Service für Gigaset SL78H

Gigaset SL78H
Willkommen beim Kundenservice für Ihr Gigaset SL78H. Auf dieser Seite finden Sie Antworten zu häufig gestellten Fragen. Sowohl Bedienungsanleitungen wie auch Soft- und Firmware stehen zum herunterladen bereit. Ebenfalls finden Sie hier Videotutorials, die Ihnen bei der Einrichtung helfen. Wenn Ihr Produkt einen Defekt aufweist, können Sie Ihr Gigaset SL78H zur Reparatur anmelden. Außerdem finden Sie hier ubehör für Ihr Gigaset SL78H. Sollten Sie nach Produkten für Ihr Gigaset SL78H suchen, finden Sie Informationen dazu in unserer Kompatibilitätsdatenbank. Hier finden Sie auch Hilfestellung zum Registrieren Ihres Gigaset SL78H mit anderen Geräten.

Antworten auf häufig gestellte Fragen

Sie haben Fragen zu Ihrem Gigaset Produkt? Hier erhalten Sie Antworten.

Top 10 FAQs

  • First steps for troubleshooting
  • Notes on Caller ID (CID)

    By default, the number of the caller is shown in the display of your Gigaset telephone. You do not have to make any other settings on your Gigaset telephone. However, if the caller's number is not displayed, this can be due to the following:

    - You have not ordered CID from your network provider or
    - Your telephone is connected through a PBX that does not transmit all information.

    Is your telephone connected through a PBX/gateway?
    You can establish this by checking for an additional device connected between your telephone and house connection, e.g., a PBX, gateway etc.
    In most cases, simply resetting this device will remedy the situation:
    - Briefly disconnect the power plug of your PBX.
    - Re-insert the plug and wait for the device to restart.

    If the caller number is still not displayed:
    Check the CID settings of your PBX and activate this function if necessary. In the user guide for the device, search for the term "CID" (or an alternative term such as "phone number transmission", "caller ID", ..).

    If necessary, contact the device manufacturer. If this does not resolve the problem, it is possible that your network provider does not support the CID service for this number.

    Have you ordered the CID service from your network provider?
    Check whether your provider supports Caller ID (CID) and that the function has been activated for you. If necessary, contact your provider.

  • Which batteries should I use for the Gigaset handset?

    Recommented batteries:

    For Gigaset handsets, use only the batteries approved by Gigaset. The high quality standard guarantees safe use and a long service life.
    NiMh round cells type AAA can be purchased in our Gigaset online shop.

  • How can I update the software from my handset?

    To enable your handset to communicate with the PC, the Gigaset QuickSync program must be installed on your PC (free to download at https://www.gigaset.com/hq/en/cms/PageQuickSync.html). 

    The firmware-update of handsets is only supported by Gigaset QuickSync for Windows. The Gigaset QuickSync for MacOS supports only the firmware-update of the SL910H.

     

    Please make sure that you use the USB cable to connect the handset that you want to update, as updating via Bluetooth is not supported!

     

    If your handset is updatable and your PC is connected to the Internet, Gigaset QuickSync will automatically check for new firmware at least once a day, and if it is available it will prompt you to update your handset. You may disable this feature by unchecking the “Check Internet for new firmware and notify if update is available." checkbutton on the Settings - Firmware... page. It can also be disabled via the appropriate checkbox when Gigaset QuickSync prompts you to update your handset.

     

    You can always trigger the facility to check the Internet for new firmware manually:

    • Connect your phone to your PC using a USB data cable.
    • Start the Gigaset QuickSync program on your PC.
    • Establish a connection to your handset.
    • Click in the main menu of QuickSync on Firmware update.

     

    This launches the firmware update. The update process can take up to 10 minutes (not including the download time). Do not interrupt the process or remove the USB data cable. The data is initially loaded from the update server on the Internet. The amount of time this takes is dependent on the speed of your Internet connection.

    The display on your phone is switched off and the message key and the talk key start flashing. Once the update is complete, your phone will automatically restart.

  • How can I transfer the phonebook of the Gigaset SL780 / SL785 to another handset?
  • How can I transfer or receive a phonebook entry as a vCard via Bluetooth?
  • Why isn't there any picture in the display during an incoming call?

    To see a picture in the display in addition to the number from an internal caller you have to achieve the following settings:

     

    • At least one picture must be stored in the Media pool from the handset/base (via Gigaset QuickSync)
    • A directory entry must be dedicated to a picture in the directory entry options.
    • The caller must show his number for outgoing calls.
    • The Network provider must support the CLIP function and this function must be activated

    .
    Important Note:

     

    If a handset with picture-CLIP-function is registered to an older base station it could be possible that there is no picture shown in the display due to incompatibility reasons.

     

    In these cases please have a look at our compatibility database and choose your combination to see if it is possible or not.

     

    https://www.gigaset.com/hq/en/cms/PageCustomerServicesCompatibility.html


  • Details of a phone book entry
     

    You can store up to 500 phonebook entries as type vCard in your handset Gigaset SL78h. Each entry contains the following fields:

    First Name 16 figures
    Surename 16 figures
    Phone (Home) 32 numbers
    Phone (Office) 32 numbers
    Phone (Mobile) 32 numbers
    E-Mail 60 figures
    Anniversary Yes / No
    Caller Melody (VIP-Call) None / Select melody
  • How many entries and numbers can be saved for one directory-entry?
  • What is the relevance for the menu option "Anniversary" in a phonebook entry?

alle FAQs nach Themen

  • A
  • B
    • Bluetooth
      • Bluetooth accessory can not be registered to the Gigaset handset?

