Service für Gigaset L800HX

Gigaset L800HX
Willkommen beim Kundenservice für Ihr Gigaset L800HX. Auf dieser Seite finden Sie Antworten zu häufig gestellten Fragen. Sowohl Bedienungsanleitungen wie auch Soft- und Firmware stehen zum herunterladen bereit. Ebenfalls finden Sie hier Videotutorials, die Ihnen bei der Einrichtung helfen. Wenn Ihr Produkt einen Defekt aufweist, können Sie Ihr Gigaset L800HX zur Reparatur anmelden. Außerdem finden Sie hier ubehör für Ihr Gigaset L800HX. Sollten Sie nach Produkten für Ihr Gigaset L800HX suchen, finden Sie Informationen dazu in unserer Kompatibilitätsdatenbank. Hier finden Sie auch Hilfestellung zum Registrieren Ihres Gigaset L800HX mit anderen Geräten.

Antworten auf häufig gestellte Fragen

Sie haben Fragen zu Ihrem Gigaset Produkt? Hier erhalten Sie Antworten.

Top 10 FAQs

  • A DTMF dialing during the call is not possible.
    The use of T-Net Codes and T-ISDN Codes, e.g. call forwarding, call on busy, use with door intercom, request from answering machines,
    PIN entries, e.g. conference systems, are currently not supported.

  • Unfortunately, Amazon does not allow other smart speakers with this function.

  • Without a connection to the Internet, the L800HX can only be used as a loudspeaker via AUX IN or bluetooth. No calls are signalled and dialing is not possible.

  • This function is not supported by voice command. To activate bluetooth, press the mode button repeatedly until the light ring lights up blue.

  • There is only the wake word "Alexa", other wake words cannot be set.

  • If you have assigned a name to an internal handset in the L800HX app, the L800HX app automatically generates a phone number in the contacts of your smartphone. If, for example, the INT1 handset in the L800HX app is named "living room", you will also find a contact with the name "living room" in the contact list of your smartphone. This phone number has 10 digits. The command would be: "Alexa, call living room."
    Please note that each new contact (smartphone contacts) is only synchronized after the Amazo Alexa App has been opened, and can only then be called via voice dial via the L800HX.

  • The list of mobile phone contacts is syncronized automatically when you open the Amazon App. It is not possible to syncronize single contacts.

  • Key commands in conjunction with AVM routers such as **9, which are sent to all phones, do not work.
    You cannot also toggle in the analog telephone line.

  • Please check the internet filter of the FritzBox and set this filter for the L800HX to unrestricted access if necessary.

  • No. This function was not provided for.

alle FAQs nach Themen

  • B
    • Bluetooth
      • This function is not supported by voice command. To activate bluetooth, press the mode button repeatedly until the light ring lights up blue.

  • C
    • Contacts
      • No. This function was not provided for.

      • The list of mobile phone contacts is syncronized automatically when you open the Amazon App. It is not possible to syncronize single contacts.

      • The synchronization of contacts between a smartphone and Amazon Alexa, basically affects all contacts. If you only want to use selected contacts, you have to enter them manually in the contact list of the Alexa app.

    • Compatibility / System requirements
      • Unfortunately, Amazon does not allow other smart speakers with this function.

      • Please check the internet filter of the FritzBox and set this filter for the L800HX to unrestricted access if necessary.

  • D
    • DTMF dialling
      • A DTMF dialing during the call is not possible.
        The use of T-Net Codes and T-ISDN Codes, e.g. call forwarding, call on busy, use with door intercom, request from answering machines,
        PIN entries, e.g. conference systems, are currently not supported.

  • I
    • Internal calling
      • If you have assigned a name to an internal handset in the L800HX app, the L800HX app automatically generates a phone number in the contacts of your smartphone. If, for example, the INT1 handset in the L800HX app is named "living room", you will also find a contact with the name "living room" in the contact list of your smartphone. This phone number has 10 digits. The command would be: "Alexa, call living room."
        Please note that each new contact (smartphone contacts) is only synchronized after the Amazo Alexa App has been opened, and can only then be called via voice dial via the L800HX.

    • Incoming & outgoing calls
      • Without a connection to the Internet, the L800HX can only be used as a loudspeaker via AUX IN or bluetooth. No calls are signalled and dialing is not possible.

  • K
    • Kompatibilität
      • The L800HX also works on other DECT compatible bases, such as AVM FritzBox (with current software).

      • Key commands in conjunction with AVM routers such as **9, which are sent to all phones, do not work.
        You cannot also toggle in the analog telephone line.

  • V
    • Voice Dailling
      • There is only the wake word "Alexa", other wake words cannot be set.

Downloads

Hier erhalten Sie Bedienungsanleitungen und Software-Updates.

Nicht fündig geworden?

Kontaktieren Sie den Gigaset Kundenservice für persönliche Hilfestellung.