Support for Gigaset L410

Gigaset L410
Welcome to the support resource for your Gigaset L410. On this page you will find answers to frequently asked questions. Manuals as well as software and firmware are available for download. You will also find video tutorials, which will help you to get started. Should your device have a defect, you can register your Gigaset L410 for repair. Furthermore you will find accessories for your Gigaset L410. If you're looking for products matching your Gigaset L410, have a look at our compatibility database. You can also find out how to register your Gigaset L410 with other devices.

Answers to frequently asked questions

You have questions regarding your Gigaset product? Here you will find answers.

Top 10 FAQs

  • The full compatibility is given with:

    • Gigaset C430/C430A
    • Gigaset C530/C530A
    • Gigaset C610/C610A
    • Gigaset C620/C620A
    • Gigaset E630/E630A
    • Gigaset S810/S810A
    • Gigaset S820/S820A
    • Gigaset SL400*/SL400A*
    • Gigaset SL910/SL910A
    • * Only for new SL400/SL400A manufactured since May 2011: Identifiable on the compatibility sticker on the packaging or the name SL400/SL400A top right on the base (see pictures below).
    SL400/SL400A new: SL400/SL400A old:

    Depending on your cordless DECT telephone, the following functions may be supported:

    Function / Telephone

    Gigaset C430/C430A, C530/C530A, C610/C610A, C620/C620A, E630/E630A, S810/S810A, S820/S820A,
    SL400/SL400A*,
    SL910/SL910A

    Other Gigaset-telephones / GAP-telephones from other manufacturers ISDN- and IP-telephones
    Accept call on Gigaset L410 yes yes yes
    Transfer call on Gigaset L410 yes yes yes
    One-click switch between handset and Gigaset L410 yes no no
    Join conference call/take over call yes ** yes ** no
    Include Gigaset L410 in a conference call yes yes yes

    * see also  https://www.gigaset.com/compatibility

    ** The "Listening In" function must be available on the telephone and switched on.

    The list of compatible gigaset telephones is continuously being expanded.

    Up-to-date information can be found at https://www.gigaset.com/compatibility 

     

     

     


    • If the red LED is flashing every 5 seconds, the battery is low and the L410 has to be charged.
    • If the red LED is flashing every second the L410 is registered but outside the range of the base.
  • Switch on / off the device
  • 5 volume levels are available for the ringtones and loudspeaker. When you reach

    the highest or lowest volume level you will hear a signal tone.

  • The GIGASET L410 will be fully charged wihtin 2.5 hours. You can interrupt the charging procedure and go on with it afterwards.

  • There are two ringtones, one for external and one for internal calls.

  • 5 volume levels are available for the ringtones and loudspeaker. When you reach

    the highest or lowest volume level you will hear a signal tone.

     

  • How is the battery status shown with the LED?
  • How is the battery inserted correctly?

all FAQs by Topic

  • L
    • Light indicator (LED)
      • Which status have the LEDs?
        • If the red LED is flashing every 5 seconds, the battery is low and the L410 has to be charged.
        • If the red LED is flashing every second the L410 is registered but outside the range of the base.
  • O
    • Overview
    • Operating the device
      • 5 volume levels are available for the ringtones and loudspeaker. When you reach

        the highest or lowest volume level you will hear a signal tone.

         

      • 5 volume levels are available for the ringtones and loudspeaker. When you reach

        the highest or lowest volume level you will hear a signal tone.

      • There are two ringtones, one for external and one for internal calls.

      • Switch on / off the device
  • P
  • R
    • Registering
      • Using your telephone’s handset

        • Carry out the standard deregistration procedure for handsets, as described in the operating instructions for the handset.
        • As soon as you have inserted the battery, the devices becomes ready for registration for a 5 minute period.


        • The LED indicates readiness for registration by flashing (green, 3 x per second). Following this, the device swichtes off.


        • When you switch the device on again (by pressing the answer/end call key by at least 3 seconds) it is ready for registration again.


        • For registration, stand close to your telephone's base
          •  Start the registration process with the base described in your base's operating manual. (On most DECT telephones by holding down the paging key); the base will take up to one minute to complete registration.
      • The LED flashes (green, every 5 seconds) and one confirmation tone is emitted

        (sequence of tones rising in pitch).

         

        The device is shown in the internal list of handsets registered to the base.

        • Registration failed


        • A negative confirmation tone is emitted (sequence of tones falling in pitch).


        • If the device cannot be registered within 5 minutes, it switches off. If the registration was not successful, try again.


        • If necessary, switch on the device again. It is immediately ready for registration.


        • Check whether the registration PIN on the base is set to 0000.


        • Move closer to the base with the Gigaset L410.


        • If the device is already registered to another base, you must de-register it. Following this, it will be ready for registration again.
    • Reset procedures
    •  batteri
    •  Kompatibilitet
      • The full compatibility is given with:

        • Gigaset C430/C430A
        • Gigaset C530/C530A
        • Gigaset C610/C610A
        • Gigaset C620/C620A
        • Gigaset E630/E630A
        • Gigaset S810/S810A
        • Gigaset S820/S820A
        • Gigaset SL400*/SL400A*
        • Gigaset SL910/SL910A
        • * Only for new SL400/SL400A manufactured since May 2011: Identifiable on the compatibility sticker on the packaging or the name SL400/SL400A top right on the base (see pictures below).
        SL400/SL400A new: SL400/SL400A old:

        Depending on your cordless DECT telephone, the following functions may be supported:

        Function / Telephone

        Gigaset C430/C430A, C530/C530A, C610/C610A, C620/C620A, E630/E630A, S810/S810A, S820/S820A,
        SL400/SL400A*,
        SL910/SL910A

        Other Gigaset-telephones / GAP-telephones from other manufacturers ISDN- and IP-telephones
        Accept call on Gigaset L410 yes yes yes
        Transfer call on Gigaset L410 yes yes yes
        One-click switch between handset and Gigaset L410 yes no no
        Join conference call/take over call yes ** yes ** no
        Include Gigaset L410 in a conference call yes yes yes

        * see also  https://www.gigaset.com/compatibility

        ** The "Listening In" function must be available on the telephone and switched on.

        The list of compatible gigaset telephones is continuously being expanded.

        Up-to-date information can be found at https://www.gigaset.com/compatibility 

         

         

         


Downloads

Get manuals or software updates for your Gigaset product.

Check compatibility

Check if a particular Gigaset handset is compatible with a Gigaset base station.
Check compatibility
Check compatibility of handset and base station by selecting individual functions.
Check compatibility by function

Register handet to base station

You have a Gigaset L410 handset and want to register a base station?
Register base station to the Gigaset L410

Didn't find what you were looking for?

Please contact our Customer Services for personal assistance.