        Please check, whether the Bluetooth accessory supports one of the given protocols, which are supported by the Gigaset handset:

         

        headset profile (for Bluetooth headsets)
        handsfree profil (for Bluetooth headsets)
        serial port profile (for PC connection)
        OBject EXchange Profile (OBEX)

         

        When the Bluetooth accessory was installed already, please delete the registration from the handset:

        • Bluetooth Menu
          Known Devices
          Select the accessory, e.g. a headset
          Options
          Delete Entry

         

        If it is again not possible to register the accessory to the handset, please check, whether the accessory supports a reset-function, and execute it.

         

        Please pay attention that perhaps previous settings will be deleted in the accessory.

          

        If you would like to use a headset already registered to another device (e.g., to a mobile phone) with your Gigaset handset, please deactivate this connection before you start the registration process.

         

         

         

      • For which purposes can I use the integrated Bluetooth functionality?
        • Connecting Bluetooth headsets Exchangeing adressbook entries as VCards
        • Receiving adressbook entries from a second Bluetooth device (e.g. mobile, PDA)
        • Sending adressbook entries to a second Bluetooth device (e.g. mobile, PDA)
        • Copying contacts from the PC to the adressbook of the handset using the QuickSync Software

         

        Indications regarding the different functions:

         

        Headset operation:

        An outgoing call will not be transfered to the Bluetooth headset automatically. The connection to the call party has to be initiated as usual using the on-/off hook key at the handset or the handsfree key. Please press the on-/ off-hook key at the Bluetooth headset briefly to transfer the call from the handset to the headset

        The Gigaset handset supports the Bluetooth Headset- and Handsfree Profile. Please make sure your Bluetooth headset supports one of these profiles too.

         

        VCard transfer:

        If you want to receive entries from a mobile phone or an PDA this can lead to problems, if you try to send a block of entries.

        Fotos attached to a VCard entry will not be accepted from the Gigaset handset, due to restricted storage in the handset.

        In some cases it leads to problems, if a foto is assigned to the VCards. In this case the only possibility is to send the entry without foto.

      • How many Bluetooth devices can be managed by the Gigaset?

        You can register 1 Bluetooth headset to

        the handset. You can also register up to 5 data devices (PC, PDA) to send and receive directory entries as vCards or exchange data with the computer.

      • How many entries can be sent/received?

        You're able to send/receive up to 500

        entries as VCard format.

      • How to connect a Gigaset handset with the PC using a Bluetooth connection?

        The connection between you PC and the Gigaset handset depents in your Bluetooth device at the PC.

        To get a connection to the Gigaset it is necessary to activate the Bluetooth function at the handset.

        To that it is necessary to disconnect all cables from the handset and also not to charge the device in the charging cradle while you want to work with Bluetooth.

        You next have to pair your Gigaset handset with your PC. To do that start you Bluetooth software at your PC and search for new Bluetooth devices. The Gigaset will be shown, preconditioned it is in the radio radius of max. 10 meters to your PC.

        After the PC has found the handset you have to enter an security code. As a rule you get several possibilities for the security code. Please select the on which offers you to enter the code manually. Then enter a code, like 0000.

        Right now a window appears in the handset which prompts you to enter the code. Please enter here the same code as you selected before: 0000

        The pairing now has finished.

      • Is is possible to update via Bluetooth?

        Updating via Bluetooth is not supported. Please connect the handset to your PC using an USB data cable.

      • Is it possible to send/exchange VCards in combination with a picture?

        If you want to transfer an directory /

        phone book entry with VCard format from a mobile phone to you Gigaset handset, this basicly is possible. A foto stored to the entry in the mobile phone will not be transfered to the Gigaset, due to limited storage in the Gigaset handset.

      • Is it possible to use Bluetooth and the USB data cable simultaneously?

        If Bluetooth is activated and the supplied USB data cable is plugged into the connection socket, Bluetooth is automatically deactivated.

        If a Bluetooth voice connection has already been established, Bluetooth is not deactivated until this connection is deactivated.

        If a Bluetooth data connection has already been established, the response depends on the receiving device.

        Bluetooth is automatically reactivated when the USB data cable is removed.

        If Bluetooth is deactivated and the USB data cable is plugged in, Bluetooth cannot be activated.

      • Is it possible to use Bluetooth and the USB data cable simultaneously?

        If Bluetooth is activated and the supplied USB data cable is plugged into the connection socket, Bluetooth is automatically deactivated.

        If a Bluetooth voice connection has already been established, Bluetooth is not deactivated until this connection is deactivated.

        If a Bluetooth data connection has already been established, the response depends on the receiving device.

        Bluetooth is automatically reactivated when the USB data cable is removed.

        If Bluetooth is deactivated and the USB data cable is plugged in, Bluetooth cannot be activated.

      • The same Bluetooth accessory can not be registered again to the Gigaset handset?
        • Please deregister other devices which were possibly registered to the handset before.
        • - Bluetooth Menu
          - Known Devices
          - Select the accessory, e.g. a headset 
          - Options
          - Delete Entry

         

        If it is again not possible to register the accessory to the handset, please check, whether the accessory supports a reset-function, and execute it. Please pay attention that perhaps previous settings will be deleted in the accessory.

