Service für Gigaset elements water

Gigaset elements water
Willkommen beim Kundenservice für Ihr Gigaset elements water. Auf dieser Seite finden Sie Antworten zu häufig gestellten Fragen. Sowohl Bedienungsanleitungen wie auch Soft- und Firmware stehen zum herunterladen bereit. Ebenfalls finden Sie hier Videotutorials, die Ihnen bei der Einrichtung helfen. Wenn Ihr Produkt einen Defekt aufweist, können Sie Ihr Gigaset elements water zur Reparatur anmelden. Außerdem finden Sie hier ubehör für Ihr Gigaset elements water. Sollten Sie nach Produkten für Ihr Gigaset elements water suchen, finden Sie Informationen dazu in unserer Kompatibilitätsdatenbank. Hier finden Sie auch Hilfestellung zum Registrieren Ihres Gigaset elements water mit anderen Geräten.

Antworten auf häufig gestellte Fragen

Sie haben Fragen zu Ihrem Gigaset Produkt? Hier erhalten Sie Antworten.

Top 10 FAQs

  • Yes - please use a GP battery and no rechargeable batteries.

  • Please add your probe via Gluepad or Screw behind your dishwaser for example. The silver pins have to show to the front. Now you can add the glue pad to your Sensor and glue it in 1,30 height. The probe need to touch the floor.

  • On some walls, the adhesive pad does not hold and it is better to drill the probe on the wall. The probe can also be drilled or glued directly into the ground. Mainly the silver pins point in the direction you suspect the water.

  • To provide the highest security for your Gigaset elements system and the referring data, the cloud servers are located at a provider in Germany. This host guarantees data security and data privacy under the German data protection law. 

  • The upper sensor is not waterproof, because it has small openings to measure temperature and relative humidity.

  • The wireless sensors are usually in an almost-off mode and only activate the radio channel for a short period of time, for example if data has to be transferred.

    Because of the DECT-ULE standard an insignificant amount of emission occurs within these transfer times, which furthermore lies far below the legal limit of 2 W/kg. 

  • You can receive push notifications on your smartphone or have emails sent to your address. You can also take a look at your smartphone app or log in to your personal section anytime: https://my.gigaset-elements.com 

  • The water was designed for the classic reasons of water damage. For installation behind the dishwasher, behind the washing machine, in the bathroom or kitchen. The water can not be used in outdoor areas.

  • The sensor is designed for temperatures of 0-45 degrees and can measure them.

  • As soon as the water sensor comes into contact with water, the internal buzzer starts to buzz. At the same time an alarm message goes out via the base to your smartphone (and an email if configured). You can then acknowledge the alarm in the app or directly on the sensor by pressing the pairing button.

alle FAQs nach Themen

  • A
    • Allgemein
      • We are currently talking to various insurers and there will be co-operations with various major insurance companies in the future.

      • The upper sensor is not waterproof, because it has small openings to measure temperature and relative humidity.

  • B
    • Batterie
      • Yes - please use a GP battery and no rechargeable batteries.

  • E
    • Elements App
      • If you can´t remember your password, you can simply reset it. You can use the function FORGOT PASSWORD on the login screen:

        In the given field you need to enter the email address that you used to register your Gigaset elements system. Then click on CONTINUE.

        You will get an email containing a link. Follow the instructions to reset your password. Please make sure that your new password is strong enough.

         

  • F
    • Features
      • No, the water is like a smoke detector designed to sound the alarm only in an emergency. If the probe is always in contact with water, the battery will be empty within days.

      • If you want to wipe off moisture for example, you can pause the alarm for 15 minutes with a 2 second click on the pairing button. The break is shown in the app.

      • As soon as the water sensor comes into contact with water, the internal buzzer starts to buzz. At the same time an alarm message goes out via the base to your smartphone (and an email if configured). You can then acknowledge the alarm in the app or directly on the sensor by pressing the pairing button.

      • The sensor is designed for temperatures of 0-45 degrees and can measure them.

      • If you have acknowledged an alarm, no alarm will come until you have dried the sensor. Only then does the water sensor turns around and would report a new water contact.

  • I
    • Installation
      • On some walls, the adhesive pad does not hold and it is better to drill the probe on the wall. The probe can also be drilled or glued directly into the ground. Mainly the silver pins point in the direction you suspect the water.

      • Please add your probe via Gluepad or Screw behind your dishwaser for example. The silver pins have to show to the front. Now you can add the glue pad to your Sensor and glue it in 1,30 height. The probe need to touch the floor.

      • The water was designed for the classic reasons of water damage. For installation behind the dishwasher, behind the washing machine, in the bathroom or kitchen. The water can not be used in outdoor areas.

      • The upper sensor is not waterproof, because it has small openings to measure temperature and relative humidity.

  • P
    • Product information
      • Protection of personal data is of great importance to us. We conduct our activities in compliance with applicable regulations on data privacy protection and data security. We only collect personal data (f.e. name, address, phone number and email address) if they are needed for a contractual relationship or if you make them available by your own choice (e.g. during the registration process).

        Your data is only passed on to third parties, if it is necessary for the purpose of contract execution or billing.

        For the purpose of using your Gigaset elements, datastreams that flow from the sensors via the base station to the Gigaset elements server environment are recorded anonymously so Gigaset Communications GmbH is not able to link certain people to their system use.

        Please also note our detailed rules concerning data protection as well as our terms of use. 

      • The wireless sensors are usually in an almost-off mode and only activate the radio channel for a short period of time, for example if data has to be transferred.

        Because of the DECT-ULE standard an insignificant amount of emission occurs within these transfer times, which furthermore lies far below the legal limit of 2 W/kg. 

      • You can receive push notifications on your smartphone or have emails sent to your address. You can also take a look at your smartphone app or log in to your personal section anytime: https://my.gigaset-elements.com 

      • To provide the highest security for your Gigaset elements system and the referring data, the cloud servers are located at a provider in Germany. This host guarantees data security and data privacy under the German data protection law. 

Downloads

Hier erhalten Sie Bedienungsanleitungen und Software-Updates.

Nicht fündig geworden?

Kontaktieren Sie den Gigaset Kundenservice für persönliche Hilfestellung.