        GP

         
         

        1,2

         
         

        400

         
         

        XSRHCD43C001

         
         

        NiMH AAA

         
         

        SHP

         
         

        1,2

         
         

        400

         
         

        44AAAJ400

         
         

        NiMH AAA

         
         

        Suppo

         
         

        1,2

         
         

        400

         
         

        HSY-AAA0.40-C

         
         

        NiMH AAA

         
         

        GP

         
         

        1,2

         
         

        550

         
         

        XSRHCH53D007

         
         

        NiMH AAA

         
         

        SHP

         
         

        1,2

         
         

        550

         
         

        44AAAJ550

         
         

        NiMH AAA

         
         

        Suppo

         
         

        1,2

         
         

        550

         
         

        HSY-AAA0.55-C

         
         

        NiMH AAA

         
         

        GP

         
         

        1,2

         
         

        650

         
         

        XSRHC073D001

         
         

        NiMH AAA

         
         

        SHP

         
         

        1,2

         
         

        650

         
         

        44AAAJ700

         
         

        NiMH AAA

         
         

        Suppo

         
         

        1,2

         
         

        650

         
         

        HSY-AAA0.65-C

         
          NiMH AAA    

        GP

         
         

        1,2

         
         

        750

         
         

        XSRHCH73D000

         
         

        NiMH AAA

         
         

        SHP

         
         

        1,2

         
         

        750

         
         

        44AAAJ800

         
         

        NiMH AAA

         
         

        Suppo

         
         

        1,2

         
         

        750

         
         

        HSY-AAA0.75-C

         
         

         

         
         

         

         
         

         

         
         

         

         
         

         

         
         

        NiMH AA

         
         

        GP

         
         

        1,2

         
         

        1200

         
         

        GP130AAHCR

         
         

        NiMH AA

         
         

        SHP

         
         

        1,2

         
         

        1200

         
         

        50AAJ1200

         
         

        NiMH AA

         
         

        Suppo

         
         

        1,2

         
         

        1200

         
         

        HSY-AA1.25-C

         

         

         

         

      • It is practically impossible to determine the battery capacity or state of charge of a NiCd or NiMH battery by fast measurement. For the charge management of the Gigasets, it is only possible to recognize completely empty or completely full (just charged) batteries by the voltage. In most cases, however, the display will show 1/3 or 2/3 because the flat discharge curve, the temperature dependence of the voltage and the different battery types do not allow the charge level to be clearly identified.

  • F
    • First steps for troubleshooting
      • First steps for troubleshooting
      • If you operate your Gigaset on the telephone connection of a router/modem, make sure that you have noticed the following points:


        • Use the phone cable from the Gigaset packaging.
        • If the router or modem does not have a phone jack, it is necessary to use the enclosed phone cable or the enclosed phone adapter of your router/modem.
        • Connect the cable to the router`s phone jack / phone port / FON port.
        • Please check if your telephone data (internet telephone number, provider-profile, …) for the used telephone connection in the router/modem were entered correctly.
        • Please make sure that your internet connection is working.


        If the problem persists, please contact your provider.

  • N
    • Notes on Caller ID (CID)
      • By default, the number of the caller is shown in the display of your Gigaset telephone. You do not have to make any other settings on your Gigaset telephone. However, if the caller's number is not displayed, this can be due to the following:

        - You have not ordered CID from your network provider or
        - Your telephone is connected through a PBX that does not transmit all information.

        Is your telephone connected through a PBX/gateway?
        You can establish this by checking for an additional device connected between your telephone and house connection, e.g., a PBX, gateway etc.
        In most cases, simply resetting this device will remedy the situation:
        - Briefly disconnect the power plug of your PBX.
        - Re-insert the plug and wait for the device to restart.

        If the caller number is still not displayed:
        Check the CID settings of your PBX and activate this function if necessary. In the user guide for the device, search for the term "CID" (or an alternative term such as "phone number transmission", "caller ID", ..).

        If necessary, contact the device manufacturer. If this does not resolve the problem, it is possible that your network provider does not support the CID service for this number.

        Have you ordered the CID service from your network provider?
        Check whether your provider supports Caller ID (CID) and that the function has been activated for you. If necessary, contact your provider.