      • What has to be noticed in case of an incoming call?

        An incoming call will also be signalized at the Bluetooth headset and can immediately be accepted by pressing the 'Accept button' (see manual of your Bluetooth headset producer).

        If you accept the call with your Gigaset device, and afterwards want to transfer the call to your headset, you also just need to press the accept button at your headset. In this case, the transfer of the call could take between 3 and 5 seconds.

        Within this period you should avoid to press the accept button twice, because you possibly could hang up the call.

      • What has to be noticed in case of an outgoing call?

        Continuing a call on a Bluetooth headset

         

        Precondition for continuing a call on a Bluetooth headset:

         

        Bluetooth is activated and a connection has been established between the Bluetooth headset and the handset. Dial procedure was initiated by Gigaset handset.

        Press the talk key on the Bluetooth headset. It may take up to 5 seconds to establish a connection to the handset.

         

        For further details about your headset, see the user guide issued with it.

      • Which Bluetooth headsets are recommended?

        Whether Bluetooth® devices can communication with each other is a profile question. It is important that they support and use the same Bluetooth® profile for different functions.

        The Gigaset supports the Headset Profile and Handsfree Bluetooth profil for communication with a headset. 

        You can operate headsets on your handset that have the Headset or Handsfree profile. If both profiles are available, the handsfree profile is used to communicate.

        Known BT-Headsets that do not work correctly with S810H, S820H and SL400H:
        - Jabra Wave BT 3.0 (100-93050000-60)

         

         

      • Which Bluetooth profiles are supported by the SL78H / SL400H / S810H / S820H / S850H / SL910H handset?

        Whether Bluetooth® devices can communication with each other is a profile question. It is important that they support and use the same Bluetooth® profile for different functions.

        The Gigaset SL78H / SL400H / S810H / S820H / S850H / SL910H handsets are working with the Bluetooth® 2.1 standard  and support the following profiles:

        Serial Port Profile (SPP) for data communication with a PC.
        Headset Profile (HSP) and Handsfree Profile (HFP) for communication with a headset.
        OBject EXchange Profile (OBEX) for the transfer of address book entries (vCards).

        Known BT-Headsets, that do not work correctly with S810H, S820H and SL400H:
        - Jabra Wave BT 3.0 (100-93050000-60)

         

         

    • Batterie
      • Which batteries should I use for the Gigaset handset?

        Recommented batteries:

        For Gigaset handsets, use only the batteries approved by Gigaset. The high quality standard guarantees safe use and a long service life.
        NiMh round cells type AAA can be purchased in our Gigaset online shop.

  • C
  • D
    • Date & Time
      • Why is the time incorrectly shown and why does it change automatically?

        Our Gigaset systems AL180/185, A

        S 280/285, A 580/585, C380/385, SL 780/785 take over the date and time during a CLIP message automatically.

        The transmission from the date and time is carried out by e.g Router, Modems, PABX or switchboards, depending on the manufacturer. In some cases it could happen that a wrong date and time was transfered.

         


        You can switch off the automatically take over from date and time:

        For all bases Gigaset AL180/280/185/285 ; AS 280/285 ; A 380/385 ; A 580/585 ; C 380/385

            * Press menukey
            * Select Settings
            * Select Base
            * Enter 94762001
            * The display shows : "Eeprom"
            * Now enter the following figures
            * Figures for bases
                  o  with answering machine: 49325 49372 32796 and press OK
                  o  ohne without answering machine: 02130 02075 18651  and press OK
            * After entering OK you will see "Saved" in the display.
            * Unplug and plug the power supply after this procedure.



        For all basesGigaset SL780/785

            * Press menukey
            * Enter * # 05 #
            * You will see " System 9" in the display
            * Enter 4762001
            * You will see "Eeprom" in the display
            * Now enter the following figures
            * Figures for bases
                  o  witht answering machine: 12708 12303 12556 und OK drücken
                  o  without answering machine: 30893 30915 31168  und OK drücken
            * After entering OK you will see "Saved" in the display.
            * Unplug and plug the power supply after this procedure.

    • Display
  • F
    • Firmware / Update
      • How can I update the software from my handset?

        To enable your handset to communicate with the PC, the Gigaset QuickSync program must be installed on your PC (free to download at https://www.gigaset.com/hq/en/cms/PageQuickSync.html). 

        The firmware-update of handsets is only supported by Gigaset QuickSync for Windows. The Gigaset QuickSync for MacOS supports only the firmware-update of the SL910H.

         

        Please make sure that you use the USB cable to connect the handset that you want to update, as updating via Bluetooth is not supported!

         

        If your handset is updatable and your PC is connected to the Internet, Gigaset QuickSync will automatically check for new firmware at least once a day, and if it is available it will prompt you to update your handset. You may disable this feature by unchecking the “Check Internet for new firmware and notify if update is available." checkbutton on the Settings - Firmware... page. It can also be disabled via the appropriate checkbox when Gigaset QuickSync prompts you to update your handset.

         

        You can always trigger the facility to check the Internet for new firmware manually:

        • Connect your phone to your PC using a USB data cable.
        • Start the Gigaset QuickSync program on your PC.
        • Establish a connection to your handset.
        • Click in the main menu of QuickSync on Firmware update.

         

        This launches the firmware update. The update process can take up to 10 minutes (not including the download time). Do not interrupt the process or remove the USB data cable. The data is initially loaded from the update server on the Internet. The amount of time this takes is dependent on the speed of your Internet connection.

        The display on your phone is switched off and the message key and the talk key start flashing. Once the update is complete, your phone will automatically restart.

      • Is it possible to update the handset via a bluetooth connection?

        It is not possible to update the handset firmware via a bluetooth connection.

        If you want to update your handset you need to connect the handset via a standard USB data cable with a USB mini-B connector with your PC.

         

        To enable your handset to communicate with the PC, the "Gigaset QuickSync" program must be installed on your PC (free to download HERE.)


        Completing a firmware update:

        • Connect your phone to your PC using a USBdatacable.
        • Start the "Gigaset QuickSync" program on your PC.
        • Establish a connection to your handset.
        • Select [Settings]  →[Device properties]to open the [Device] tab.
        • Click on [Firmware update].

         

        This launches the firmware update.

        The update process can take up to 10 min-utes (not including the download time).

        Do not interrupt the process or remove the USB data cable.

        The data is initially loaded from the update server on the Internet. The amount of time this takes is dependent on the speed of your Internet connection. .

        The display on your phone is switched off and the message key and the talk key start flashing.

        Once the update is complete, your phone will automatically restart. 


         

         

      • New Software for SL78H available

         

        Changes with the new version:

        • Text info screen added (for backlight activation).
        • Bug fixing in SMS editor.
        • Turkish/Russian/Serbian Display texts corrected
        • Bluetooth headset compatibility improved.
        • Ringer melodies behind multiline base stations improved (e.g. DX600A ISDN)



         

         

      • What can I do if the handsfree key and the message key are flashing?
      • What can I do if the update from the handset was interrupted?
    • First steps for troubleshooting
  • N
    • Notes on Caller ID (CID)
      • Notes on Caller ID (CID)

        By default, the number of the caller is shown in the display of your Gigaset telephone. You do not have to make any other settings on your Gigaset telephone. However, if the caller's number is not displayed, this can be due to the following:

        - You have not ordered CID from your network provider or
        - Your telephone is connected through a PBX that does not transmit all information.

        Is your telephone connected through a PBX/gateway?
        You can establish this by checking for an additional device connected between your telephone and house connection, e.g., a PBX, gateway etc.
        In most cases, simply resetting this device will remedy the situation:
        - Briefly disconnect the power plug of your PBX.
        - Re-insert the plug and wait for the device to restart.

        If the caller number is still not displayed:
        Check the CID settings of your PBX and activate this function if necessary. In the user guide for the device, search for the term "CID" (or an alternative term such as "phone number transmission", "caller ID", ..).

        If necessary, contact the device manufacturer. If this does not resolve the problem, it is possible that your network provider does not support the CID service for this number.

        Have you ordered the CID service from your network provider?
        Check whether your provider supports Caller ID (CID) and that the function has been activated for you. If necessary, contact your provider.

  • P
    • Picture CLIP
      • Why isn't there any picture in the display during an incoming call?

        To see a picture in the display in addition to the number from an internal caller you have to achieve the following settings:

         

        • At least one picture must be stored in the Media pool from the handset/base (via Gigaset QuickSync)
        • A directory entry must be dedicated to a picture in the directory entry options.
        • The caller must show his number for outgoing calls.
        • The Network provider must support the CLIP function and this function must be activated

        .
        Important Note:

         

        If a handset with picture-CLIP-function is registered to an older base station it could be possible that there is no picture shown in the display due to incompatibility reasons.

         

        In these cases please have a look at our compatibility database and choose your combination to see if it is possible or not.

         

        https://www.gigaset.com/hq/en/cms/PageCustomerServicesCompatibility.html


  • R
  • S
    • Software update
      • How can I update the software from my handset?

        To enable your handset to communicate with the PC, the Gigaset QuickSync program must be installed on your PC (free to download at https://www.gigaset.com/hq/en/cms/PageQuickSync.html). 

        The firmware-update of handsets is only supported by Gigaset QuickSync for Windows. The Gigaset QuickSync for MacOS supports only the firmware-update of the SL910H.

         

        Please make sure that you use the USB cable to connect the handset that you want to update, as updating via Bluetooth is not supported!

         

        If your handset is updatable and your PC is connected to the Internet, Gigaset QuickSync will automatically check for new firmware at least once a day, and if it is available it will prompt you to update your handset. You may disable this feature by unchecking the “Check Internet for new firmware and notify if update is available." checkbutton on the Settings - Firmware... page. It can also be disabled via the appropriate checkbox when Gigaset QuickSync prompts you to update your handset.

         

        You can always trigger the facility to check the Internet for new firmware manually:

        • Connect your phone to your PC using a USB data cable.
        • Start the Gigaset QuickSync program on your PC.
        • Establish a connection to your handset.
        • Click in the main menu of QuickSync on Firmware update.

         

        This launches the firmware update. The update process can take up to 10 minutes (not including the download time). Do not interrupt the process or remove the USB data cable. The data is initially loaded from the update server on the Internet. The amount of time this takes is dependent on the speed of your Internet connection.

        The display on your phone is switched off and the message key and the talk key start flashing. Once the update is complete, your phone will automatically restart.