  • O
    • Operating a Gigaset at routers
      • By default, the number of the caller is shown in the display of your Gigaset telephone. You do not have to make any other settings on your Gigaset telephone. However, if the caller's number is not displayed, this can be due to the following:

        - You have not ordered CID from your network provider or
        - Your telephone is connected through a PBX that does not transmit all information.

        Is your telephone connected through a PBX/gateway?
        You can establish this by checking for an additional device connected between your telephone and house connection, e.g., a PBX, gateway etc.
        In most cases, simply resetting this device will remedy the situation:
        - Briefly disconnect the power plug of your PBX.
        - Re-insert the plug and wait for the device to restart.

        If the caller number is still not displayed:
        Check the CID settings of your PBX and activate this function if necessary. In the user guide for the device, search for the term "CID" (or an alternative term such as "phone number transmission", "caller ID", ..).

        If necessary, contact the device manufacturer. If this does not resolve the problem, it is possible that your network provider does not support the CID service for this number.

        Have you ordered the CID service from your network provider?
        Check whether your provider supports Caller ID (CID) and that the function has been activated for you. If necessary, contact your provider.

      • If you operate your Gigaset on the telephone connection of a router/modem, make sure that you have noticed the following points:


        • Use the phone cable from the Gigaset packaging.
        • If the router or modem does not have a phone jack, it is necessary to use the enclosed phone cable or the enclosed phone adapter of your router/modem.
        • Connect the cable to the router`s phone jack / phone port / FON port.
        • Please check if your telephone data (internet telephone number, provider-profile, …) for the used telephone connection in the router/modem were entered correctly.
        • Please make sure that your internet connection is working.


        If the problem persists, please contact your provider.

  • P
    • Picture CLIP
      • To see a picture in the display in addition to the number from an internal caller you have to achieve the following settings:

         

        • At least one picture must be stored in the Media pool from the handset/base (via Gigaset QuickSync)
        • A directory entry must be dedicated to a picture in the directory entry options.
        • The caller must show his number for outgoing calls.
        • The Network provider must support the CLIP function and this function must be activated

        .
        Important Note:

         

        If a handset with picture-CLIP-function is registered to an older base station it could be possible that there is no picture shown in the display due to incompatibility reasons.

         

        In these cases please have a look at our compatibility database and choose your combination to see if it is possible or not.

         

        https://www.gigaset.com/hq/en/cms/PageCustomerServicesCompatibility.html


  • R
    • Reset Prozedur
      • Handset in idle mode:

        • Press menu key
        • Enter * # 0 5 #
        • Enter 3 7 6 2 0 0 0

        Afterwards the base system code is 0000.

      • Fundamental reset of the base station

        • Disconnect mains.
        • Press paging key on base station and hold down.
        • Plug in power supply.
        • Hold key pressed for more than 5 seconds. Release the paging key.

        The base station is now set to factory defaults.
        The system-PIN is reset to 0000 and all handsets are deregistered.

      • With the following procedure all handset settings including the directory, redial list etc. will be deleted!

        • Switch off handset
        • Hold down the keys 1, 4, 7 and switch the handset on
        • "Service" will be displayed
        • Enter 4 6 8 5 4 6 3
        • The handset switches off

    • Repeater
      •  

         

         

        Please refer to the user guide of your

        phone to check whether your base station is suitable for operating the

        repeater and how to prepare it for registering the repeater.
        Before

        starting registration, position the Gigaset Repeater directly adjacent

        to the base station and to a power connection. If you are already using

        Gigaset Repeaters, these must be switched on and positioned close to the

        base station for this registration procedure.

        Automatic registration
        Carry out the following steps:

        • Switch on Gigaset Repeater: Connect the power supply unit to a plug socket. Following this, the device will enter registration mode for 5 minutes.
        • Prepare the base station for registering the repeater, in the same way as you would to manually register a handset. Please refer to the operating instructions for your base station.

        The repeater will automatically be registered to the

        base station. The LEDs will indicate whether registration was

        successful or unsuccessful.

        Please note: Ensure that no other base stations in registration mode are located close to the Gigaset Repeater during this procedure.

        De-registration

        It

        may be necessary to de-register the repeater, for example if it has to

        be replaced. Information about this can be found in the operating

        instructions of your base station, or via the system menu of your phone

        e.g. C430/C430A, C530/C530A, CL660/CL660A, E630/E630A. For phones

        without a repeater system menu, the repeater can be de-registered using

        the Reset Repeater procedure.