  • T

Downloads

Hier erhalten Sie Bedienungsanleitungen und Software-Updates.
Manuals
  • Gigaset SL78H Bedienungsanleitung (Langversion) de AT

Firmware
Software
  • QuickSync Version 4.0 (Mac OS 10.9 - 10.13 High Sierra)

    Gigaset QuickSync für Mac

    Mit dieser Software lassen sich bequem Ihre Adressdaten von den Mac OS Kontakten mit dem Gigaset Mobilteil über Bluetooth®, Datenkabel oder Netzwerk (LAN) synchronisieren (je nach unterstütztem Gerätetyp stehen ein oder mehrere Verbindungsmöglichkeiten zur Verfügung).

     

    Generelle Informationen 

    Unterstützte Betriebssystemversionen:

    • Mac OS X 10.13 High Sierra, 10.12 Sierra, 10.11 El Capitan, 10.10 Yosemite, 10.9 Mavericks

     

    Leistungsmerkmale der Gigaset QuickSync Software für Mac: 

    • Synchronisation zwischen Ihrem Mac Adressbuch (inkl. iCloud) und unterstützten Gigaset Geräten
    • Download von Klingeltönen, Screensavern und Picture Clips
    • Unterstützt alle Quicktime Musikformate - Automatische Konvertierung in G.722 Format während des Downloads
    • Klingelton-Editor: Wählen Sie, wie viele Sekunden des Titels auf das Mobilteil übertragen werden sollen
    • Automatische Bildübertragung aus dem Mac Adressbuch (nur für SL910 und S820)

     

    Wählen von Telefonnummern über ein verbundenes Gigaset Telefon:

    • Wählen sie eine Telefonnummer in einem Programm (z.B. Safari) aus und starten Sie den Wählvorgang über das Kontextmenü
    • Das ausgewählte Telefon wählt die ausgewählte Nummer in Freisprechbetrieb
    • (Das Kontextmenü muss in den Systemeinstellungen->Tastatur->Kurzbefehle->Dienste aktiviert sein)
    • Unterstützung von mehreren Mobilteilen mit jeweils eigenen Namen

     

    Gigaset QuickSync ist kompatibel mit den Gigaset Mobilteilen: 

    • Gigaset CL660HX, SL785, SL780, SL78H, SL565, SL560, SL56, SL400, SL400A, SL400H, SL375, SL370, SL37H, S810, S810A, S810H, S800, S800A, S800H, S820, S820A, S820H, S850H, S850HX, SL350, SL360HS, SL450H, SL450HX, SL910, SL910A, SL910H, S790, S795, S79H, SX790 ISDN, SX795 ISDN, S685, S680, SX685 isdn, SX680 isdn, S685 IP, S68H, S510H PRO, S650H PRO, SL610H PRO und SL750H PRO.

     

    Gigaset QuickSync ist kompatibel mit den Gigaset Tischtelefonen:

    • Gigaset DL500A, DX600A ISDN, DX800A all in one, DE310, DE410, DE700, DE900 IP PRO

     

    Release Notes (April 2018)

    Version 4.0

    • NEU: Mac OS 10.13 High Sierra support (64 bit System)

     

    Download
  • QuickSync Version 8.6 (64 bit Version)

    Gigaset QuickSync für Windows

    Gigaset QuickSync zur schnellen und leichten Synchronisation des PC-Adressbuchs mit dem Gigaset Mobilteil oder Tischtelefon.

    NEU: Cloud-Synchronisation mit GoogleTM-Kontakten

    Mit dieser Software lassen sich bequem Ihre Adressdaten von Google™-Kontakten, Microsoft® Outlook®, Windows®-Kontakte (Windows® Vista, Windows® 7 oder Windows® 8) mit dem Gigaset Mobilteil über Bluetooth®, Datenkabel oder Netzwerk (LAN) synchronisieren.

     

    Generelle Informationen 

    Unterstützte Betriebssystemversionen 

    • Windows® Vista (64 bit)
    • Windows® 7 (64 bit)
    • Windows® 8 und 8.1 (64 bit)
    • Windows® 10 (64 bit)

     

     Synchronisation mit folgenden Diensten/Programmen: 

    • Google™ Kontakte (Cloud-Service im Internet)
    • Windows® Kontakte (auf Windows® Vista, Windows® 7 und Windows® 8/8.1 und Windows® 10)
    • Microsoft® Outlook® 2007, 2010, 2013 und 2016 (alle in 32 bit Version)

     

    Leistungsmerkmale der Gigaset QuickSync für Windows® Software: 

    • Schnelle Synchronisation zwischen Ihrem PC Adressbuch und Gigaset Mobilteil oder Tischtelefon
    • Download von Klingeltönen, Screensaver und Picture Clips
    • Unterstützt alle (nicht kopiergeschützte) Musikformate - Midi und Real Sounds (z.B. MP3, AAC, …). Automatische Konvertierung in G.722 Format während des Downloads
    • Klingelton Editor: Wählen Sie, wie viele Sekunden des Titels auf das Mobilteil übertragen werden sollen
    • Bild Editor: Einfache Wahl eines Bildausschnittes, der auf das Mobilteil übertragen werden soll
    • Automatische Bildübertragung aus Outlook® Kontakten ins Adressbuch (nur für SL910, S820, S850H, S850HX, SL450H, SL450HX, SL350H, SL360HS, CL660HX und S650H PRO, SL750H PRO)
    • Bilder in Outlook® Kontakten werden automatisch mit dem Gigaset Adressbuch verknüpft
    • Verfügbar für Kontaktbilder in Outlook® 2007, 2010, 2013 und 2016 (32 bit Version); bis zu 244 Bilder werden synchronisiert
    • volle Auflösung mit Kontaktbildern ab Outlook® 2010, vorherige Versionen liefern Bilder mit reduzierter Auflösung
    • Unterstützung von mehreren Mobilteilen mit jeweils eigenen Namen

     

    CTI-Funktionalität (Telefonie-Modus):

    • Unterstützung des Windows® Telefonie Interface z.B. zum Wählen direkt aus Outlook® Kontakten
    • Eingehende Gespräche werden am PC angezeigt
    • CTI über Bluetooth für SL910H, S820H, SL78H, SL400H, S800H, S810H, S850H, S850HX, SL450H, SL450HX, SL360HS und SL610H PRO, S510H PRO, S650H PRO, SL750H PRO
    • CTI über USB für S79H, CL660H, CL660HX und SL350H
    • CTI über Ethernet für DL500A, DX600A ISDN, DX800A all in one, DE700, DE900, DE310 und DE410
    • Bluetooth Verbindungsaufbau integriert in QuickSync Software
    • QuickSync automatisch beim Systemstart ausführen (optional)

     

    Unterstützung von Gigaset SL910H, S820H, SL78H, S79H, S800H, S810H, SL400H, S850H, S850HX, SL450H, SL450HX, SL360HS, SL350H, CL660H, CL660HX und S510H PRO, SL610H PRO und SL750H PRO: 

    • USB-Drivers (WHQL-zertifiziert) für USB-Schnittstelle
    • Synchronisation von bis zu 500 Adressbuch Einträgen
    • Automatische Suche nach neuen Firmware-Versionen (täglich)
    • Handset Firmware-Update (ausschließlich über USB-Verbindung)

     

    Unterstützung von DL500A, DX600A ISDN, DX800A all in one, DE310 IP PRO und DE410 IP PRO:

    • Synchronisation von bis zu 1000 Adressbuch Einträgen (variantenabhängig)
    • Lokale Netzwerkverbindung

     

    Unterstützung von DE700 IP PRO und DE900 IP PRO

    • Synchronisation von zusätzlichen Telefonnummern und Adresseinträgen in Kontakten

     

    Gigaset QuickSync ist kompatibel mit den Gigaset Mobilteilen:

    • Gigaset C670H PRO, CL660H, CL660HX
    • Gigaset S850H, S850HX, SL450H, SL450HX, SL360HS
    • Gigaset SL910, SL910A, SL910H, S820, S820A, S820H, SL400, SL400A, SL400H, SL350H
    • Gigaset SX810ISDN, SX810A ISDN, S810H, SX790ISDN, SX790A ISDN
    • Gigaset SL610H PRO, S510H PRO, S650H PRO, SL750H PRO
    • Gigaset SL785, SL780, SL78H,  S795, S790, S79H, S850H

     

    Gigaset QuickSync ist kompatibel mit den Gigaset Tischtelefonen:

    • Gigaset DL500A, DX600A ISDN, DX800A all in one, DE700 IP PRO, DE900 IP PRO, DE310 IP PRO, DE410 IP PRO, TX480HX und Maxwell Cordless

     

    Release notes (April 2018) 

    Version 8.6(8.6.876.3)

    • NEU: Unterstützung der Mobilteile Gigaset CL660H, C670H PRO, Swyx D710 and Swyx D750

     

    Release notes (July 2018) 

    Version 8.6(8.6.877.1)

    • NEU: Unterstützung der Gigaset T480HX und Maxwell Cordless
    • NEU: Datenschutzerklärung (EU DSGVO)
    Download
  • QuickSync Version 8.6 (32 bit Version)

    Gigaset QuickSync für Windows

    Gigaset QuickSync zur schnellen und leichten Synchronisation des PC-Adressbuchs mit dem Gigaset Mobilteil oder Tischtelefon.

    NEU: Cloud-Synchronisation mit GoogleTM-Kontakten

    Mit dieser Software lassen sich bequem Ihre Adressdaten von Google™-Kontakten, Microsoft® Outlook®, Windows®-Kontakte (Windows® Vista, Windows® 7 oder Windows® 8) mit dem Gigaset Mobilteil über Bluetooth®, Datenkabel oder Netzwerk (LAN) synchronisieren.