Downloads

Hier erhalten Sie Bedienungsanleitungen und Software-Updates.
Manuals
Firmware
Software
  • QuickSync Version 8.6 (64 bit Version)

    Gigaset QuickSync für Windows

    Gigaset QuickSync zur schnellen und leichten Synchronisation des PC-Adressbuchs mit dem Gigaset Mobilteil oder Tischtelefon.

    NEU: Cloud-Synchronisation mit GoogleTM-Kontakten

    Mit dieser Software lassen sich bequem Ihre Adressdaten von Google™-Kontakten, Microsoft® Outlook®, Windows®-Kontakte (Windows® Vista, Windows® 7 oder Windows® 8) mit dem Gigaset Mobilteil über Bluetooth®, Datenkabel oder Netzwerk (LAN) synchronisieren.

     

    Generelle Informationen 

    Unterstützte Betriebssystemversionen 

    • Windows® Vista (64 bit)
    • Windows® 7 (64 bit)
    • Windows® 8 und 8.1 (64 bit)
    • Windows® 10 (64 bit)

     

     Synchronisation mit folgenden Diensten/Programmen: 

    • Google™ Kontakte (Cloud-Service im Internet)
    • Windows® Kontakte (auf Windows® Vista, Windows® 7 und Windows® 8/8.1 und Windows® 10)
    • Microsoft® Outlook® 2007, 2010, 2013 und 2016 (alle in 32 bit Version)

     

    Leistungsmerkmale der Gigaset QuickSync für Windows® Software: 

    • Schnelle Synchronisation zwischen Ihrem PC Adressbuch und Gigaset Mobilteil oder Tischtelefon
    • Download von Klingeltönen, Screensaver und Picture Clips
    • Unterstützt alle (nicht kopiergeschützte) Musikformate - Midi und Real Sounds (z.B. MP3, AAC, …). Automatische Konvertierung in G.722 Format während des Downloads
    • Klingelton Editor: Wählen Sie, wie viele Sekunden des Titels auf das Mobilteil übertragen werden sollen
    • Bild Editor: Einfache Wahl eines Bildausschnittes, der auf das Mobilteil übertragen werden soll
    • Automatische Bildübertragung aus Outlook® Kontakten ins Adressbuch (nur für SL910H, S820H, S850H, S850HX, SL450H, SL450HX, SL350H, SL360HS, SL390HX, T480HX, CL660HX and S650H PRO, SL750H PRO)

    - Bilder in Outlook® Kontakten werden automatisch mit dem Gigaset Adressbuch verknüpft
    - Verfügbar für Kontaktbilder in Outlook® 2007, 2010, 2013 und 2016 (32 bit Version); bis zu 244 Bilder werden synchronisiert
    - volle Auflösung mit Kontaktbildern ab Outlook® 2010, vorherige Versionen liefern Bilder mit reduzierter Auflösung

    • Unterstützung von mehreren Mobilteilen mit jeweils eigenen Namen

     

    CTI-Funktionalität (Telefonie-Modus):

    • Unterstützung des Windows® Telefonie Interface z.B. zum Wählen direkt aus Outlook® Kontakten
    • Eingehende Gespräche werden am PC angezeigt
    • CTI über Bluetooth für SL910H, S820H, SL78H, SL400H, S800H, S810H, S850H, S850HX, SL450H, SL450HX, SL360HS, T480HX and SL610H PRO, S510H PRO, S650H PRO, SL750H PRO
    • CTI über USB für S79H, CL660H, CL660HX, CL690H, CL690HX und SL350H
    • CTI über Ethernet für DL500A, DX600A ISDN, DX800A all in one, DE700, DE900, DE310 und DE410
    • Bluetooth Verbindungsaufbau integriert in QuickSync Software
    • QuickSync automatisch beim Systemstart ausführen (optional)

     

    Unterstützung von Gigaset SL910H, S820H, SL78H, S79H, S800H, S810H and SL400H, S850H, S850HX, SL450H, SL450HX, SL360HS, SL350H, SL390HX, T480HX, CL660H, CL660HX, CL690H, CL690HX as well as S510H PRO, SL610H PRO and SL750H PRO: 

    • USB-Drivers (WHQL-zertifiziert) für USB-Schnittstelle
    • Synchronisation von bis zu 500 Adressbuch Einträgen
    • Automatische Suche nach neuen Firmware-Versionen (täglich)
    • Handset Firmware-Update (ausschließlich über USB-Verbindung)

     

    Unterstützung von DL500A, DX600A ISDN, DX800A all in one, DE310 IP PRO und DE410 IP PRO:

    • Synchronisation von bis zu 1000 Adressbuch Einträgen (variantenabhängig)
    • Lokale Netzwerkverbindung

     

    Unterstützung von DE700 IP PRO und DE900 IP PRO

    • Synchronisation von zusätzlichen Telefonnummern und Adresseinträgen in Kontakten

     

    Gigaset QuickSync ist kompatibel mit den Gigaset Mobilteilen:

    • Gigaset CL660H, CL660HX, CL690H, CL690HX
    • Gigaset S79H, S810H, S820H, S850H, S850HX
    • Gigaset SL78H, SL910H, SL400H, SL350H, SL360HS, SL390HX, SL450H, SL450HX
    • Gigaset C670H PRO, S510H PRO, S850H PRO, S650H PRO, SL610H PRO, SL750H PRO

     

    Gigaset QuickSync ist kompatibel mit den Gigaset Tischtelefonen:

    • Gigaset DL500A, DX600A ISDN, DX800A all in one, DE700 IP PRO, DE900 IP PRO, DE310 IP PRO, DE410 IP PRO, TX480HX und Maxwell Cordless

     

    Release notes (April 2018) 

    Version 8.6(8.6.876.3)

    • NEU: Unterstützung der Mobilteile Gigaset CL660H und C670H PRO

     

    Release notes (July 2018) 

    Version 8.6(8.6.877.1)

    • NEU: Unterstützung des Gigaset T480HX und Maxwell Cordless
    • NEU: Datenschutzerklärung (EU DSGVO)

     

    Release notes (April 2019) 

    Version 8.6(8.6.878.1)

    • NEU: Unterstützung des Mobilteil Gigaset SL390HX

     

    Release notes (Oktober 2019) 

    Version 8.6(8.6.879.1)

    • NEU: Unterstützung der Mobilteile Gigaset CL690H und CL690HX

    Download
  • QuickSync Version 8.6 (32 bit Version)

    Gigaset QuickSync für Windows

    Gigaset QuickSync zur schnellen und leichten Synchronisation des PC-Adressbuchs mit dem Gigaset Mobilteil oder Tischtelefon.

    NEU: Cloud-Synchronisation mit GoogleTM-Kontakten

    Mit dieser Software lassen sich bequem Ihre Adressdaten von Google™-Kontakten, Microsoft® Outlook®, Windows®-Kontakte (Windows® Vista, Windows® 7 oder Windows® 8) mit dem Gigaset Mobilteil über Bluetooth®, Datenkabel oder Netzwerk (LAN) synchronisieren.

     

    Generelle Informationen 

    Unterstützte Betriebssystemversionen 

    • Windows® Vista (32 bit)
    • Windows® 7 (32 bit)
    • Windows® 8 und 8.1 (32 bit)
    • Windows® 10 (32 bit)

     

     Synchronisation mit folgenden Diensten/Programmen: 

    • Google™ Kontakte (Cloud-Service im Internet)
    • Windows® Kontakte (auf Windows® Vista, Windows® 7 und Windows® 8/8.1 und Windows® 10)
    • Microsoft® Outlook® 2007, 2010, 2013 und 2016 (alle in 32 bit Version)

     

    Leistungsmerkmale der Gigaset QuickSync für Windows® Software: 

    • Schnelle Synchronisation zwischen Ihrem PC Adressbuch und Gigaset Mobilteil oder Tischtelefon
    • Download von Klingeltönen, Screensaver und Picture Clips
    • Unterstützt alle (nicht kopiergeschützte) Musikformate - Midi und Real Sounds (z.B. MP3, AAC, …). Automatische Konvertierung in G.722 Format während des Downloads
    • Klingelton Editor: Wählen Sie, wie viele Sekunden des Titels auf das Mobilteil übertragen werden sollen
    • Bild Editor: Einfache Wahl eines Bildausschnittes, der auf das Mobilteil übertragen werden soll
    • Automatische Bildübertragung aus Outlook® Kontakten ins Adressbuch (nur für SL910H, S820H, S850H, S850HX, SL450H, SL450HX, SL350H, SL360HS, SL390HX, T480HX, CL660HX and S650H PRO, SL750H PRO)