     

    Generelle Informationen 

    Unterstützte Betriebssystemversionen 

    • Windows® Vista (32 bit)
    • Windows® 7 (32 bit)
    • Windows® 8 und 8.1 (32 bit)
    • Windows® 10 (32 bit)

     

     Synchronisation mit folgenden Diensten/Programmen: 

    • Google™ Kontakte (Cloud-Service im Internet)
    • Windows® Kontakte (auf Windows® Vista, Windows® 7 und Windows® 8/8.1 und Windows® 10)
    • Microsoft® Outlook® 2007, 2010, 2013 und 2016 (alle in 32 bit Version)

     

    Leistungsmerkmale der Gigaset QuickSync für Windows® Software: 

    • Schnelle Synchronisation zwischen Ihrem PC Adressbuch und Gigaset Mobilteil oder Tischtelefon
    • Download von Klingeltönen, Screensaver und Picture Clips
    • Unterstützt alle (nicht kopiergeschützte) Musikformate - Midi und Real Sounds (z.B. MP3, AAC, …). Automatische Konvertierung in G.722 Format während des Downloads
    • Klingelton Editor: Wählen Sie, wie viele Sekunden des Titels auf das Mobilteil übertragen werden sollen
    • Bild Editor: Einfache Wahl eines Bildausschnittes, der auf das Mobilteil übertragen werden soll
    • Automatische Bildübertragung aus Outlook® Kontakten ins Adressbuch (nur für SL910, S820, S850H, S850HX, SL450H, SL450HX, SL350H, SL360HS, CL660HX und S650H PRO, SL750H PRO)
    • Bilder in Outlook® Kontakten werden automatisch mit dem Gigaset Adressbuch verknüpft
    • Verfügbar für Kontaktbilder in Outlook® 2007, 2010, 2013 und 2016 (32 bit Version); bis zu 244 Bilder werden synchronisiert
    • volle Auflösung mit Kontaktbildern ab Outlook® 2010, vorherige Versionen liefern Bilder mit reduzierter Auflösung
    • Unterstützung von mehreren Mobilteilen mit jeweils eigenen Namen

     

    CTI-Funktionalität (Telefonie-Modus):

    • Unterstützung des Windows® Telefonie Interface z.B. zum Wählen direkt aus Outlook® Kontakten
    • Eingehende Gespräche werden am PC angezeigt
    • CTI über Bluetooth für SL910H, S820H, SL78H, SL400H, S800H, S810H, S850H, S850HX, SL450H, SL450HX, SL360HS und SL610H PRO, S510H PRO, S650H PRO, SL750H PRO
    • CTI über USB für S79H, CL660H, CL660HX und SL350H
    • CTI über Ethernet für DL500A, DX600A ISDN, DX800A all in one, DE700, DE900, DE310 und DE410
    • Bluetooth Verbindungsaufbau integriert in QuickSync Software
    • QuickSync automatisch beim Systemstart ausführen (optional)

     

    Unterstützung von Gigaset SL910H, S820H, SL78H, S79H, S800H, S810H, SL400H, S850H, S850HX, SL450H, SL450HX, SL360HS, SL350H, CL660H, CL660HX und S510H PRO, SL610H PRO und SL750H PRO: 

    • USB-Drivers (WHQL-zertifiziert) für USB-Schnittstelle
    • Synchronisation von bis zu 500 Adressbuch Einträgen
    • Automatische Suche nach neuen Firmware-Versionen (täglich)
    • Handset Firmware-Update (ausschließlich über USB-Verbindung)

     

    Unterstützung von DL500A, DX600A ISDN, DX800A all in one, DE310 IP PRO und DE410 IP PRO:

    • Synchronisation von bis zu 1000 Adressbuch Einträgen (variantenabhängig)
    • Lokale Netzwerkverbindung

     

    Unterstützung von DE700 IP PRO und DE900 IP PRO

    • Synchronisation von zusätzlichen Telefonnummern und Adresseinträgen in Kontakten

     

    Gigaset QuickSync ist kompatibel mit den Gigaset Mobilteilen:

    • Gigaset C670H PRO, CL660H, CL660HX
    • Gigaset S850H, S850HX, SL450H, SL450HX, SL360HS
    • Gigaset SL910, SL910A, SL910H, S820, S820A, S820H, SL400, SL400A, SL400H, SL350H
    • Gigaset SX810ISDN, SX810A ISDN, S810H, SX790ISDN, SX790A ISDN
    • Gigaset SL610H PRO, S510H PRO, S650H PRO, SL750H PRO
    • Gigaset SL785, SL780, SL78H,  S795, S790, S79H, S850H

     

    Gigaset QuickSync ist kompatibel mit den Gigaset Tischtelefonen:

    • Gigaset DL500A, DX600A ISDN, DX800A all in one, DE700 IP PRO, DE900 IP PRO, DE310 IP PRO, DE410 IP PRO, TX480HX und Maxwell Cordless

     

    Release notes (April 2018) 

    Version 8.6(8.6.876.3)

    • NEU: Unterstützung der Mobilteile Gigaset CL660H, C670H PRO, Swyx D710 and Swyx D750

     

    Release notes (July 2018) 

    Version 8.6(8.6.877.1)

    • NEU: Unterstützung der Gigaset T480HX und Maxwell Cordless
    • NEU: Datenschutzerklärung (EU DSGVO)
    Download
  • QuickSync Version 3.6 (Mac OS 10.7 - 10.12 Sierra)

    Gigaset QuickSync für Mac

    Mit dieser Software lassen sich bequem Ihre Adressdaten von den Mac OS Kontakten mit dem Gigaset Mobilteil über Bluetooth®, Datenkabel oder Netzwerk (LAN) synchronisieren (je nach unterstütztem Gerätetyp stehen ein oder mehrere Verbindungsmöglichkeiten zur Verfügung).