    - Bilder in Outlook® Kontakten werden automatisch mit dem Gigaset Adressbuch verknüpft
    - Verfügbar für Kontaktbilder in Outlook® 2007, 2010, 2013 und 2016 (32 bit Version); bis zu 244 Bilder werden synchronisiert
    - volle Auflösung mit Kontaktbildern ab Outlook® 2010, vorherige Versionen liefern Bilder mit reduzierter Auflösung

    • Unterstützung von mehreren Mobilteilen mit jeweils eigenen Namen

     

    CTI-Funktionalität (Telefonie-Modus):

    • Unterstützung des Windows® Telefonie Interface z.B. zum Wählen direkt aus Outlook® Kontakten
    • Eingehende Gespräche werden am PC angezeigt
    • CTI über Bluetooth für SL910H, S820H, SL78H, SL400H, S800H, S810H, S850H, S850HX, SL450H, SL450HX, SL360HS, T480HX und SL610H PRO, S510H PRO, S650H PRO, SL750H PRO
    • CTI über USB für S79H, CL660H, CL660HX, CL690H, CL690HX und SL350H
    • CTI über Ethernet für DL500A, DX600A ISDN, DX800A all in one, DE700, DE900, DE310 und DE410
    • Bluetooth Verbindungsaufbau integriert in QuickSync Software
    • QuickSync automatisch beim Systemstart ausführen (optional)

     

    Unterstützung von Gigaset SL910H, S820H, SL78H, S79H, S800H, S810H and SL400H, S850H, S850HX, SL450H, SL450HX, SL360HS, SL350H, SL390HX, T480HX, CL660H, CL660HX, CL690H, CL690HX as well as S510H PRO, SL610H PRO and SL750H PRO: 

    • USB-Drivers (WHQL-zertifiziert) für USB-Schnittstelle
    • Synchronisation von bis zu 500 Adressbuch Einträgen
    • Automatische Suche nach neuen Firmware-Versionen (täglich)
    • Handset Firmware-Update (ausschließlich über USB-Verbindung)

     

    Unterstützung von DL500A, DX600A ISDN, DX800A all in one, DE310 IP PRO und DE410 IP PRO:

    • Synchronisation von bis zu 1000 Adressbuch Einträgen (variantenabhängig)
    • Lokale Netzwerkverbindung

     

    Unterstützung von DE700 IP PRO und DE900 IP PRO

    • Synchronisation von zusätzlichen Telefonnummern und Adresseinträgen in Kontakten

     

    Gigaset QuickSync ist kompatibel mit den Gigaset Mobilteilen:

    • Gigaset CL660H, CL660HX, CL690H, CL690HX
    • Gigaset S79H, S810H, S820H, S850H, S850HX
    • Gigaset SL78H, SL910H, SL400H, SL350H, SL360HS, SL390HX, SL450H, SL450HX
    • Gigaset C670H PRO, S510H PRO, S850H PRO, S650H PRO, SL610H PRO, SL750H PRO

     

    Gigaset QuickSync ist kompatibel mit den Gigaset Tischtelefonen:

    • Gigaset DL500A, DX600A ISDN, DX800A all in one, DE700 IP PRO, DE900 IP PRO, DE310 IP PRO, DE410 IP PRO, TX480HX und Maxwell Cordless

     

    Release notes (April 2018) 

    Version 8.6(8.6.876.3)

    • NEU: Unterstützung der Mobilteile Gigaset CL660H and C670H PRO

     

    Release notes (July 2018) 

    Version 8.6(8.6.877.1)

    • NEU: Unterstützung des Gigaset T480HX und Maxwell Cordless
    • NEU: Datenschutzerklärung (EU DSGVO)

     

    Release notes (April 2019) 

    Version 8.6(8.6.878.1)

    • NEU: Unterstützung des Mobilteils Gigaset SL390HX

     

     

    Release notes (Oktober 2019) 

    Version 8.6(8.6.879.1)

    • NEU: Unterstützung der Mobilteile Gigaset CL690H und Gigaset CL690HX

    Download

Mobilteil anmelden

Sie besitzen eine Gigaset CL660 Basisstation und wollen ein Mobilteil anmelden? 
Das Gigaset CL660 mit einem Mobilteil koppeln

Nicht fündig geworden?

Kontaktieren Sie den Gigaset Kundenservice für persönliche Hilfestellung.