     

    Generelle Informationen 

    Unterstützte Betriebssystemversionen:  

    • Mac OS X 10.11 El Capitan, 10.10 Yosemite, 10.9, 10.8, 10.7

     

    Leistungsmerkmale der Gigaset QuickSync Software für Mac: 

    • Synchronisation zwischen Ihrem Mac Adressbuch (inkl. iCloud) und unterstützten Gigaset Geräten
    • Download von Klingeltönen, Screensavern und Picture Clips
    • Unterstützt alle Quicktime Musikformate - Automatische Konvertierung in G.722 Format während des Downloads
    • Klingelton-Editor: Wählen Sie, wie viele Sekunden des Titels auf das Mobilteil übertragen werden sollen
    • Automatische Bildübertragung aus dem Mac Adressbuch (nur für SL910 und S820)

     

    Wählen von Telefonnummern über ein verbundenes Gigaset Telefon:

    • Wählen sie eine Telefonnummer in einem Programm (z.B. Safari) aus und starten Sie den Wählvorgang über das Kontextmenü
    • Das ausgewählte Telefon wählt die ausgewählte Nummer in Freisprechbetrieb
    • (Das Kontextmenü muss in den Systemeinstellungen->Tastatur->Kurzbefehle->Dienste aktiviert sein)
    • Unterstützung von mehreren Mobilteilen mit jeweils eigenen Namen

     

    Gigaset QuickSync ist kompatibel mit den Gigaset Mobilteilen: 

    • Gigaset CL660HX, SL785, SL780, SL78H, SL565, SL560, SL56, SL400, SL400A, SL400H, SL375, SL370, SL37H, S810, S810A, S810H, S800, S800A, S800H, S820, S820A, S820H, S850H, S850HX, SL350, SL360HS, SL450H, SL450HX, SL910, SL910A, SL910H, S790, S795, S79H, SX790 ISDN, SX795 ISDN, S685, S680, SX685 isdn, SX680 isdn, S685 IP, S68H, S510H PRO, S650H PRO, SL610H PRO und SL750H PRO.

     

    Gigaset QuickSync ist kompatibel mit den Gigaset Tischtelefonen:

    • Gigaset DL500A, DX600A ISDN, DX800A all in one, DE310, DE410, DE700, DE900 IP PRO

     

    Release Notes (November 2016)

    Version 3.6

    • Mac OS 10.12 Sierra Support
    Download
  • QuickSync Version 3.0.2 (Mac OS 10.5 - 10.9)

    Gigaset QuickSync für Mac

    Mit dieser Software lassen sich bequem Ihre Adressdaten von den Mac OS Kontakten mit dem Gigaset Mobilteil über Bluetooth®, Datenkabel oder Netzwerk (LAN) synchronisieren (je nach unterstütztem Gerätetyp stehen ein oder mehrere Verbindungsmöglichkeiten zur Verfügung).

     

    Generelle Informationen 

    Unterstützte Betriebssystemversionen:  

    • Mac OS 10.9, 10.8, 10.7, 10.6, 10.5

     

    Leistungsmerkmale der Gigaset QuickSync Software für Mac: 

    • Synchronisation zwischen Ihrem Mac Adressbuch (inkl. iCloud) und unterstützten Gigaset Geräten
    • Download von Klingeltönen, Screensavern und Picture Clips
    • Unterstützt alle Quicktime Musikformate - Automatische Konvertierung in G.722 Format während des Downloads
    • Klingelton-Editor: Wählen Sie, wie viele Sekunden des Titels auf das Mobilteil übertragen werden sollen
    • Automatische Bildübertragung aus dem Mac Adressbuch (nur für SL910 und S820)

     

    Wählen von Telefonnummern über ein verbundenes Gigaset Telefon:

    • Wählen sie eine Telefonnummer in einem Programm (z.B. Safari) aus und starten Sie den Wählvorgang über das Kontextmenü
    • Das ausgewählte Telefon wählt die ausgewählte Nummer in Freisprechbetrieb
    • (Das Kontextmenü muss in den Systemeinstellungen->Tastatur->Kurzbefehle->Dienste aktiviert sein)
    • Unterstützung von mehreren Mobilteilen mit jeweils eigenen Namen

     

    Gigaset QuickSync ist kompatibel mit den Gigaset Mobilteilen: 

    • Gigaset SL785, SL780, SL78H, SL565, SL560, SL56, SL400, SL400A, SL400H, SL375, SL370, SL37H, S810, S810A, S810H, S800, S800A, S800H, S820, S820A, S820H, SL910, SL910A, SL910H, S790, S795, S79H, SX790 ISDN, SX795 ISDN, S685, S680, SX685 isdn, SX680 isdn, S685 IP, S68H

     

    Gigaset QuickSync ist kompatibel mit den Gigaset Tischtelefonen:

    • Gigaset DL500A, DX600A ISDN, DX800A all in one, DE310, DE410, DE700, DE900 IP PRO

     

    Download
  • Quick Sync - Privacy Policy

Kompatibilität prüfen

Kombinieren Sie Gigaset Mobilteile und Basisstationen bzw. Router mit DECT-Funktion
Prüfen Sie die Kompatibilität zwischen Mobilteilen und Basisstationen anhand ausgewählter Funktionen.

Mobilteil anmelden

Sie besitzen ein Gigaset SL78H Mobilteil und wollen dieses an einer Basisstation anmelden?
Das Gigaset SL78H an einer Basis anmelden

Nicht fündig geworden?

Kontaktieren Sie den Gigaset Kundenservice für persönliche Hilfestellung.